Eiki Projector Eip Wx5000 User Manual

							39
Resize Mode
Press RESIZE  on the remote control.
•Pressing  RESIZE changes the display as shown
in the tables below.
• To  return to the standard image, press  UNDO
while “RESIZE” is displayed on the screen.
• This function can also be accessed from the OSD
menu (see page  56).
This function allows you to modify or customize the resize mode to enhance the input image. Depend-
ing on the input signal, you can choose a desired image.
COMPUTER
STRETCH
Output screen image
Input signal
Image Type
NORMAL FULL
4:3 aspect ratio
5:4 aspect ratio
15:9 aspect ratio
16:10 aspect ratio
Computer
Resolution
XGA and below
Resolution
higher than XGA
SXGA
(1280  
 1024)
1280  
 720
1280  
 800
1360 

 768
1366  
 768
1280  
 768
DOT BY DOT
*1*1
*1
*3
*1
*1
*2
— *2
—
*2
— *2
—
16:9 aspect ratio
*1
*1
:  Cutout area on which images cannot be projected
:  Area where the signals are off screen*1 The Image Shift function can be used for these images.*2 Same as NORMAL mode.*3 In case SXGA+ input.
4:3 aspect ratio
Other aspect ratios
Main resolution
SVGA (800  × 600)
XGA (1024  × 768)
SXGA (1152  × 864)
SXGA+ (1400  × 1050)
SXGA (1280  × 1024)
1280  × 720
1360  × 768
1366  × 768
1280  × 768
1280  × 800
NORMAL
1068  × 800
1000  × 800
1280  × 720
1280  × 722
1280  × 720
1280  × 768
1280  × 800
FULL
1280  × 800
—
STRETCH
1280  × 720
—
1280  × 720
DOT BY DOT
800  × 600
1024  × 768
1152  × 864
1400  × 1050
1280  × 1024
—
1360  × 768
1366  × 768
—
RESIZE button Mouse/adjustment button 
(
' /" /\ /| )
UNDO button 
						

							40
VIDEO/DTV
: Cutout area on which images cannot be projected
: Area on which the image is not included in the original signals
*1 The Image Shift function can be used for these images.*2 Same as NORMAL mode.*3 No support mode.
Output screen image Input signal
Video/DTV
480I, 480P,
576I, 576P,
NTSC, PAL,
SECAM
720P, 1035I,
1080I, 1080P
540P
STRETCH
*2
—*1
*1
*1
SMART STRETCH
*3
—
4:3 aspect ratio
Letter boxSqueeze
16:9 aspect ratio 16:9 aspect ratio
16:9 aspect ratio
(4:3 aspect ratio in 16:9)
Image Type
16:9 aspect ratioNORMAL
*1
*1
*1
*1
AREA ZOOMV-STRETCH
*1
*1
*1
About Copyrights
•When using the RESIZE function to select an image size with a different aspect ratio to a TV program or video
image, the image will look different from its original appearance. Keep this in mind while choosing an image
size.
•The use of the Resize or Keystone Correction function to compress or stretch the image for commercial
purposes/public displays in a café, hotel, etc. may be an infringement of copyright protected by law for copyright
holders. Please use caution.
Image Projection 
						

							41
Note
Hiding the Projected
Image (Shutter function)
This function allows you to tempo-
rarily hide the projected image.
1Press SHUTTER CLOSE .
•The projected image is hidden.
2Pressing  SHUTTER OPEN   will
turn the projected image back
on.
In the following cases, hiding will be cancelled
automatically.
• When  STANDBY-ON  on the projector or on
the remote control is pressed.
• When a caution or information message is
displayed.
• When the power is turned on.
Displaying and Setting
the Break Timer
This function allows you to show the re-
maining time for break during meeting.
1Press  BREAK TIMER .
2While “” is displayed, press  ',
" , \  or  | to set the break timer.
• You can set anywhere between 1 and
60 minutes (in 1 units).
• The break timer starts to count down as
soon as 
'
' '
'
' , 
"
" "
"
" , 
\
\ \
\
\  or 
|
| |
|
|  is pressed.
Note
•Pressing  UNDO will cancel the break timer.
• Auto Power Off function will be temporarily dis-
abled during the break timer.
When no input signal is detected for more than
15 minutes, the projector will automatically enter
the standby mode if the break timer has elapsed.
• The break timer will be displayed on the
startup image. To change the screen dis-
played during the break timer, change the
setting of “Startup Image” (see page  58).
• When “Slave” is set for “Stack Setting”, the
break timer is not displayed. (See page  62.)
▼On-screen display
SHUTTER 
buttons
Mouse/adjustment 
button 
(
'/"/\/|) 
UNDO button
BREAK TIMER 
b utton 
						

