Eiki Lc-Xsp2600 Multimedia Projector Owners Manual

							19
Remote Control
Remote Control Batteries 
Installation
1. Remove the battery cover. 
2. Load the batteries.
   Make sure the poles are correctly oriented.
3. Close the battery cover.
 Caution
►Avoid	excessive	heat	and	humidity.
►Do	not	drop	the	remote	control.
►	 If	the	remote	control	will	not	be	used	for	an	extended	period,	remove	the	batteries.
►	 Do	not	expose	the	remote	control	to	water	or	moisture.	 This	could	result	in	malfunction.
►	 Replace	the	battery	when	remote	control	operation	becomes	sluggish	or	unresponsive.
►	 Do	not	place	the	remote	control	close	to	the	exhaust	ventilation	opening	of	the	projector,	
because the exhaust air is hot.
►	 Do	not	use	batteries	of	different	types	at	the	same	time.
►	 Do	not	mix	a	new	battery	with	used	one.	Make	sure	the	plus	and	negative	terminals	are	
correctly aligned when loading batteries.
►	 Dispose	of	batteries	in	accordance	with	environmental	laws	of	your	area.
►	 Do	not	disassemble	the	remote	control.	If	the	remote	control	needs	service,	please	contact	
your dealer.
►	 The	batteries	(battery	pack	or	batteries	installed)	shall	not	be	exposed	to	excessive	heat	
such	as	sunshine,	fire	or	the	like. 
						

							Remote Control (Optional)
20
Remote Control
POWER
Power on / operation mode, Standby mode, Cool 
down mode.
INPUT
Select input source :
MENU
Display or hide the On-Screen Display main menu 
page.
 
Press  or  to select On-Screen Display 
menu item.
 
Press  or  to select and adjust the 
function of On-Screen Display menu item or value.
LASER
Aim the remote control at the screen, press and 
hold button to activate the laser pointer.
MUTE
Mute audio.
AUTO
Refresh the current image.
BLANK
Hide the current image, become black color on the 
screen.
Press / / /  button to move 
arrow direction of window.
MOUSE-L / MOUSE-R
The function is like mouse of desktop/ notebook.
Remote control’s mouse functions will only work 
if the USB cable is connected (see page 17 for 
instructions)
RGB 1 RGB 2
Video
S-Video DVI-I
Y,Pb,Pr 
						

							21
Menu Operation
How To Operate On-Screen Display
1.  Press "Menu" button. Following menu will appear.
2.   Press up / down / left / right button on touch keypad or remote control \
to 
select item or adjust value.
Up / Down / Right / Left button
Menu button
007 
						

							MENU (PC Mode)
22
MENU (PC Mode)
Picture Menu
Step:
1.			Use	the	▲	/▼	buttons	to	
select an item.
2.			 Use	the	◄	/	►	cursor	
buttons to select an item or 
adjust the value.
Item Selection Description
BRIGHTNESS000/100 Adjust the image brightness level.
CONTRAST 000/100 Adjust the image contrast level.
SHARPNESS 000/015 Adjust the image sharpness.
DISPLAY MODE NATURAL
Natural color.
CINEMA Enhance contrast ratio when displaying DVD contents.
DAYLIGHT Suitable when ambient light is strong.
GREEN BOARD
WHITE BOARD
BLACK BOARD Adjust the color settings to make the projected image on 
a (green, white, black) board more visible.
USER User Red     000/100
User Green  000/100
User Blue    000/100
007
*Only USER mode in Display mode USER RED/GREEN/BLUE can be adjusted.
*The setting data in this Picture Menu is not shown correctly if no sign\
al is fed and projected. 
						

							23
MENU (PC Mode)
Audio Menu
Step:
1.			Use	the	▲	/▼	buttons	
to select an item.
2.			 Use 	the 	◄ 	/ 	► 	buttons	
to select an item or 
adjust the value.
Item Selection Description
VOLUME00/40Adjust the volume.
MUTE OFF/ON Mute the volume OFF / ON. 
						

