Eiki Lc-Xsp2600 Multimedia Projector Owners Manual

							29
MENU
Advanced Menu
LOGO SETTING
This function allows you 
to customize the start-up 
logo. 
In order to access 
this page PIN code is 
required.
 
Item Selection Description
LOGO MODEDEFAULT
USER
OFF Select	Mode(	►	cursor	button)
The factory logo.
The image you captured.
The blank image. You can select color with background 
function.
LOGO
CAPTURE EXECUTE
Start to capture the image.(PC mode only)
BACKGROUND BLACK
BLUE
WHITESet background color.
LOGO SIZE ORIGINAL
FULL Display the captured image in original size and put in the 
center of the screen.
Expand the image to full screen. 
						

							30
MENU
NOTE	 ►You	can	capture	an	image	only	in	computer	mode.
	 ►The	area	that	can	be	captured	is	512	x	384	dots.
Advanced Menu
Logo Capture
How to use this function?
		 Select Logo Capture item in the logo 
setting	menu,	then	press	►	button.
		 Red frame will appear to select captures 
area.
		 Use 4 direction buttons to adjust the 
position of the frame.
		 Press "MENU" to start capturing and 
display a dialog. 
Image

Logo Capture In Progress. 
						

							31
MENU
Presentation Menu
Step:
1.			Use	the	▲	/▼buttons	
to select an item.
2.			 Use 	the 	◄ 	/ 	► 	buttons	
to select an item or 
adjust the value.
Item Selection Description
AUTO CEILINGOFF / ONAutomatically invert the image when the projector is turned 
upside down, i.e. when the projector is mounted on the 
ceiling.
FRONT EXECUTENormal projection mode.
CEILING EXECUTEMirror the image vertically, only for the projector mounted 
upside down.
REAR EXECUTEMirror the image horizontally, only for projecting onto rear 
projection screen.
CEILING AND 
REAR EXECUTEMirror the image horizontally and vertically. Projecting onto 
a rear projection screen while projector is upside down.
LAMP MODE NORMAL /
ECOSwitch lamp mode between normal or ECO mode.
LAMP Show lamp use time.
RESET LAMP 
TIMER EXECUTEAfter changing a new lamp, execute this function to reset 
the lamp timer. 
						

							32
MENU
NOTE
►		The	replacement	warning	message	is	set	to	appear	after	about	4000	hours	of	lamp	use	in	order	
to maintain the initial brightness. When replacement message appears, replace the lamp with a 
new one as soon as possible, even if the lamp is still workable.
Presentation Menu
Reset Lamp Timer
The lamp timer is the time counted after the last resetting. The usage time of the lamp is 
shown in the PRESENTATION Menu. Select the “RESET LAMP TIMER” if the lamp 
timer is required to reset. The dialog of “Reset Lamp Timer ?” is shown on the screen 
as below. To reset the lamp time, select “yes” of Lamp Reset and push the but\
ton on the 
top cabinet. 
						

							33
MENU
Security Menu
Step:
1.			Use	the	▲	/▼buttons	to	
select an item.
2.			 Use	the	◄	/	►	buttons	to	
select an item or adjust the 
value.
Item Selection Description
PIN LOCK 
PROTECTIONOFF
ON 1
ON 2OFF:  
   Turn off PIN lock protection.
ON 1:   
After plugging in AC power, you need to key in PIN 
code	at	the	first	time	of	use.	If	the	 AC	power	stays	
unplugged, you do not need to key in PIN code next 
time when you use the projector.
ON 2:    You need to key in PIN code every time when you 
turn on the projector.
 CAUTION:
Once the PIN code had been set, the projector cannot be 
used unless you enter the correct PIN code.
 
MODIFY PIN EXECUTE1. Press " MENU " on the projector or remote control.
2.		
Use	the	►	button	to	select	the	MODIFY 	PIN	item	in	the	
SECURITY category.
3.		 Press 	the 	► 	button 	to 	change 	PIN 	LOCK 	PROTECTION 	
mode.
4. Please enter the original PIN code.
    (a)   If the PIN is correct, system will allow you to change 
a new PIN code.
    (b)   If the PIN is incorrect, a " Code Error " message will appear.
5.	Please 	enter 	a 	new 	PIN 	code. 	And 	then 	enter 	again 	to 	confirm.
NOTE:
(1)    To change the PIN lock protection state, you must 
enter	the	PIN	code	first.
(2)	Please	enter:	0000	for	first-time	use.
(3)    To avoid unnecessary trouble, if you activate the [PIN 
Lock Protection], it is highly recommended that you 
write down the PIN code and store it in a safe place. 
						

