Eiki Lc-Xg250l Multimedia Projector Owners Manual

51
Screen Adjustment
Select Digital zoom +. The On-Screen Menu disappears and
“D. zoom +”appears. Press the SELECT button to expand
the image size. Use the Point 
ed7 8buttons to pan the
image. The Panning function can work only when the image
is larger than the screen size.
You can also enter the Digital zoom + mode by pressing the
D.ZOOM button on the remote control.
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM, SELECT, and Point buttons.
To return to the previous screen size,...

52
Screen AdjustmentScreen Size Adjustment (Video, Component Signals)
Press the MENU button to display the On-Screen
Menu. Use the Point 
7 8buttons to move the red
frame pointer to the Screen Menu icon.1
Use the Point edbuttons to move the red framed
pointer to the desired function and then press the
SELECT button.2
Provide the image at the 4:3 normal video aspect ratio. Normal
Wide
Provide the image at the 16:9 wide screen ratio.
✔Note:
• The Screen Menu cannot be operated when 720p, 1035i, or
1080i is...

53
Setting
The following setting options are available:Language  Select the language of the On-
Screen Menu.
Background Select the  background image for
no signal input.
Lamp control Select the brightness of the
lamp.
Pointer  Select the pointer shape.
Remote control Select the remote control code.
RC Sensor selection Select the location of
infrared remote receiver.
Display Select the screen display option
Logo Customize the screen logo
Security Set the Security function
Power management Set the Power...

54
Press the MENU button to display the On-Screen
Menu. Use the Point 
7 8buttons to move the red
frame pointer to the Setting Menu icon.1
2
Language
The language used in the On-Screen Menu is available in
English, German, French, Italian, Spanish, Portuguese,
Dutch, Swedish, Russian, Chinese, Korean, and Japanese.
Use the Point edbuttons to move the red framed
pointer to the desired item and then press the SELECT
button. The Setting dialog box appears.Press the SELECT
button at Language,
then the...

55
Setting
Capture
This function enables you to capture an image being
projected to use it for a starting-up display or interval of
presentations.
Select Capture and press the SELECT button. 
A confirmation box appears and select [Yes] to capture
the projected image.
After capturing the projected image, go to the Logo select
function and set it to “User”. Then the captured image
will be displayed the next time you turn on the projector
or when you press the NO SHOW button (see page 32).
To cancel the...

56
Setting
This function prevents an unauthorized person from
changing the screen logo.Off............ The screen logo can be changed freely from the Logo Menu (p.55).
On ............ The screen logo cannot be changed without a Logo PIN code.
If you want to change the Logo PIN code lock setting,
press the SELECT button and the Logo PIN code dialog
box appears. Enter a Logo PIN code by following the
steps below. The initial Logo PIN code is set to “4321”
at the factory. Logo PIN code lock
Enter a Logo PIN...

57
Setting
Remote controlRemote control
The eight different remote control codes (Code 1–Code 8)
are assigned to the projector; the factory-set, initial code
(Code 1) and the other seven codes (Code 2 to Code 8). 
The same code should set on both the projector and the
remote control. For example, operating the projector in
“Code 7”, the remote control code also must be switched
to “Code 7”.To change the code for the projector
Select a remote control code in this Setting Menu.
To change the code for the...

58
Setting
Power management
Time left before the lamp is off.
Press the SELECT button at
Power management and this
dialog box appears. Use the
Point 
7 8buttons to choose
one of the three options.
Press the Point 
dbutton to
select the timer, and then
use the Point 
7 8buttons to
set timer.
P ow er management
For reducing power consumption as well as maintaining the
lamp life, the Power management function turns off the
projection lamp when the projector is not used for a certain
period.
If the input...

59
Setting
Fan control
This function is used to set the cooling fans’ operation to the
projector’s setting environment. Set this function properly in
accordance with the projector’s installation method.
Otherwise, the cooling fans will not work properly and that
causes malfunctions of the projector and decreases the lamp
life.
Slant
Select the projector’s installation condition from the following
options:Off............ When using the projector with the upward/ downward inclination of 20 degrees to the...

60
Change the PIN code lock setting
Use the Point 7 8buttons to
switch between the options.
Use the Point 7 8button to select Off, On1, or On2 and
then move the pointer to “Quit” with the Point 
dbutton.
Press the SELECT button to close the dialog box.
Change the PIN code lock setting Enter a PIN code
Use the Point edbuttons or Number buttons on the
remote control to enter a number. Press the Point 
8
button to fix the number and move the red frame pointer
to the next box. The number changes to “ ✳.” If...