							24
MENU (PC Mode)
Setting Menu
Step:
1.			Use	the	▲	/▼buttons	
to select an item.
2.			 Use	the	◄	/	►	buttons	
to select an item or 
adjust the value.
Item Selection Description
H POSITION000/100Move the image position horizontally.
This function can be used under computer signal input only.
V POSITION 000/100Move the image position vertically.
This function can be used under computer signal input only.
PHASE 000/100 Adjust the image sharpness.
FREQUENCY 000/200Set the horizontal scanning frequency.
AUTO
KEYSTONE OFF/ON
Correct keystone distortion in image automatically.
KEYSTONE V -70/+70Correct vertical keystone distortion in image manually.
AUTO SYNC EXECUTESet all of the above setting automatically.
AUTO SEARCH OFF/ONSearch signal source manually or automatically.
KEYPAD  BEEP OFF/ON
Turn the Beep of Keypad OFF / ON.
*  H POSITION, V POSITION, PHASE, FREQUENCY and AUTO SYNC does not work for Digital 
RGB signal.
* The setting data in this Setting Menu is not shown correctly if no signa\
l is fed and projected. 
						

							MENU (Video Mode)
25
MENU (Video Mode)
Picture Menu
Step:
1.			Use	the	▲	/▼	buttons	
to select an item.
2.			 Use	the	◄	/	►	cursor	
buttons to select an 
item or adjust the 
value.
Item Selection Description
BRIGHTNESS000/100 Adjust the image brightness level.
CONTRAST 000/100 Adjust the image contrast level.
SHARPNESS 000/015 Adjust the image sharpness.
COLOR 000/100 Adjust the strength of whole color.
This function can be used under video signal, S-Video 
signal, or component video signal input only. 
TINT 000/100 Adjust the image tint.
This function can be used under video signal, S-Video 
signal, or component video signal.
DISPLAY MODE NATURAL
Natural color.
CINEMA Enhance contrast ratio when displaying DVD contents.
DAYLIGHT Suitable when ambient light is strong.
GREEN BOARD
WHITE BOARD
BLACK BOARD Adjust the color settings to make the projected image on 
a (green, white, black) board more visible.
USER User Red     000/100
User Green  000/100
User Blue    000/100
007
*Only USER mode in Display mode USER RED/GREEN/BLUE can be adjusted.
*The setting data in this Picture Menu is not shown correctly if no sign\
al is fed and projected. 
						

							26
MENU (Video Mode)
Audio Menu
Step:
1.			Use	the	▲	/▼	buttons	to	
select an item.
2.			 Use	the	◄	/	►	buttons	
to select an item or adjust 
the value.
Item Selection Description
VOLUME00/40Adjust the volume.
MUTE OFF/ON Mute the volume OFF / ON. 
						

							27
MENU (Video Mode)
Setting Menu
Step:
1.			Use	the	▲	/▼buttons	to	
select an item.
2.			 Use	the	◄	/	►	buttons	
to select an item or adjust 
the value.
Item Selection Description
AUTO KEYSTONEOFF/ONAutomatically Correct keystone distortion in image.
V KEYSTONE  -70/+70Correct vertical keystone distortion in image manually.
AUTO SEARCH OFF/ONSearch signal source manually or automatically.
KEYPAD  BEEP OFF/ON
Turn the Beep of Keypad OFF / ON. 
						

							28
MENU
Advanced Menu
Step:
1.			Use 	the 	▲ 	/▼buttons	
to select an item.
2.			 Use	the	◄	/	►	
buttons to select an 
item or adjust the 
value.
Item Selection Description
ZOOM / PANEXECUTEExecute digital zoom and pan function.
FREEZE OFF/ONFreeze the current image on the screen.
BLANK OFF/ON Hide the image. Display on the screen turns into black.
BLANK POWER OFF 15/30/60 
Minute
Set power off time after "Blank".
RESET EXECUTE Reset all menu function to their factory default values.
RESIZE 4:3, 16:9, 1:1
LANGUAGE ENGLISH
繁體中文English
Dutch
Français
Deutsch
Italiano
Español
ไทย
Polski
ﻉﺭﺏﻱﺓ Svenska
Português
Русский
У країнсь ка简体中文日本語한국어
SELECT SOURCE EXECUTESelect the input source from:
The search starts from the current port. When an input is 
found, the projector will stop searching and display the 
image.
LOGO SETTING EXECUTECustomize the start-up logo.
IMPORTANT:
To implement Logo setting function, please enter PIN code 
first.	 Without	inputting	the	PIN	code,	you	cannot	modify	
Logo setting function.
Select the language of the menu and on screen display 
massage.
RGB 1 RGB 2
Video
S-Video DVI-I
Y,Pb,Pr