							34
MENU
Security Menu
Step:
1.			Use	the	▲	/▼buttons	to	
select an item.
2.			 Use	the	◄	/	►	buttons	to	
select an item or adjust the 
value.
Item Selection Description
FILTER TIMER Show	the	filter	use	time.
RESET FILTER
TIMER EXECUTE
Reset	the	filter	timer	after	cleaning	/	changing	filter.
FILTER COUNTER 500 hours
800 hours
1000 hoursSelect (500 / 800 / 1000 hours) depending on the 
environment.(default : 500 hours). Please see next page.
MAC ADDR. For LAN control module, "MAC ADDR." will be shown in 
"SECURITY" Menu. 
MAC address stands for unique Media Access Control 
address of LAN control module and displays with six 
groups of two hexadecimal digits.
CLOSED CAPTION OFF(Default)
C.C1
C.C2
C.C3
C.C4
T1
T2
T3
T4The Closed Caption function intimates the sound effects, 
dialogue, and narration in the content of the television 
program or video source.
Caption (C.C1~C.C4) : Display closed caption Text 
(T1~T4) : Display text data, which is for additional 
information such as news reports or a TV program guide.
NOTE : 
  This function is available only in Video / S-Video 
source.
LAN MODULE  OFF
ONSelect ON/OFF to turn on/off LAN control feature.
LAN SETTING EXECUTEEnter LAN SETTING to set up projector network 
configuration. 
						

							35
MENU
Security Menu
Step:
1.			Use	the	▲	/▼buttons	to	
select an item.
2.			 Use	the	◄	/	►	buttons	to	
select an item or adjust the 
value.
Item Selection Description
PROJECTOR 
NAMEDefault is 
ProjectorProjector network setting display which shows bits that can 
be recognized by ASCII.
DHCP OFF / ONWhen setting ON, projector's IP address will be assigned by 
DHCP server automatically. When setting OFF, you can use 
remote control to do setting manually.
IP Key in IP address manually. Press "ENTER" to do digit 
setting. When appears, press 
▲	/▼	to	adjust	value.	
When	
finishing	value	adjustment,	press	MENU	to	exit.
MASK Enter MASK address manually. Press "ENTER" to do digit 
setting. When appears, press ▲	/▼	to	adjust	value.	
When	
finishing	value	adjustment,	press	MENU	to	exit.
GATEWAY Enter GATEWAY address manually. Press "ENTER" to do 
digit setting. When appears, press ▲	/▼	to	adjust	value.	
When	finishing	value	adjustment,	press	MENU	to	exit. 
						

							36
MENU
NOTE
►	Please	reset	the	Filter	time	only	when	you	replace	the	filter.
Auto Filter Alert
Auto	Filter	Alert	in	SECURITY 	category	shows	the	air	filter	use	time	and	alerts	user	to	change	
filter.	 When	the 	operating	time 	reaches	the	set	time,	a 	warning	message 	will	appear	on	the	screen	to	
remind	user	of	filter	cleaning	/replacing.
Filter Replace...
Filter has been used for more than 500 hours. 
						

							37
MENU
PIN Key In Operation
When the projector is turned on and the 
PIN LOCK PROTECTION is set to [ON], 
the image will show as on the right side.
1.  Press the MENU button on the projector 
or remote control. Enter PIN code by 
keypad or remote control.
2.    How to enter a PIN code? 
You can use control panel or remote 
control.
(1)	Press	◄	button:	Select	the	[	1	]
(2)	Press	▲	button:	Select	the	[	2	]
(3)	Press	►	button:	Select	the	[	3	]
(4)	Press	▼	button:	Select	the	[	Enter	]	to	move	to	next	row.(4~6,7~9,	
~OK)
(5)   Press 
 (backspace) item:  
In case you enter a wrong digit, select  to delete the wrong digit you entered.
(6)   Press 
 item:  
Once all four digits of the PIN are entered, select 	to	confirm.
NOTE
(1)	Please	enter:	0000	for	first-time	use.
(2)   If the PIN is incorrect, a "Enter new code" message will be shown. Pleas\
e try again. If the PIN 
code input is incorrect for three times, a warning message will show up \
and the  projector will 
shut itself down in 30 seconds.
(3)   If you have no idea about the PIN, please contact your dealer for help.
Refer to photo below to enter a sequence of PIN code by touch keypad  or remote control buttons.
TOUCH KEYPAD
REMOTE CONTROLThe touch keypad and remote control 
buttons to enter a sequence of PIN code is 
like the photo below. 
						

							Network Control Software Application
38
Network Control Software Application
LAN
Procedure to utilize this function
Network Control is provided in visual interface, it can help user to mon\
itor and manage the 
projector(s) status in the local area network.
1.   Register the projector(s) which needs to be controlled.  
" Auto search " can help you to seek the projector(s) source easily. 
After registering in the work group, you can start to control the projec\
tor.
2.   Group the projector(s) into different sections.  
You can monitor the status easily by the sort of group name function in t\
he network.
3.    	 Monitor the status for each projector. 
a.You can manage and change the monitoring content by System Parameter Sett\
ing.  
b.	 The	Lamp	timer,	filter	working	time	or	system	warning	feedback	etc.	can	be	known  
by checking the status for projector(s).
4.    Control the booked projector(s).  
    The status can be refreshed and acquired by monitoring functions; you can also operate the function 
easily by   Network Control.
NOTE:
To monitor and control the projector(including stand-by mode), the foll\
owing conditions need to be 
ready:
(1) Projector should already be powered on.
(2) Projector is connected to network.
(3)   LED light of the projector network port shows normal. (Green light on, \
Orange twinkle)
*		 Stand-by	mode	indictor:	Green	LED	(Power)	on	the	projector’s	touch	keypad		flashes.