Eiki Lc-Xg400l Multimedia Projector Owners Manual

							
71

When an input signal is digital from the DVI terminal, refer to the chart below.
PC Adjust Menu cannot be selected when Input 1 [RGB (PC digital)] is selected in the Input Menu.
✔Notes:
	 •	When	the	input	signal	is	D-SXGA	1	and	D-SXGA	+1	images	may	not	be	displayed	properly	depending	 on	computers
	 •	Specifications	are	subject	to	change	without	notice..
Appendix
ON-SCREEN 
DISPLA yRESOLUTION H-Freq .(kHz)V-Freq .(Hz)
D-VGA640x48031.470 59.940 
D-480p720x48031.470 59.880 
D-575p768x57531.250 50.000 
D-SVGA800x60037.879 60.320 
D-XGA1024x76843.363 60.000 
D-WXGA 11366x76848.360 60.000 
D-WXGA 21360x76847.700 60.000 
D-WXGA 31376x76848.360 60.000 
D-WXGA 41360x76856.160 72.000 
D-WXGA 51366x76846.500 50.000 
ON-SCREEN 
DISPLA yRESOLUTION H-Freq .(kHz)V-Freq .(Hz)
D-WXGA 61280x76847.776 59.870 
D-WXGA 71280x76860.289 74.893 
D-SXGA 11280x102463.980 60.020 
D-SXGA 21280x102460.276 58.069 
D-SXGA 31280x102431.650 29.800 
D-SXGA+ 11400x105063.970 60.190 
D-720p1280x72045.000 60.000 
D-1035i1920x103533.75060.000 (Interlace)
D-1080i1920x108033.75060.000 (Interlace)
D-1080i1920x108028.12550.000 (Interlace) 
						

							
7
Technical	Specifications
Mechanical Information 
 Projector Type      Multi-media Projector 
  Dimensions (W x H x D)    13.7” x 6.46” x.17.48” (348.1 mm x 164 mm x 444 mm)
 
  Net Weight      17.86 lbs (8.1 kg) (for LC-XG400L),  19.62 lbs (8.9 kg) (for LC-XG400)
 
  Feet Adjustment      0˚ to 5.0˚
 
 
Panel Resolution 
 LCD Panel System      1.0” TFT Active Matrix type, 3 panels  
  Panel Resolution      1,024 x 768 dots
 
  Number of Pixels      2,359,296 (1,024 x 768 x 3 panels)           
 
Signal Compatibility 
 Color System     PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N 
  High Definition TV Signal    480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
 
 Scanning Frequency     H-sync. 15 kHz–100 kHz, V-sync. 50 Hz–100 Hz        
 
Optical Information 
 Projection Image Size (Diagonal)  Adjustable from 30” to 300” (LC-XG400) 
  Throw Distance      3.9’–32.8’ (1.2 m–10.0 m) (LC-XG400)           
  Projection Lens      F=1.7 to 2.1, f=33 to 43 mm with motor zoom and focus (LC-XG400)
 
  Projection Lamp      330 W             
 
 
Interface
 Input 1        Digital (DVI-D) x 1, Analog (Mini D-sub 15 pin) x 1  
  Input 2        BNC Type x 5 (G or Video/Y, B or Cb-Pb, R or Cr-Pr, HV and V)
 
  Input 3        RCA Type x 1, Mini DIN 4 pin x 1
 
 AUDIO IN        Audio 1 (Mini Type stereo), Audio 2 (Mini Type stereo), Audio 3 (RCA Type) x 2 
 Analog Out     Mini D-sub 15 pin x 1 
 Audio Out      Audio (Mini Type stereo) x 1 
  R/C Jack        Mini Type (Wired Remote) x 1
 
  Control Port      Mini DIN 8 pin x 1 
 
  USB Connector       USB Series B x 1
 
  Option        Pj-to NetDirector Connector Terminal x 1
 
 
Audio 
 Internal Audio Amp      1.0 W RMS 
  Built-in Speaker      1 speaker, ø1.1” (28 mm) 
 
 
Power
 Voltage and Power Consumption  AC 100–120 V (4.6A Max. Ampere), 50/60 Hz (The U.S.A and Canada) 
          AC 200–240 V (2.3A Max. Ampere), 50/60 Hz (Continental Europe)     
 
Operating Environment
 Operating Temperature    41˚F–95˚F (5˚C–35˚C) 
  Storage Temperature    14˚F–140˚F (-10˚C–60˚C)
 
 
Remote Control 
  Battery        AAA or LR03 Type x 2             
  Operating Range      16.4’ (5 m/±30˚)
 
  Dimensions      1.8” (W) x 1.0” (H) x 5.7” (D) (45 mm x 25 mm x 145 mm)       
  Net Weight      3.5 oz (99 g) (including batteries)           
 Laser Pointer     Class II Laser (Max. Output: 1 m W/Wave length: 640–660 nm) 
Appendix 
						

							
7
     Model No. 
Short Fixed Lens    : 
AH-23631 
Long Zoom Lens    : 
AH-23541 
Ultra Long Zoom Lens     : 
AH-23661 
Short Zoom Lens    : 
AH-23511 
PJ-to NetDirector    : 
PjNET-30 
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. 
to the sales dealer.
Optional	Parts
Accessories
 Owner’s Manual (CD-ROM) 
  Quick Reference Guide
 
