Eiki Lc-Xgc500 Multimedia Projector Owners Manual

!1 Infrared Remote Receiver (Back)
!2  Lamp Cover
!3  Filter Cover
!4  Exhaust Vent
!5  Security Chain Hook
!6  Air Intake Vent
!7	 Hand Grip
10
Bottom Back
q	Lens Release Button
w	 Infrared Remote Receiver (Top&Front)
e  Terminals and Connectors
r	 Top Controls and Indicators
t  Lens Cap (for LC-XGC500)
y	 Speaker
u	 Projection Lens (for LC-XGC500)
i	 Adjustable Feet
o	 Power Cord Connector
!0  Optional Parts Attachment
!7
!6
 CAUTION
Hot air is exhausted from the exhaust vent.  
Do not put...

11
Side Terminal
qwer
t
i
u
y	AUDIO 2 JACK
  Connect the audio output (stereo) signal from a 
computer or video equipment connected to i to 
this jack (p.22).
t	AUDIO 1 JACK
  Connect the audio output (stereo) signal from a 
computer or video equipment connected to q or 
w to this jack (p.22).
u	AUDIO 3 JACKS (L(MONO)/R)
  Connect the audio output signal from video 
equipment connected to o or !2	to these jacks 
(p.22). For a mono audio signal (a single audio jack), 
connect it to the L (MONO) jack.
i	5...

12
!1	R/C JACK
  When using the wired remote control, connect the 
wired remote control to this jack with a remote 
control cable.
Side Terminal
!0!1!2!3
!3	CONTROL PORT CONNECTOR
  When controlling the projector from a computer, 
connect the computer to this connector with a 
control cable.
Part Names and Functions
!0	USB CONNECTOR (Series B)
  Use this connector when controlling a computer 
with the remote control of the projector. Connect 
the USB terminal of your computer to this 
connector with the...

13
q
w
e
t
u
i
o
q	WARNING TEMP  . indicator
–   Lights red light when the projector detects an abnormal 
condition or the filter cartridge is not installed.
–  Blinks red when the internal temperature of the 
projector exceeds the operating range (pp.66, 75).
r	 ON/STAND-B y button
Turn the projector on or off (pp.24–25).
t	INPUT button
Select an input source (pp.34–35).
u	POINT ed7 8 (VOLUME +/–) buttons
–  
Select an item or adjust the value in the On-Screen 
Menu (p.26).
– Pan the image in Digital...

14
o
t
y
q STAND-B y button
  Turn the projector off (p.25).
t ON button
  Turn the projector on (p.24).
y INPUT 1 – 3 buttons
  Select an input source (INPUT 1 – INPUT 3) (pp.34–
35).
u	AUTO PC button
  Automatically adjusts the computer image to its 
optimum setting (pp.30, 38).
i FREEZE button
  Freeze the picture on the screen (p.30).
o	POINT ed 7 8 ( VOLUME + / – ) buttons
  – Select an item or adjust the value in the On-
Screen Menu (p.26).
  – Pan the image in Digital zoom + mode (p.47).
  –...

15
Remote Control
!9
!5
!3
!4
!8
!6
!7
@0
!3 MENU button
  Open or close the On-Screen Menu (p.26).
!6	ZOOM ed buttons
  Zoom in and out the images (p.30).
!5	D .ZOOM button
  Select the Digital zoom +/- mode and resize the 
image (pp.30,47).
@0	FOCUS button
  Adjust the focus (pp.28,30).
!8	MUTE button
  Mute the sound (p.29).
!4	P-TIMER button
  Operate the P-timer function (p.31).@1	SHUTTER button
 
Close the built-in shutter for light blocking.(pp.28,56)
@2	 KEy STONE button
  Correct keystone...

16
To ensure safe operation, please observe the following precautions :
l Use two (2) AAA or LR03 type alkaline batteries.
l  Always replace batteries in sets.
l  Do not use a new battery with a used battery.
l  Avoid contact with water or liquid.
l  Do not expose the remote control to moisture or heat.
l  Do not drop the remote control.
l  If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.
l  Risk of an explosion if...

17
The eight different remote control codes (Code 1–Code 8) are assigned to this pro\
jector. Switching the remote 
control codes prevents interference from other remote controls when several projectors or video equipment 
next to each other are operated at the same time. Change the remote control code for the projector first before 
changing that for the remote control. See “Remote control” in the Setting Menu on page 53.
Press and hold the MENU and a number button (1–8) 
for more than five seconds to...

18
✔Notes:
	 •	The	brightness	in	the	room	has	a	great	influence	on	picture	quality.	It	is	recommended	to	limit	 ambient	lighting	in	order	to	obtain	the	best	image.
	 •	All	measurements	are	approximate	and	may	vary	from	the	actual	sizes.
For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the 
screen.
10.0m
6.7m
5.0m
3.3m
1.2m
100” 32.8 (10.0m)
22.0 (6.7m)
16.4 (5.0m)
10.8 (3.3m)
3.9 (1.2m) 150”200” 300”
230”
155
116”
78”
30”
Max .  Zoom
Min ....

19
When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the 
sales dealer for detailed information of the optional lens specifications. 
Fit the lens to the projector by aligning the red dot 
on the lens with the red dot of the projector. Remove the lens mount cover.
1
2
Attaching the lens to the projector
Slowly turn the lens clockwise until it clicks. Make 
sure that the lens is fully inserted to the projector.3
Red dots
CAUTION
Do not press the...