Eiki Projector EK-400X User Manual

 
— i — 
Features and Design 
This Multimedia Projector is designed with the most advanced technology for portability, durability, and 
ease of use. This projector utilizes a high luminance and Eco friendly system, a palette of 1.07 billion 
colors, and digital light processing (DLP) technology 
Compact Design 
This projector is designed compact in size and 
weight. It is easy to carry and installed 
anywhere you wish to use. 
Simple Computer System Setting 
The projector has the Multi-scan system to...

— ii — 
Copyright  
This publication, including all photographs, illustrations and software, is protected under international 
copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may 
be reproduced without written consent of the author. 
©  Copyright 2015 
Disclaimer 
The information in this document is subject to change without notice. The manufacturer makes no 
representations or warranties with respect to the contents hereof and specifically...

–iii – 
Important Safety Information 
Important: 
It is strongly recommended that you read this section carefully before using the projector. These 
safety and usage instructions will ensure that you enjoy many years of safe use of the projector. 
Keep this manual for future reference. 
Symbols Used 
Warning symbols are used on the unit and in this manual to alert you of hazardous situations.  
The following styles are used in this manual to alert you to important information. 
Note: 
Provides additional...

— iv — 
Safety Instructions 
Please read this manual completely before installing and operating the projector. 
The projector provides many convenient features and functions. Proper operation may enable you to fully 
utilize the features and keep it in good condition. Otherwise, it will not only shorten the service life of the 
unit, but also may cause malfunction, a fire, or other accidents. 
If your projector cannot work properly, please read this manual again, check the operating methods and 
cable...

–v – 
   Safety precautions 
Caution:  
  The projector must be grounded. 
  Do not expose the projector to raindrops or high humidity to avoid a fire or electric shock. 
- This projector produces intense light from the projection lens. Avoid staring directly into the lens, 
otherwise eye damage could be caused. Be especially careful that children do not stare directly into the 
beam. 
- Place the projector in a proper position. Otherwise it may result in fire hazard. 
- Leave an appropriate space from...

— vi — 
Safety Guide 
All the safety and operating instructions should be read before the product is operated. 
Read all of the instructions given here and retain them for later use. Unplug this projector from AC power 
supply before cleaning. Do not use liquid or aerosol cleaners. 
Use a damp cloth for cleaning. 
Follow all warnings and instructions marked on the projector. 
For added protection to the projector during a lightning storm, or when it is left unattended and unused for 
long periods of...

–vii – 
- If the projector does not operate normally by following the operating instructions. Adjust only those 
controls that are covered by the operating instructions as improper adjustment of other controls may 
result in damage and will often require extensive work by a qualified technician to restore the projector to 
normal operation. 
- If the projector has been dropped or the cabinet has been damaged. 
- When the projector exhibits a distinct change in performance - this indicates a need for...

— viii — 
 
 
   
Moving the projector 
When moving the projector, take care of the lens and retract the adjustable foot to prevent damage to the 
lens and cabinet. 
Installing the projector properly 
Please set the projector on nearly-level. 
Be sure to install the projector properly. Improper installation may reduce the lamp lifetime and even cause 
a fire hazard. 
 
Do not roll the projector over 15 degrees from rear to front. 
 
Do not point the projector up to project an image. 
 Do not point the...

–
ix  – Caution in moving or transporting the projector  
-
  Do not drop or bump the projector, otherwise damages or malfunctions may result.  
-
  When carrying the projector, use a suitable carrying case.  
-
  Do  not transport the p rojector by  courier or any other transport service in an unsuitable 
transport case. This may cause damage to the projector. For information about transporting 
the projector by courier or any other transport service, consult your dealer.  
-
  Do not put the proj ector...