Eiki Projector EK-502X User Manual

							41
Image Adjust
1 Press the MENU button on remote controller and the OSD displays. Press  button to select 
the Image Adjust icon, press  button or OK button to confirm your selection. 
2 Press  button to select item for adjustment, press  button or OK button to confirm your 
selection. The adjustment dialog box prompts. Press  button to adjust settings. 
设置Contrast                                                                \
 32
Brightness                                                             3\
2
Color temp.                                                         Mid.\
Red                                                                     \
  32
Green                                                                   \
32
Blue                                                                    \
  32
Sharpness                                                              8\
GammaImage adjust
设置
Contrast                                                                \
 32
Brightness                                                             3\
2
Color temp.                                                         Mid.\
Red                                                                     \
  32
Green                                                                   \
32
Blue                                                                    \
  32
Sharpness                                                              8\
Gamma
Image adjust
Contrast
Press  button to decrease contrast, press  
button to increase contrast.
Brightness
Press 
 button to decrease brightness, press  button to increase brightness
Color Temp.
Press 
 button to select required color tem -
perature (Cold, Mid. and Warm) 
Red
Press 
 button to lighten red tint and  button 
to darken it.
Green
Press 
 button to lighten green tint and  but-
ton to darken it.
Blue
Press 
 button to lighten blue tint and    button 
to darken it. 
Sharpness
Press 
 button to soften image and  button to 
sharpen it.
Gamma
Press 
 button to adjust gray scale for better 
contrast balance. 
Input source (Computer signals)  
						

							42
Screen size adjustment
Your projector comes with screen size adjustment function for you to disp\
lay required image size. 
1 Press the MENU button on remote controller and the OSD displays. Press 
 button to select 
Screen icon, press  button or OK button to confirm your selection. 
2 Press  button to point to required item and press OK button to confirm your selection.
NormalThis function keeps aspect ratio of the projected 
image consistent with its input source. 
TrueDisplay image in its original size. If the orig -
inal size of a image is greater than screen 
image of your projector (XGA:1024x768/
WXGA:1280x800), the later enters the Image 
Display Area Selection mode. Press 
 
button to select image display area. The arrow 
mark turns red during adjusting. It disappears 
when the adjustment limit is reached.
WideProvide image in aspect ratio of 16:9 by ex -
panding image width proportionally.
FullProject image in full screen. 
CustomAdjust screen aspect ratio and position manu -
ally. Press  button in customization area and 
Custom options display. Press  button to 
select required items.
Horizontal ratio / Vertical ratio:
        Adjust horizontal and vertical screen ratio.
Horizontal and Vertical:
       The aspect ratio option will be disabled when 
the horizontal and vertical screen ratio is set 
to On. The vertical ratio option dims and ap -
pears unavailable. Adjust the horizontal ratio 
and the screen size is adjusted according to 
the aspect ratio.
Horizontal position / Vertical position: 
        
Adjust horizontal / vertical position of image.
设置
Normal 
True
Wide
Full
Custom 
Digital zoom +
Digital zoom -
Screen
Common:   Save adjustment ratio applicable with 
all input. Point to common and press 
OK button to display a confirm menu. 
Press Yes then OK to save your ratio 
settings. The saved ratio will be used 
when Custom is selected by user. 
Reset:   Reset your adjustments to its initial status. 
Point to Reset and press OK to display a 
confirm menu. Press OK to reset. 
Digital Zoom +Select Digital Zoom +. The OSD is replaced by 
the Digital Zoom + message. Press OK button to 
zoom in. 
Press 
 button to span the image. This 
function is available only when the image is of 
size greater than the screen. 
Digital Zoom –Select Digital Zoom –. The OSD is replaced by 
the Digital Zoom – message. Press OK button to 
zoom out.
Press any key, except the OK one, to exit the 
Digital Zoom mode. 
To reset to original screen size, select Screen 
size in the Screen Size Adjustment menu, select 
Input again in the Input menu, or press OK button 
to adjust its size. 
 Note: 
 
● Your projector does not support resolution greater than 1920x1200. For computer display of res-
olution greater than 1920x1200, downgrade it before connecting to your p\
rojector.
 
