Eiki Lc-Xg250l Multimedia Projector Owners Manual

31
Basic Operation
Remote Control
Operating with Remote Control
Using the remote control for some frequently used operations is advisabl\
e. Just pressing one of the buttons
enables you to make the desired operation quickly without calling up the\
 On-Screen Menu.
Press the FREEZE button on the remote control to freeze
the picture on the screen. To cancel the Freeze function,
press the FREEZE button again or press any other button.
FREEZE button
Press the AUTO PC button on the remote control to operate...

32
Basic Operation
Press the NO SHOW button on the remote control to black
out the image. To restore to normal, press the NO SHOW
button again or press any other button. 
“No show” disappears after 4 seconds.
NO SHOW button
Press the P-TIMER button on the remote control. The P-
Timer display “00:00” appears on the screen and the
countdown starts (00:00–59:59).
To stop the countdown, press the P-TIMER button. To cancel
the P-Timer function, press the P-TIMER button again.
P-TIMER button
P-Timer display...

33
Input Selection
Select the input signal of equipment connected to the projector.
This projector has three input options (INPUT 1, INPUT 2, and INPUT 3)\
 and they are
categorized by different signal type. Select an input source with the IN\
PUT button
on the top control or the INPUT 1–3 buttons on the remote control, or\
 by On-Screen
Menu. 

34
Input Selection
Remote Control
INPUT buttons
Top Control
Input 
Press the INPUT 1, INPUT 2, or INPUT 3 buttons on the
remote control. The input source appears on the screen as
you press each button. Select the connected input source.
Remote Control Operation
INPUT button
Press the INPUT button on the top control. It switches to
INPUT 1, INPUT 2, and INPUT 3 as you press the INPUT
button. 
Before using the INPUT button on the top control, you must
select a correct input source by On-Screen Menu and...

35
Input Selection
Press the MENU button to display the On-Screen
Menu. Use the Point 
7 8buttons to move the red
frame pointer to the Input Menu icon.1
Use the Point edbuttons to move the red arrow
pointer to the desired input and then press the
SELECT button. The signal format menu appears.2
Use the Point edbuttons to select the desired signal
format and then press the SELECT button.3
Menu Operation
When the RGB PC (analog) signal is
connectedRGB (PC analog)
INPUT 1
When the RGB PC (digital) signal is...

36
Input Selection
Press the MENU button to display the On-Screen
Menu. Use the Point 
7 8buttons to move the red
frame pointer to the AV System Menu icon.1
V ideo System Selection
AV  System Menu (Video or S-Video)
AV System Menu (Component)
Use the Point edbuttons to move the red arrow
pointer to the desired system and then press the
SELECT button.2
If the projector cannot reproduce proper video image, select
a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N....

37
Computer Adjustment
Adjust the computer screen.
This projector has various types of signal formats to automatically tune\
s to most
computers. With these signal formats in the projector and the Auto PC Ad\
justment
function, no special setting is required and you can enjoy the images in\
 computers
just by connecting the computer to the projector.
If you need to adjust the computer screen, adjust the setting by followi\
ng this
chapter. You can also store the adjusted parameters in the projector and\...

38
Computer Adjustment
The Auto PC Adjustment
function operates to adjust 
the projector. 
PC System Menu
The PC System Menu icon Selected system is 
displayed.
Systems in this dialog box 
can be selected.Press the MENU button to display the On-Screen
Menu. Use the Point 
7 8buttons to move the red
frame pointer to the PC System Menu icon.
Use the Point edbuttons to move the red arrow
pointer to the desired system and then press the
SELECT button.  
1
2
Custom Mode (1–10) set in the
PC Adjust Menu...

39
Computer Adjustment
Auto PC Adjustment function is provided to automatically adjust Fine syn\
c, Total dots, Horizontal and Vertical
positions to conform to your computer.
Move the red frame pointer to Auto
PC Adj. and press the SELECT button.
“Please wait...” appears while the
Auto PC adjustment is in process.
PC Adjust Menu
PC Adjust Menu icon
To store adjustment parameters
The adjusted parameters from the Auto PC Adjustment can
be stored in the projector. Once the parameters are stored,
the setting...

40
Computer Adjustment
Press the MENU button to display the On-Screen
Menu. Use the Point 
7 8buttons to move the red
frame pointer to the PC Adjust Menu icon.1
2Use the Point edbuttons to move the red frame
pointer to the desired item and then press the SELECT
button to display the adjustment dialog box. Use the
Point 
7 8buttons to adjust the setting value.Move the red frame pointer
to the desired item and
press the SELECT button.
PC Adjust Menu
PC Adjust Menu icon
Use the Point 7 8buttons to adjust...