Eiki Projector Eip Sxg20 User Manual

MULTIMEDIA PROJECTOR
MODEL EIP-SXG20
 
OWNER’S MANUAL
✽ Projection lens is optional. 

2
This  Multimedia  Projector  is  designed  with  most  advanced  technology  for  portability,  durability,  and  ease  of  use. This 
projector utilizes built-in multimedia features.
 ◆ Functionally Rich
 ◆ Simple Computer System Setting
Th e   p r o j e c t o r   h a s   t h e   M u l t i - s c a n   s ys t e m   t o 
conform  to  almost  all  computer  output  signals 
quickly (p.35). Supported resolution up to WUXGA. ◆
 Multilanguage Menu Display
Operation  menu  is  available  in  12  languages;...

3
Trademarks
Each  name  of  corporations  or  products  in  this  book  is  either  a  registered  trademark  or  a  trademark  of  its  respective 
corporation.
DLP is a registered trademark of Texas Instruments. BrilliantColor and DynamicBlack are trademarks of Texas Instruments.
Table of Contents
Features and Design . . . . . . . . . . . . . . . .2
Table of Contents   . . . . . . . . . . . . . . . . . . 3
To The Owner   . . . . . . . . . . . . . . . . . . . . . 4
Safety Instructions  . . . . . . . ....

4
CAUTION: TO   R E D U C E   T H E   R I S K   O F   E L E C T R I C 
S H O C K ,  D O   N OT   R E M OV E   C OV E R   ( O R 
BACK)  .  NO  USER-SERVICEABLE  PARTS 
INSIDE  EXCEPT  LAMP  REPLACEMENT  .  
REFER  SERVICING TO  QUALIFIED  SERVICE 
PERSONNEL .
T H I S   SY M B O L   I N D I C AT E S   T H AT   DA N G E ROU S 
VOLTAGE  CONSTITUTING  A  RISK  OF  ELECTRIC 
SHOCK IS PRESENT WITHIN THIS UNIT.
T H I S   SY M B O L   I N D I C AT E S   T H AT   T H E R E   A R E 
I M P O RTA N T   O P E R AT I N...

5
All  the  safet y  and  operating  instructions  should  be  read 
before the product is operated.
Read  all  of  the  instructions  given  here  and  retain  them  for 
later  use.    Unplug  this  projector  from  AC  power  supply 
before cleaning.  Do not use liquid or aerosol cleaners. Use a 
damp cloth for cleaning.
Follow all warnings and instructions marked on the projector.
 
For  added  protection  to  the  projector  during  a  lightning 
storm,  or  when  it  is  left  unattended  and...

6
Openings in the cabinet are provided for ventilation. To 
ensure reliable operation of the product and to protect 
it from overheating, these openings must not be 
blocked or covered. 
 CAUTION
Hot air is exhausted from the exhaust vent. When 
using or installing the projector, the following 
precautions should be taken. 
– Do not put any flammable object or spray can near 
the projector, hot air is exhausted from the air vents.
–  Keep the exhaust vent at least 3’ (1 m) away from 
any objects.
–  Do...

7
Safety Instructions
Use the projector properly in specified positions. Improper positioning \
may reduce the lamp life and result in 
severe accident or fire hazard.
This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the 
horizontal plane.
Installing the Projector in Proper Directions
Avoid positioning the projector as described below when installing.
Positioning Precautions
Do not roll the projector more 
than 20 degrees from side to 
side....

8
Moving the Projector
  CAUTION IN CARRyING OR 
TRANSPORTING THE PROJECTOR
–  Do not drop or bump the projector, other wise 
damages or malfunctions may result.
–  When carrying the projector, use a suitable carrying 
case.
–  Do not transport the projector by courier or any 
other transport service in an unsuitable transport 
case. This may cause damage to the projector. For 
information about transporting the projector by 
courier or any other transport service, consult your 
dealer.
–  Do not put the...

9
AC Power Cord for the United Kingdom:
 This  cord  is  already  fitted  with  a  moulded  plug  incorporating  a  fuse,  the  value  of  which  is  indicated  on  the  pin 
face  of  the  plug.  Should  the  fuse  need  to  be  replaced,  an  ASTA  approved  BS  1362  fuse  must  be  used  of  the 
same  rating,  marked  thus 
A S A.  If  the  fuse  cover  is  detachable,  never  use  the  plug  with  the  cover  omitted.  If  a 
replacement fuse cover is required, ensure it is of the same colour as...

10
u
e r t
Front
o
q wyi
Back
q	 Projection Lens (Option)
w	 Indicators
e  Infrared Remote Receiver (Front)
r	 Handle
t  Adjustable Feet
y	Side Control
u 
Terminals and Connectors
i  Main On/Off Switch
o  Power Cord Connector
!0  Lamp Cover
!2
 CAUTION
Hot air is exhausted from the exhaust 
vent. Do not put heat-sensitive objects 
near this side.
Part Names and Functions
!0
✽Kensington Security Slot This slot is for a Kensington lock used to 
deter theft of the projector.
* Kensington is a registered...