● Image data other than physical resolution will be modified to fit screen size give in reset mode. 
 
● Option True, Full Screen, and Digital Zoom will be unavailable if no signals is detected in the PC 
system menu.
Input source (Computer signals)  
						

							43
Input source (VIDEO signals)
Basic operation
Press the INPUT button on control panel to select Component, S-Video or VIDEO. Press COMPO-
NENT, S-VIDEO or VIDEO button on remote controller to select individual item\
 directly.
Menu operation
1 Press the MENU button on remote con-
troller and the OSD displays. Press  
button to point to the Input icon, press  
button or OK button to access the Input 
menu.
2 Press 
 button to select Component, 
S-Video or VIDEO, then press OK button 
to select input source. 
360.2
141.7VOL- VOL+AUDIO
AUDIO
IN2
AUDIO
IN1 AUDIO
OUT
S-VIDEO
VIDEO R/C
IN R/C
OUT
RS-232C
DVI-D
P/PR
MONITOR OUT
VGA 
IN
G/Y
B/PBH/HV V
INPUT OK Component 
VIDEO
S-VIDEO
OK 
设置HDMI
DVI
VGA
Component
S-video
Video
RGBHV
System                                                         Auto Input
Input Select menu
Component
VIDEO
S-VIDEO
Select Component when a video signal 
source is connected to the Y, Cb/Pb, Cr/Pr 
port with a VGA cable.
Select S-Video when video signal is connect
-
ed to the S-Video port. Select Video when video signal is connected 
to the video port.  
						

							44
Video system selection
1 Press the MENU button on remote controller and the OSD displays.  Press  button to point 
to the Input icon, press  button or OK button to confirm your selection. 
2 Press  button to select Component, VIDEO, or S-Video, and then press OK button. 
3 Press  button to select system, and then press OK button. Press  button to select re-
quired signal format, and then press OK button.
VIDEO or S-Video
Auto
Your projector may auto detect the input vid -
eo system and adjust to the optimum status.  
For PAL-M or PAL-N video system, select the 
system manually. 
PAL/SECAM/NTSC/NTSC4.43/PAL-M/
PAL-N
If image cannot be displayed correctly, you 
may need to select one from PAL, SECAM, 
NTSC, NTSC 4.43, PAL-M and PAL-N for 
playing. VIDEO system menu (VIDEO or S-VIDEO)
VIDEO system menu (Component)
Input source (VIDEO signals)
设置InputAuto
PA L
SECAM
NTSC
NTSC4.43
PAL - M
PAL - NSystem
Video
设置Input
Auto
PA L
SECAM
NTSC
NTSC4.43
PAL - M
PAL - N
SystemVideo
Auto
1080i
1035i
720p
576p
480p
576i
480iSystem Component
Input
Auto
1080i
1035i
720p
576p
480p
576i
480i
System 
Component
InputComponent
Auto
Your projector may auto detect the input 
component video signal and adjust to the 
optimum status. 
Component video signal format If image cannot be displayed correctly, you 
may need to select one signal format from 
480i, 576i, 480p, 576p, 720p, 1035i  and 
1080i.  
						

							45
Image select 
1 Press the MENU button on remote controller and the OSD displays.  Press  button to select 
the Image icon, press  button then press OK button. 
2 Press  button to point to required item, then press OK button.
Input source (VIDEO signals)
设置
Dynamic
Normal
Cinema
Blackboard(Green)
Colorboard                                                          Red
User Image
Image select
Dynamic An image mode suitable for viewing in bright rooms.  
Normal The default image mode of your projector. 
CinemaVivid image mode 
Blackboard 
(Green)Improve quality of image projected on blackboard (Green).
(This is designed for a board in green rather than black as indicated b\
y 
its name.)
Colorboard
A image mode suitable for image projecting on the surface of a wall in 
red, blue, yellow or green.
User Image 
Image mode set by users in the Image Adjust menu.   
						

