Eiki Lc-Xdp3500 Multimedia Projector Owners Manual

							18
Menu Operation
How To Operate On-Screen Display
1.  Press "Menu" button. Following menu will appear.
2.  Choose the item you want to enter. Press up / down /left/ right button on 
control panel or remote control to adjust item or value.
Up / Down / Right / Left button
Menu button
007 
						

							MENU (PC Mode)
19
MENU (PC Mode)
Picture Menu
Step:
1.	Use	the	▲	/▼	buttons	to	
select an item.
2.	Use	the	◄	/	►	cursor	
buttons to select an item or 
adjust the value.
ItemSelectionDescription
BRIGHTNESS000/100Adjust the image brightness level.
CONTRAST000/100Adjust the image contrast level.
SHARPNESS000/015Adjusts the image sharpness.
DISPLAY MODE
NATURALNatural color.
CINEMAEnhance contrast ratio when displaying DVD contents.
DAYLIGHTSuitable when ambient light is strong.
GREEN BOARD
WHITE BOARD
BLACK BOARD
Adjust the color settings to make the projected image on 
a (green, white, black) board more visible.
USER
User Red     000/100
User Green  000/100
User Blue    000/100
007 
						

							20
MENU (PC Mode)
Audio Menu
Step:
1.	Use	the	▲ 	/▼	buttons	
to select an item.
2.	Use	the	◄	/	►	
buttons to select an 
item or adjust the 
value.
ItemSelectionDescription
VOLUME00/40Adjust the volume.
MUTEOFF/ONMute the volume OFF / ON. 
						

							21
MENU (PC Mode)
Setting Menu
Step:
1.	Use	the	▲	/▼buttons	
to select an item.
2.	Use	the	◄	/	►	buttons	
to select an item or 
adjust the value.
ItemSelectionDescription
H POSITION000/100Move the image position horizontally.
This function can be used under computer signal input only.
V POSITION000/100Move the image position vertically.
This function can be used under computer signal input only.
PHASE000/100Adjust the image sharpness.
FREQUENCY000/200Set the horizontal scanning frequency.
AUTO
KEYSTONEOFF/ONCorrect keystone distortion in image automatically.
KEYSTONE V-70/+70Correct vertical keystone distortion in image manually.
AUTO SYNCEXECUTESet all of the above setting automatically.
AUTO SEARCHOFF/ONSearch signal source manually or automatically.
*DVI doesn't support H POSITION, V POSITION, PHASE, FREQUENCY and AUTO SYNC. 
						

							MENU (Video Mode)
22
MENU (Video Mode)
Picture Menu
Step:
1.	Use	the	▲	/▼	buttons	
to select an item.
2.	Use	the	◄	/	►	cursor	
buttons to select an 
item or adjust the 
value.
ItemSelectionDescription
BRIGHTNESS000/100Adjust the image brightness level.
CONTRAST000/100Adjust the image contrast level.
SHARPNESS000/015Adjusts the image sharpness.
COLOR000/100
Adjust the strength of whole color.
This function can be used under video signal, S-Video 
signal, or component video signal input only. 
TINT000/100
Adjust the image tint.
This function can be used under video signal, S-Video 
signal, or component video signal.
DISPLAY MODE
NATURALNatural color.
CINEMAEnhance contrast ratio when displaying DVD contents.
DAYLIGHTSuitable when ambient light is strong.
GREEN BOARD
WHITE BOARD
BLACK BOARD
Adjust the color settings to make the projected image on 
a (green, white, black) board more visible.
USER
User Red 
User Green
User Blue
007 
						

							23
MENU (Video Mode)
Audio Menu
Step:
1.	Use	the	▲	/▼	buttons	to	
select an item.
2.	Use	the	◄	/	►	buttons	
to select an item or 
adjust the value.
ItemSelectionDescription
VOLUME00/40Adjust the volume.
MUTEOFF/ONMute the volume OFF / ON. 
						

							24
MENU (Video Mode)
Setting Menu
Step:
1.	Use	the	▲	/▼buttons	to	
select an item.
2.	Use	the	◄	/	►	buttons	
to select an item or 
adjust the value.
ItemSelectionDescription
AUTO KEYSTONEOFF/ONAutomatically Correct keystone distortion in image.
V KEYSTONE -70/+70Correct vertical keystone distortion in image manually.
AUTO SEARCHOFF/ONSearch signal source manually or automatically. 
						

							MENU
25
MENU
Advanced Menu
Step:
1.	Use	the	▲	/▼buttons	
to select an item.
2.	Use	the	◄	/	►	
buttons to select an 
item or adjust the 
value.
ItemSelectionDescription
ZOOM / PANEXECUTEExecute digital zoom and pan function.
FREEZEOFF/ONFreeze the current image on the screen.
BLANKOFF/ONHide the image. Display on the screen turns into black.
BLANK POWER
OFF
15/30/60 
MinuteSet power off time after "Blank".
RESETEXECUTEReset all menu function to their factory default values.
RESIZE4:3, 16:9, 1:1
LANGUAGEENGLISH
English繁體中文 简体中文
日本語
한국어
Français
Deutsch
ItalianoPolski PortuguêsРусский
Español
Svenska
Українська
ไทย Dutch
SELECT SOURCEEXECUTE
Select the input source from:
RGB 1       RGB 2 
S-Video
Video
DVI-I
Y,Pb,Pr
The search starts from the current port. When an input is 
found, the projector will stop searching and display the 
image.
LOGO SETTINGEXECUTECustomize the start-up logo.
Select the language of the menu and on screen display 
massage. 
						

							26
MENU
Advanced Menu
LOGO SETTING
This function allows you 
to customize the start-up 
logo.
IMPORTANT:
To execute the logo 
function, you must enter 
the PIN code first. 
ItemSelectionDescription
LOGO MODE
DEFAULT
USER
OFF
Select	Mode(	►	cursor	button)
The factory logo.
The image you captured.
The blank image. You can select color with background 
function.
LOGO
CAPTUREEXECUTEStart to capture the image.(PC mode only)
BACKGROUND
BLACK
BLUE
WHITE
Set background color.
LOGO SIZEORIGINAL
FULL
Display the captured image in original size and put in the 
center of the screen.
Expand the image to full screen. 
						

							27
MENU
NOTE	 ►You	can	capture	an	image	only	in	computer	mode.
	 ►The	area	that	can	be	captured	is	512	x	384	dots.
Advanced Menu
Logo Capture
How to use this function?
	Select Logo Capture item in the logo 
setting	menu,	then	press	►	button.
	Red frame will appear to select captures 
area.
	Use 4 direction buttons to adjust the 
position of the frame.
	Press “MENU” to start capturing and 
display a dialog.

Image

Logo Capture In Progress.