Eiki Lc-Xl200l Multimedia Projector Owners Manual

71

appears	on	the	screen
–  Filter is out of scroll. Replace the filter cartridge with a new one promptly.  (See pages 
64-65)
The	image	is	out	of	focus .
– Adjust the focus of the projector.
– Check Projection Lens to see if it needs cleaning.
 Note:   Moving	the	projector	from	a	cool	temperature	location	to	a	warm	temperature	
location	may	result	in	moisture	condensation	on	Projection	Lens.	In	such	
cases,	leave	the	projector	OFF 	and	wait	until	condensation	evaporates.
–    Projecting  from...

72

WARNING:	
High	voltages	are	used	to	operate	this	projector .	Do	not	attempt	to	open	the	cabinet .
If  problems  still  persist  after  following  all  operating  instructions,  contact  the  dealer  where  you  purchased  the  projector  or  the 
service center. Specify the model number and explain about the problem. We will advise you how to obtain service.
Appendix
The	power	is	turned	off	
automatically .
–  Power  management  function  runs  by  initial  setting.  Check  “Setting”  section  on...

7

InputRGB (PC analog)
Y, Pb/Cb,Pr/Cr
RGB (Scart)
RGB (PC digital)
RGB (AV HDCP)
Network
Video
RGB
Video
Y, Pb/Cb,Pr/Cr
S-video
Input 3
InputH-sync freq.V-sync freq.
Information
ScreenLanguageLamp status
Power management
Remote control
Note:
		The	Menu	display	varies	depending	on	the	input	signal.
Appendix
Volume
MuteOn/Off
Sound0–63
Built-in SP
PIN code lock
Key lock
SERIAL NO.Network will be displayed only when an optional Pj-to NetDirector is attached.
*
*
Input 1
Input 2
Lamp counterFilter...

74

Note:
	The	Menu	display	varies	depending	on	the	input	signal.
System	(2)Auto
PAL
SECAM
NTSC
NTSC 4.43
PAL-M
PAL-N
System	(3)Auto
1080i
1035i
720p
575p
480p
575i
480i
Image	selectStandard
Cinema
Image 1
Image 10
Appendix
ScreenNormal
True
Wide
Full
Rear
Keystone
CeilingResetStore
On/OffOn/Off
CustomH & VScale
Position
H / VOn/OffH / VCommonReset
Reset
Screen
Digital zoom +
Digital zoom -
Video	Input
Image	select
ScreenNormal
Wide
Rear
Keystone
CeilingResetStore
On/OffOn/Off
CustomH & VScale...

75

SettingLanguage
Fan control
Blue/User/Black
Yes/No
12 languages provided.
Menu position
Lamp control
Filter control
All/Front&Top/Top&Back/Front&Back/Front/Top/Back
Normal/Max
Power management
Background
RC sensor
Ready
Off
Shut down
1–30 Min
On/OffOn start
Pointer
On/Countdown Off/OffDisplay
Remote Control
Finger/Arrow/Dot
Appendix
Yes/NoFactory default
ShutterProtection
Management
Remote controlOn/Off
ProjectorOn/Off
5 - 180 Min.
Code 1~Code 8
On/Off
Computer	Input/Video	Input
Logo select
Off...

76

Check the indicators for the projector condition.  
Indicators
Projector	ConditionPOWER
green
LAMP
red
WARNINGTEMP.
red
WARNINGFILTER
orange
SHUTTER
blue
LAMPREPLACE
orange
The projector is off. (The AC power cord is unplugged.)
The projector is in stand-by mode. Press the ON/
STAND-BY button to turn on the projector.
The projector is operating normally.
(The shutter is open)
The projector is operating normally.
(The shutter is closed)
The projector is preparing for stand-by or the projection 
lamp...

77

The	projector	is	detecting	abnormal	condition .
Indicators
Projector	ConditionPOWER
green
LAMP
red
WARNINGTEMP.
red
WARNINGFILTER
orange
SHUTTER
blue
LAMPREPLACE
orange
The temperature inside the projector is elevated close to the 
abnormally high level.
The temperature inside the projector is abnormally high. The 
projector cannot be turned on. When the projector is cooled 
down enough and the temperature returns to normal, the 
POWER indicator lights green and the projector can be turned 
on. (The...

7

The	projector	is	detecting	abnormal	condition .
Indicators
Projector	ConditionPOWER
green
LAMP 
red
WARNINGTEMP.
red
WARNINGFILTER
orange
SHUTTER	blue LAMPREPLACE
orange
If the Filter counter reached a time set in the timer setting, a Filter \
replacement icon (Fig.2) appears on the screen and the WARNING 
FILTER indicator on the top panel lights up. Replace the filter as 
soon as possible. If the filter is out of scroll and the projector reach\
es 
a time set in the timer setting, Fig. 3...

79

Basically this projector can accept the signal from all computers with t\
he V- and H-Frequency mentioned below and less than 
180 MHz of Dot Clock.
Appendix
Compatible	Computer	Specifications
ON-SCREEN	DISPLA yRESOLUTIONH-Freq .	(kHz) V-Freq .(Hz)
VGA 1640x48031.470 59.880 
VGA 2720x40031.470 70.090 
VGA 3640x40031.470 70.090 
VGA 4640x48037.860 74.380 
VGA 5640x48037.860 72.810 
VGA 6640x48037.500 75.000 
VGA 7640x48043.269 85.000 
MAC LC13640x48034.970 66.600 
MAC 13640x48035.000 66.670...

0

When an input signal is digital from the DVI terminal, refer to the char\
t below.
Appendix
Note:
	 •	Depending	on	the	condition	of	signals	and	the	type	and	length	of	cables,	these	signals	may	not	be	properly	viewed.
	 •	Specifications	are	subject	to	change	without	notice.
This symbol on the nameplate 
means the product is Listed by 
Underwriters Laboratories Inc. It 
is designed and manufactured to 
meet rigid U.L. safety standards 
against risk of fire, casualty, and 
electrical hazards.
The...