							46
Input source (VIDEO signals)
Image Adjust
1 Press the MENU button on remote controller and the OSD displays. Press  button to select 
the Image Adjust icon, press  button or OK button to confirm your selection. 
2 Press  button to point to required item, press  button or OK button to confirm your selec -
tion.
3 Press 
 button to adjust settings, then press OK button; or press  button to adjust settings 
in the pop-up adjustment menu.
设置Image adjust
Contrast 32
Brightness 32
Color 32
Tint 32
Red 32
Green 32
Blue 32
Sharpness 8
Gamma 8 Noise reduction                                                        O\
n
Progressive L1
Contrast  Press  button to decrease contrast and  button to increase it.
BrightnessPress  button to decrease brightness, press  button to increase it.
Color  Press  button to decrease color saturation and  button to increase it.
Tint Press  button to adjust image to required tint. 
White balance 
(Red)Press  button to lighten the red color and  button to darken it. 
White balance 
(Green)Press  button to lighten green tint and  button to darken it.
White balance 
(Blue)Press  button to lighten the blue color and  button to darken it.
Sharpness 
Press  button to soften image and  button to sharpen it.
GammaPress  button to adjust gray scale for better contrast balance.
Noise 
ReductionSelect Noise Reduction to cut snow interference to your screen for even \
smoother and clearer image. 
ProgressiveDisplay lined video signal as stepped image. You may select one of the 
following according to type of signal: 
Off
 ...................... Disable the function  
L1 ....................... Project dynamic image  
L2 ....................... Project still image 
Quality image .....  For movie viewing This function enables your projector to 
treat image for high quality representation with less image 
distortion.  
						

							47
NormalSelect this function to maintain the aspect ratio of the projected image 
consistent with its input source. 
Full
Project image in full screen.
WideProvide image in aspect ratio of 16:9 by expanding image width propor
-
tionally.
Custom Adjust screen aspect ratio and position manually.
Press 
 button in customization area and Custom options display. Press  button to select required items.
Horizontal ratio/vertical ratio:   
        Adjust horizontal and vertical screen ratio.  
The aspect ratio option will be disabled when the horizontal and 
vertical screen ratio is set to On. The vertical ratio option dims and 
appears unavailable. Adjust the horizontal ratio and the screen size 
is adjusted according to the aspect ratio.
Horizontal / Vertical position:   
     Adjust horizontal /vertical position of image.
Common:   Save adjustment ratio applicable with all input. Point to Com -
mon and press OK button to display a confirm menu. Press 
Yes then OK to save your ratio settings. The saved ratio will 
be used when Custom is selected as user.
Reset:   Reset your adjustments to its initial status. Point to Reset and 
press OK button to display a confirm menu. Point to Yes and 
press OK button to reset. 
Input source (VIDEO signals)
Screen size adjustment
Your projector comes with screen size adjustment function for you to disp\
lay required image size.
1. Press the MENU button on remote controller and the OSD displays.  Press  button to select 
Screen icon, press  button or OK button to confirm your selection. 
2.  Press  button to point to required item and press OK button to confirm your selection. 
设置ScreenNormal
Full
Wide
Custom
Screen 
 Note:  
● If no signals was detected, the Auto setting will be accepted automatically and the adjustment 
pop-up menu disappears.
 
● Adjustment range of the horizontal /vertical position ratio and position\
 varies with input signal.  
						