							42
Menu Items
The following shows the items that can be set in the projector.
“Picture” menu
COMPUTER1/2, DVI, HDMI
+30 -30
+30 -30
+30 -30
+30 -30
+30 -30
Tint Color Bright
+30 -30Contrast
Red
Green Picture
4500K
10500K
Main Menu Sub Menu
CLR Temp
Page 49
Page 49
Page 49
Page 50
Picture ModeStandard
Presentation
Movie
Custom
*1
*1
*1
*1
*1
*1 *2
+30 -30Blue
Signal TypeAuto
RGB
ComponentCOMPUTER1/2D.PC RGB
D.PC Comp.
D.Video RGB
D.Video Comp.DVID.Video Auto
D.Video RGB
D.Video Comp.
D.PC. RGB
D.PC. Comp.HDMI
Reset
Progressive
Page 50
Page 49
Page 51
*3
*5*1 *42D Progressive
3D Progressive
Film Mode
Page 50
DNROff
Level 1
Level 2
Level 3
Page 52
C.M.S. AdjustmentStandard
Custom 1
Custom 2
Custom 3
sRGB
+30 -30Sharp
Dynamic RangeAuto
Standard
Enhanced
Page 51
Auto
ITU601
ITU709Color Space
Page 51
*6
*6
*1 “Color”, “Tint”, “Red”, “Green”, “Blue” and “CLR Temp” cannot be adjusted when “C. M. S. Adjustment” is set to
“sRGB”.
*2 “Sharp” can be adjusted only when 480
I, 480P, 540P, 576I, 576P, 720P, 1035I, 1080I or 1080P signal is input.
*3 “Progressive” can be adjusted only when 480
I or 576I signal is input.
*4 “sRGB” can be selected under the conditions below.
• When “Signal Type” is set to “RGB”, “D. PC. RGB” or “D. Video RGB”.
• When “Signal Type” is set to “Auto” or “D. Video Auto” and the input signal is distinguished as “RGB”.
*5 “DNR” can be adjusted only when 480
I, 480P, 576I or 576P signal is input.
*6 “Dynamic Range” and “Color Space” can be worked only when DVI or HDMI signal is input. 
						

							43 VIDEO/S-VIDEO
+30 -30
+30 -30
+30 -30
+30 -30
+30 -30
Tint Color Bright
+30 -30Contrast
Red
Green Picture
4500K
10500K
Main Menu Sub Menu
CLR Temp
Page 49
Page 49
Page 49
Page 50
Picture ModeStandard
Presentation
Movie
Custom
+30 -30Blue
Reset
Progressive
Page 50
Page 49
2D Progressive
3D Progressive
Film Mode
Page 50
DNROff
Level 1
Level 2
Level 3
Page 52
C.M.S. AdjustmentStandard
Custom 1
Custom 2
Custom 3
+30 -30Sharp
“Picture” menu 
						

							44
“Fine Sync” menu
*6 The “Fine Sync” menu is displayed only while the input mode is COMPUTER1/2, DVI or HDMI.
*7 “Clock”, “Phase”, “H-Pos”, “V-Pos”, “Reset”, “Save Setting”, “Select Setting” and “Resolution” can be adjusted only
while the input mode is COMPUTER1 or 2.
Fine Sync
+30 -30
+60 -60
+150 -150
+150 -150Clock
Phase
H-Pos
V-Pos
Reset
Auto Sync Disp
Save Setting
Main Menu
Auto Sync
Page 53 Page 53
Page 53
Page 54
*6
*7
Page 54
Off
Normal
High Speed
Background
Adjusting Disp.
Select Setting
Page 53
Resolution
Page 53
Signal Info
Page 54
Sub Menu
“C.M.S.” menu
View Settings
Reset (This Color) C.M.S.
Main Menu
Page 52Page 52
Page 52
Page 52
C.M.S. AdjustmentStandard
Custom 1
Custom 2
Custom 3
sRGB
Page 52
Reset (All Colors)
[R] Red
[Y] Yellow
[G] Green
[C] Cyan
[B] Blue
[M] MagentaTarget
Page 52
+30 -30
+30 -30
+30 -30Lightness
Chroma
Hue
Page 52
Page 52
Page 52
Sub Menu
COMPUTER1/2, DVI, HDMI
Menu Items 
						

