Eiki Projector EK-610U User Manual

— 36 — 
DLP Projector — Owner’s Manual
PICTUREOUTPUT SETUP
OPTIONLens Function
No
No
Focus
Zoom
Lens Shift
Lens Calibration
Lens Lock
ItemDescrIptIon
FocusAdjust focus function on the projected image.
ZoomAdjust zoom function on the projected image.
Lens ShiftShift the projected image.
Lens CalibrationPerform calibration and return lens to the center position.
Lens LockSelect this function to prevent all lens motors from moving.
• Yes: Lens shift will be locked.
• No: Lens shift can be used by user.
Menu...

— 37 — 
DLP Projector — Owner’s Manual
Pin Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press the 
Enter button to enter the SETUP menu. Press the arrow keys (pq) to select Pin and press the Enter button 
to enter the Pin menu. Press the arrow keys (pq) to select the menu option and press the Enter button 
to enter its submenu. Press the arrow keys (pqtu) to select or adjust the desired settings and press the 
Enter button to confirm.
PICTUREOUTPUT SETUP...

— 38 — 
DLP Projector — Owner’s Manual
Communications Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press 
the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select Communications and 
press the Enter button to enter the Communications menu. Press the arrow keys (pq) to select the 
menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or 
adjust the desired settings and press the Enter button...

— 39 — 
DLP Projector — Owner’s Manual
Option Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press 
the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select the menu option 
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the 
desired settings and press the Enter button to confirm.
Auto Source
High Altitude
Test Pattern
Background Color
Hot-Key settings
Power Settings
Light Source...

— 40 — 
DLP Projector — Owner’s Manual
Power Settings Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press 
the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select Power Settings and 
press the Enter button to enter the Power Settings menu. Press the arrow keys (pq) to select the menu 
option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust 
the desired settings and press the Enter...

— 41 — 
DLP Projector — Owner’s Manual
Light Source Settings Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press 
the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select Light Source Settings 
and press the Enter button to enter the Light Source Settings menu. Press the arrow keys (pq) to 
select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) 
to select or adjust the desired settings and...

— 42 — 
DLP Projector — Owner’s Manual
Control Your Projector Using Web Browser
Ethernet
Projector
Wired LAN Terminal functionalities
Remote control and monitoring of a projector from a PC (or Laptop) via\
 wired LAN is also possible.
Compatibility with Crestron control boxes enables not only collective pr\
ojector management on a network 
but also management from a control panel on a PC (or Laptop) browser s\
creen.
• Crestron is a registered trademark of Crestron Electronics, Inc. of the \
United...

— 43 — 
DLP Projector — Owner’s Manual
2. On the PC (Laptop), select Start → Control Panel → Network and Internet.
3. Right-click on Local Area Connection, and select Properties.
4. In the Properties window, select the Networking tab, and select Internet Protocol (TCP/IP).  

— 44 — 
DLP Projector — Owner’s Manual
5. Click Properties.
6. Click Use the following IP address and fill in the IP address and Subnet mask, then click OK.
7. Press the Menu button on the projector.
8. Select SETUP → Communications → LAN.  

— 45 — 
DLP Projector — Owner’s Manual
9. After getting into LAN, input the following:
• DHCP: Off
• IP Address:  10.10.10.10
• Subnet Mask: 255.255.255.0
• Default Gateway: 0.0.0.0
10.  Press the Enter / ► button to confirm settings.
Open a web browser (for example, Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher).
11.  In the Address bar, input the IP address: 10.10.10.10.
12.  Press the Enter / ► button.
The projector is setup for remote management. The LAN/RJ45 function displays as...