Eiki Projector Eip Wss3100 User Manual

40English ...
Projector Status and Control Page
Projector Status:  There are 4 status: Standby, Warning up, Lamp On, Power  `Saving and Cooling. Click the Refresh button to refresh the status and control settings. 
Auto Power Off:  Auto Power Off can be set to Off(0) or 1~120 minutes. See “Auto  `Power Off (min)” function.
Alert Status:  There are three error status: Lamp warning, Low lamp life, and  `Temperature warning. Your projector might lock up in protection mode if any of the alerts is activated....

41... English
E-mail Setting Page
E-mail Alert: You can set whether to be notified by email (Enable) or not (Disable). `
To/Cc/From:  You can enter email address of sender (From) and recipients (To/ `Cc) to receive notification when an abnormality or warning occurs.
SMTP setting:   Out going SMTP server, User name, and Password should be  `provided by your network administrator or MIS.
Alert Condition:   You can select the abnormalities or warnings to be notified by  `email. When any of the alert...

42English ...
Login Page
Administrator Password:  Enter the Administrator Password and click Login  `
button.
Welcome to Web Management.
Projector Name:IP Address:
Administrator Password:LoginProjector InformationD21211192.168.0.100
Web Management
Crestron
For more information, please visit http://www.crestron.com & www.crestron.com/ `
getroomview/ 

43... English
Troubleshooting
Appendices
If you experience a problem with your projector, please refer to the fol-
lowing information. If a problem persists, please contact your authorized 
dealer.
Image Problems
  No image appears on-screen
Ensure all the cables and power connections are correctly and securely  `
connected as described in the “Installation” section.
Ensure the pins of connectors are not crooked or broken. `
Check if the projection lamp has been securely installed. `
Ensure that the...

44English ...
If the projector is still not projecting the whole image, you will also  -
need to change the monitor display you are using. Refer to the 
following steps.
Select the “Change” under the “Monitor” tab.1. 
Click on “Show all devices”. Next, select “Standard monitor types” 2. 
under the SP box; choose the resolution mode you need under 
the “Models” box.
Verify that the resolution setting of the monitor display is lower 3. 
than or equal to 1080p.
If you are using a Notebook: y
First, follow...

45... English
  Image has vertical flickering bar
Use “Clock” to make an adjustment. Refer to the “Screen” section for more  `
information.
Check and reconfigure the display mode of your graphic card to make it  `
compatible with the product.
  Image is out of focus
Adjust the “Focus Ring” on the projector lens. `
Make sure the projection screen is within the required distance. Refer t\
o  `
Page 16.
  The image is stretched when displaying 16:9 DVD title
When you play anamorphic DVD or 16:9 DVD, the...

46English ...
Projector Problems
 
 The projector stops responding to all controls
If possible, turn off the projector, then unplug the power cord and wait at  `
least 20 seconds before reconnecting power.
 
 Lamp burns out or makes a popping sound
When the lamp reaches its end of life, it will burn out and may make a loud  `
popping sound. If this happens, the projector will not turn on until the lamp 
module has been replaced. To replace the lamp, follow the procedures in 
the “Replacing the Lamp”...

47... English
 
 Two images, Side-by-Side(Half) format
Select  `“3D” --> “3D Format” from OSD and choose “Side-by-Side(Half)” for 
input signal is HDMI 1.4a 3D. 3D Format is only supported on 3D Timing o\
n 
page 51.
 
 Image does not display in 3D
Check if the battery of 3D glasses is drained. `
Check if the 3D glasses is turned on. `
Select  `“3D” --> “3D Format” from OSD and choose “Side-by-Side(Half)” for 
input signal is HDMI 1.4a 3D. 3D Format is only supported on 3D Timing o\
n 
page 51.
On Screen...

48English ...
Compatibility Modes
VGA Analog y
PC signal -
ModesResolutionV. Frequency [Hz]H. Frequency [Hz]
VGA
640x4806031.5 
640x4806735.0 
640x4807237.9 
640x4807537.5 
640x4808543.3 
640x48012061.9 
IBM720x4007031.5 
SVGA
800x6005635.1 
800x6006037.9 
800x6007248.1 
800x6007546.9 
800x6008553.7 
800x60012077.4 
Apple, MAC II832x6247549.1 
XGA
1024x7686048.4 
1024x7687056.5 
1024x7687560.0 
1024x7688568.7 
1024x76812099.0 
Apple, MAC II1152x8707568.7 
SXGA
1280x10246064.0 
1280x10247277.0...

49... English
Extended wide timing -
ModesResolutionV. Frequency [Hz]H. Frequency [Hz]
WXGA
1280x7206044.8 
1280x8006049.6 
1366x7686047.7 
1440x9006059.9 
WSXGA+1680x10506065.3 
Component signal -
ModesResolutionV. Frequency [Hz]H. Frequency [Hz]
480i720x480(1440x480)59.94(29.97)15.7 
576i720x576(1440x576)50(25)15.6 
480p720x48059.9431.5 
576p720x5765031.3 
720p1280x7206045.0 
720p1280x7205037.5 
1080i1920x108060(30)33.8 
1080i1920x108050(25)28.1 
1080p1920x108023.98/2427.0
1080p1920x10806067.5...