							45
On
Off
On
Off
Pict in Pict
Options 1
Main Menu Sub Menu
OSD Display
Auto
PAL (50/60Hz)
SECAM
NTSC4.43
NTSC3.58
PAL-M
PAL-N Video System
Background
Image CaptureSave Image
Delete
Logo
Custom
Blue
None
Normal
Full
Dot By Dot
Area Zoom
V-Stretch
Stretch
Smart Stretch
Eco Mode 
Auto Search 
System LockAuto Power Off
 
Page 56
Page 57 Page 56
Resize
Page 56
Page 57
Page 57
Page 58
Page 58
Page 58
Page 58
Page 59
*10 *8
*9
*8
Normal
Level A
Level B
Startup ImageLogo
Custom
None
On
Off
Page 58
On
Off
Page 57
Digi. Shift
+40 -40
“Audio” menu
+30 -30
+30 -30
+30 -30
Speaker Bass Treble
+30 -30Balance
Reset
Audio Out Audio
Main Menu
Page 55
Page 55
Page 55
Page 55
FAO
VAO
On
Off
Sub Menu
*8 Item when inputting RGB signal through COMPUTER1/2, DVI or HDMI.
*9 Selectable items in “Resize” mode may differ depending on the signal.
*10 Item when selecting VIDEO or S-VIDEO.
“Options 1” menu 
						

							46
“Language” menu
“Status” menu
Main MenuSub Menu
Language
Page 65
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
polski
Türkçe
Status
Main menu
Page 65
LAN/RS232C
Monitor Out
RS-232C Options 2
Enable
Disable
COMPUTER1 [ON/OFF]
COMPUTER2 [ON/OFF]
DVI [ON/OFF]
HDMI [ON/OFF]
VIDEO [ON/OFF]
S-VIDEO [ON/OFF]
9600 bps
38400 bps
115200 bps
Enable
Disable
Main Menu Sub Menu
Set Inputs
Page 61Page 61
Page 63
Page 64
Service Mode
Page 65
Page 64
Page 64
Network
DHCP Client [ON/OFF]
TCP/IPPage 64
All Reset
PasswordOld Password
New Password
Reconfirm
Both Lamps
Lamp 1 Only
Lamp 2 Only
Equal UseLamp Mode
Page 62
Front
Ceiling + Front
Rear
Ceiling + RearPRJ Mode
Page 62
Page 62
Stack SettingNormal
Master
Slave
Pair Stack
Page 63
Page 63
Keylock LevelNormal
Level A
Level B
Page 63
Fan ModeNormal
High
On
Off
Page 63
Auto Restart
Page 65
IP Address
Subnet Mask
Gateway*11
Lens Type
Page 62
Type 1
Type 2
Type 3
Type 4
Type 5
Type 6
Type 7
Page 65
*11 Adjustable only when “DHCP Client” is set to “OFF”
“Options 2” menu
Menu Items 
						

							47
Menu items
Using the Menu Screen
Menu Selections
•This operation can also be performed by using the buttons on the projector.
Example: “Picture” screen menu for
COMPUTER1 (RGB) mode1Press MENU .
•The “Picture” menu screen for the se-
lected input mode is displayed.
2Press 
\
\ \
\
\  or 
|
| |
|
|  to display the other
menu items.
• Menu items are as shown below.
Note
•The “Fine Sync” menu is not available
for VIDEO or S-VIDEO.
Menu item
ENTER button MENU button
UNDO button Mouse/adjustment
button ( '/" /\ /| )
Adjustment 
buttons ( '/" /\ /| )
MENU button
UNDO button ENTER button 
						

							48
Single
adjustment
item
Example 1: Adjusting “Bright”
3Press 
' '' '
' or 
" "" "
" to select the item
you want to adjust.
•Pressing  displays the items on the
lower part of the “Picture” menu.
To adjust the projected
image while viewing it
Press ENTER.
•The selected single adjustment item
(e.g. “Bright”) appears instead of the
menu.
•When pressing 
' '' '
' or 
" "" "
", the following
item (“Color” after “Bright”) will be dis-
played.
Note
•Press UNDO to return to the previ-
ous screen.
4Press 
\ \\ \
\ or 
| || |
| to adjust the item
selected.
•The adjustment is stored.
5Press MENU.
•The menu screen will disappear.
Example 2: Selecting “Signal Type”
3Press 
' '' '
' or 
" "" "
" to select the item
you want to set and then press
ENTER.
4Press 
' '' '
' or 
" "" "
" to select the de-
sired item and then press EN-
TER.
5Press MENU.
•The menu screen will disappear.
Using the Menu Screen
There are two methods of adjustment de-
pending on the menu item. Use the appli-
cable method from Example 1 or 2 shown
below.