  AC Power Cord
 
  Remote Control and Batteries
 
  VGA Cable
 
  USB Cable
  Control Cable
  Remote Control Cable
 
  Lens Cap (for LC-XG400)
 
  PIN Code Label
 
●  The specifications are subject to change without notice.
●  LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny 
fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
Appendix 
						

							
74

This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information 
System Industries Association). The projector supports all commands defined by PJLink Class 1 and is verified 
conformance with PJLink Standard Class 1.
Projector Input
RGB
RGB (Scart)
RGB (PC Analog)
Video
Component
Auto
PJLink Input
RGB 3
RGB 2
RGB 1
VIDEO 1
VIDEO 2
Video
S-video
VIDEO 4
VIDEO 5
VIDEO 3
Input 2
Input 3
PJLink is a registered trademark of JBMIA and pending trademark in some \
countries.
PJ	Link	Notice
Parameter
13
12
11
21
22
24
25
23
RGB (PC Digital)DIGITAL 131
RGB (AV HDCP)DIGITAL 232
Input 1
NetworkNETWORK 151Input 4
Appendix 
						

							
75

Terminal : Mini DIN 8-PIN
CONTROL PORT CONNECTOR
Vcc
- Data
+ Data
Ground
1


4
2
3 4
1
R X D
-----
-----
GND
RTS/CTS
GND
GND
1


4
5
6
7
8
INPUT 1/ANALOG OUT
Terminal: Analog RGB (Mini D-sub 15 pin)
512341096781514131112
Configurations	of	Terminals
Red (R/Cr) Input/Output
Ground (Horiz.sync.)
Green (G/Y) Input/Output
-----
Blue (B/Cb) Input/Output
Ground (Red)
Ground (Green)
Ground (Blue)
1
5

4

6
7
8
Horiz. sync. Input/Output (Composite H/V sync.)
Ground (Vert.sync.)
DDC Data/ -----
Ground/ -----
Vert. sync.
DDC Clock/ -----
9
1
10
1
11
14
15
T X D
USB CONNECTOR (Series B)
DVI-D TERMINAL (DIGITAL) 
1917
21018
31119
41220
51321
61422
71523
81624
T.M.D.S. Data2–
No Connect
T.M.D.S. Data2+
No Connect
T.M.D.S. Data2 Shield
DDC Clock
DDC Data
Analog Vert. sync
1
5

4

6
7
8
T.M.D.S. Data1–
No Connect
T.M.D.S. Data1+
No Connect
T.M.D.S. Data1 Shield
+5V Power
Ground (for +5V)
Hot Plug Detect
9
1
10
1
11
14
15
16
T.M.D.S. Data0–
No Connect
T.M.D.S. Data0+
No Connect
T.M.D.S. Data0 Shield
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
17
1
18
0
19


4
12345876
Appendix
+5V Power/ ----- 
						

							
76

Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or 
lost the number and unable to operate the projector, contact the service station. 
PIN	Code	Number	Memo
Factory default set No: 1 2 3 4*
Factory default set No: 4 3 2 1*
* Should the four-digit number be changed, the 
factory set number will be invalid.
While the projector is locked with the PIN code...
Put the label below (supplied) on in a prominent place of the 
projector’s body while it is locked with a PIN code.
PIN Code Lock No  .
Logo PIN Code Lock No  .
Appendix 
						

							
77

13.7 (348.1)
1.65 (41.9)
5º MAX
7.87 (200)
6.46 (164)
21.09 (535.7)17.48 (444)
10.85 (275.5)
3.40 (86.4)
11.10 (282)
Screw Holes for Ceiling Mount
Screw: M6
Depth: 0.393 (10.0)

Dimensions
Unit: inch (mm)
Appendix 
						

							
U .S  .A .
EIKI International, Inc.
30251 Esperanza
Rancho Santa Margarita
CA 92688-2132
U.S.A.
Tel  : 800-242-3454 (949)-457-0200 
Fax  : 800-457-3454 (949)-457-7878
E-Mail : [email protected]
Deutschland & Österreich
EIKI Deutschland GmbH
Am Frauwald 12 
65510 Idstein
Deutschland
Tel  : 06126-9371-0 
Fax  : 06126-9371-14
E-Mail : [email protected]
Canada
EIKI CANADA - Eiki International, Inc.
P.O. Box 156, 310 First St. - Unit 2,
Midland, ON, L4R 4K8, Canada 
Tel  : 800-563-3454 (705)-527-4084
Fax  : 800-567-4069 (705)-527-4087
E-Mail : [email protected]
Eastern Europe
EIKI CZECH spol. s.r.o.
Umelecká 15
170 00 Praha 7 
Czech Republic
Tel  : +42 02 20570024
    +42 02 20571413 
Fax  : +42 02 20571411
E-Mail : [email protected]
ˆ
Japan & Worldwide
EIKI Industrial Company Limited.
4-12 Banzai-Cho, Kita-Ku, Osaka, 
530-0028 Japan
Tel  : +81-6-6311-9479 
Fax  : +81-6-6311-8486
WorldWide Website http://www  .eiki .com
KP3BL© 2007 Eiki International, Inc.
China
EIKI (Shanghai) Co.,LTD
1. Dapu Road, Golden Magnolia 
Plaza #2109 Shanghai, 
200023 China 
Tel : 86-21-5396-0088 
Fax  : 86-21-5396-0318
E-Mail : [email protected]