Eiki Projector EK-400X User Manual

— x — 
Compliance 
FCC Caution 
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio 
frequency energy, and if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is...

–xi – 
The Wires in this mains lead are coloured in accordance with the following code: 
Green-and-yellow ......... Earth  
Blue .............................. Neutral 
Brown ........................... Live 
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured 
markings identifying the terminals in your plug proceed as follows: 
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is 
marked by the letter E or by...

— xii — 
Table of Contents 
GETTING STARTED ........................................................................................................................................................... 1 
PACKING CHECKLIST ........................................................................................................................................................... 1 
VIEWS OF PROJECTOR PARTS...

–xiii – 
SPECIFICATIONS ............................................................................................................................................................. 58 
SPECIFICATIONS ................................................................................................................................................................. 58 
PROJECTION DISTANCE VS. PROJECTION SIZE...

– 1 – 
GETTING STARTED 
Packing Checklist 
Carefully unpack the projector and check that the following items are included:  
 
DLP PROJECTOR AND LENS CAP 
   
  
 
REMOTE CONTROL  
(WITH TWO AAA BATTERIES) 
RGB CABLE POWER CORD 
 
 
  
CARRYING CASE CD-ROM  
(THIS USER’S MANUAL) 
QUICK START GUIDE 
 
Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. It 
is recommend that you keep the original packing material should you ever need to return the...

— 2 — 
Views of Projector Parts  
Front-right View 
 
ITEM LABEL DESCRIPTION SEE PAGE 
1.  Height-adjuster button Push to release height adjuster 
15 
2.  Height adjuster Adjusts level of projector 
3.  Lens Projection Lens 
4.  IR receiver Receive IR signal from remote control 7 
5.  Focus ring Focuses the projected image 
16 
6.  Zoom ring Enlarges the projected image 
7.  Function keys See Top view—OnJscreen Display (OSD) but-
tons and LEDs. 3 
Important: 
Ventilation openings on the projector allow...

– 3 – 
Top view—On-screen Display (OSD) buttons and LEDs 
 
ITEM LABEL DESCRIPTION SEE PAGE 
1.  ▲ (Up cursor) /  
KeystoneH 
Navigates and changes settings in the OSa 
Quick Menu – For Keystone 
18 
2.  ► (Right cursor) /  
VolumeH 
Navigates and changes settings in the OSa 
Quick Menu – For Volume 
3.  ▼ (Down cursor) / 
KeystoneJ 
Navigates and changes settings in the OSa 
Quick Menu – For Keystone 
4.  MENU Opens and exits OSD menus 
5.  Enter Enter or confirm highlighted OSD menu item 
6.   (Power...

— 4 — 
Rear view 
 
ITEM LABEL DESCRIPTION SEE PAGE 
1.  AC IN Connect the POWER cable 11 
2.   (USB) Connect the USB cable from a computer  
3.  VGA OUT Connect the RGB cable to a display 
(Loop Thru only for VGA IN-1) 
4.  LAN Connect a LAN cable from Ethernet 
5.  VGA IN 1 Connect the RGB cable from a computer or component device 
6.  VGA IN 2 Connect the RGB cable from a computer or component device 
7.  DP Connect a DISPLAYPORT CABLE from a DISPLAYPORT device 
8.  AUDIO IN Connect an AUDIO cable...

– 5 – 
Note: 
 To use this feature, you must plug in the connector before turn on/off the projector. 
 Screen controllers are supplied and supported by screen manufacturers. 
 Do not use this jack for anything other than intended use. 
 
Warning: 
As a safety precaution, disconnect all power to the projector and connecting devices before making 
connections. 
  

— 6 — 
Bottom view 
 
ITEM LABEL DESCRIPTION SEE PAGE 
1.  Tilt adjustor  Rotate adjuster lever to adjust angle position.  15 
2.  Ceiling support holes Contact your dealer for information on mounting the projector on a 
ceiling 
3.  Height adjustor Adjuster drops down when adjuster button is 
pushed. 15 
4.  Height adjustor button Push to release adjustor. 
 
Note: 
When installing, ensure that you use only UL Listed ceiling mounts. 
For ceiling installations, use approved mounting hardware and M4...