							48
 Language
Select the Setting menu to set up other functions of your projector. 
1. Press the MENU button on remote controller and the OSD displays. Press 
 button to select 
Setting, press  button or OK button to enter the submenu.
2.  Press  button to point to required item, press  button or OK button to confirm your selec -
tion. 
3.  Press 
 button to point to required item, press OK button to confirm your selection.
Menu Position 
Select this option to change position of OSD.  
Point to Menu Position and press ENTER button. 
Press the ENTER button to change OSD position 
in sequence as shown below: 
Upper left → Upper right → Center → 
Lower left → Lower right → Upper left 
→ .....
Translucency
Change translucency of OSD menu. Press 
 
button to select Off, High, Medium, or Low. 
Background Color
Change background color of the OSD menu.  
Press 
 button to select color in code 0~6. 
Setting
设置Setting
1 / 3
Language English
OSD setting
Auto setup
Keystone    
Blue Back                                                                    \
     On
Display On
Logo
Ceiling Off
Rear Off
Wireless remote control
Power management                                          Off
⑩
⑪ ①
⑤
⑦ ⑥
⑧ ②
③
④
⑨
Your projector comes with multiple language support. You may select required one from 
them. 
  OSD Setting
Press  button to point to the Setting menu, press OK button or  button.
设置SettingOSD settingMenu position
Translucent          Off
Background Color                        0  
						

							49
 Auto Setup
Setting
设置SettingAuto setupInput search                                  On
Auto PC adj.                                  On
Auto Keystone                                   On
Press the AUTO button on your remote controller to execute functions including Auto Searching, Auto 
PC Adjusting, and Auto Keystone. These function settings may convert according to steps shown 
below: 
Input Search
Select this function to auto detect input signal. 
Stop searching after valid signal was found. 
Press 
 button to select the following options: Off  ..........   Disable the input search function. 
On ..........  
Enable the input search function.  This 
function detects input signals automat -
ically and stops searching after any 
successful detection. 
Auto  PC AdjustingOn ..........   Press the AUTO button on remote con-
troller to enable the Auto PC Adjusting 
function. 
Off  ..........   Disable the Auto PC Adjusting function.
Auto KeystoneOff .......... Disable the Auto Keystone function.
Auto .......  
Execute auto keystone adjustment ac-
cording to inclination of your projector. 
Manual  ...  Press the AUTO button on remote 
controller to enable this function.
 Note: 
–  Your projector detects only the input source you selected last time.
–  Press the INPUT button on the control panel during input source searching, then the lat\
ter stops and the input 
signal you used last time will be selected.  
–  You cannot disable Input Search and Auto PC Adjusting concurrently. 
–  Fine Sync, Total Dots, Horizontal and Vertical position of certain computers may be fully adjusted by the Auto 
PC Adjusting function. In case the post-adjustment image still looks incorr\
ect, adjust it again manually.  
						

							50
 Keystone
Setting
设置SettingKeystone
Keystone                                                     Store
H/V Keystone
Corner Keystone
Keystone...............  store/reset
H/V Keystone ........ Press  button to 
adjust vertical and horizon -
tal keystone.
Corner Keystone ... Press 
 button to 
adjust keystone at four 
corners of the screen. The 
four corners are looped in 
sequence shown below:
Upper left → Upper right 
→ Lower right → Lower 
left→ ...
Press 
 button to 
adjust keystone at upper 
left corner, 
 button to 
adjust keystone at upper 
right corner, 
 button to 
adjust keystone at lower 
right corner, 
 button to 
adjust keystone at lower 
left corner. 
Select this function to save or reset keystone adjustment of projection \
after your projector is dis
-
connected from AC power. Press 
 button to navigate available options. 
  Blue Back
 Display
Set default background color of your projector when no signals are detec\
ted, Press  button to 
navigate available options.
On .......... Enable blue projection background color. 
Off  .......... Disable blue projection background color.  
Select this function to display the Logo screen (including a countdown \
timer) when power on your 
projector. 
On .......... Display the logo screen when power on. 
Off  .......... Do not display the logo screen when power on.