Eiki Lc-Xd25 Multimedia Projector Owners Manual

51

Setting
Power management
For  reducing  power  consumption  as  well  as  maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not used for a certain period.When  the  input  signal  is  interr upted  and  no  button  is pressed  for  more  than  30  seconds,  the  timer  display  with No  signal  appears.   The  countdown  starts  to  turn  off  the lamp.
Select one of the operations:
Ready. . . . . . . .When  the  lamp  has  been  fully...

52

Setting
Remote control
This  projector  provides  two  different  remote  control  codes: the  factor y-set  initial  code  (Code  1)  and  the  secondar y code  (Code  2).  This  switching  function  prevents  remote control  interference  when  operating  several  projectors  or video equipment at the same time.W h e n  o p e r a t i n g  t h e  p r o j e c t o r  i n  " C o d e  2 " ,  b o t h  t h e projector  and  the  remote  control  must  be  switched  to "Code 2".
To change...

53

Setting
Key lock
Security (Key lock and PIN code lock settings)
This function allows you to use Key lock and PIN code lock function to set the security for the projector operation.
This  function  locks  operation  of  the  top  control  or  the remote control.It  is  useful  to  prevent  operation  by  an  unauthorized person.
. . . . . .not locked.
. . . . . .l o c k  t h e  o p e r a t i o n  o f  t h e  t o p c o n t r o l .    To   u n l o c k ,   u s e   t h e remote control.. . . . . .lock...

54

Setting
To Enter the PIN code
Select  a  number  by  pressing  the  Point ed  buttons.  And then  press  the  Point 8 button  to  fix  the  number  and  move the  pointer.    The  number  changes  to  "✳".    If  you  fixed  an incorrect number, move the pointer to the number you want to  correct  by  pressing  the  Point 7  button,  and  then  select the correct number by pressing the Point ed buttons.
Repeat this step to complete entering a four-digit number. 
After  entering  the...

55

Setting
This  function  provides  the  following  alter natives  in  the cooling fans operation after turning off the projector. (p.20)
L1. . . . . .normal operationL2. . . . . .s l ow e r  a n d  l ow e r - s o u n d  t h a n  t h e  n o r m a l operation  (L1),  but  it  takes  longer  to  cool  the projector down.
✔ Note:
   S e t t i n g  “ Fa n  c o n t r o l ”  t o  O n 1  o r  O n 2  a f fe c t s  L 2 operation in “Fan.” 
Fan
This projector provides Fan control function in the Setting...

56

T h i s  f u n c t i o n  i s  u s e d  t o  r e s e t  t h e  l a m p  r e p l a c e m e n t counter.    When  replacing  the  projection  lamp,  reset  the lamp  replacement  counter  by  using  this  function.    See page 62 for operation.
Lamp counter 
Factory default
This  function  returns  all  setting  values  except  for  the  user logo,  PIN  code  lock,  Logo  PIN  code  lock,  and  the  lamp counter to the factory default settings.
Exit the Setting Menu.
Quit
Closed Caption
Closed...

57

Maintenance and Cleaning
The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance.
Warning indicator
T h e   p r o j e c t o r   i s   s h u t   d o w n   a n d   t h e   WA R N I N G 
indicator is blinking red .
When  the  temperature  inside  the  projector  reaches  a cer tain  level,  the  projector  is  automatically  shut  down  to protect  the  inside  of  the  projector....

58

Maintenance and Cleaning
Turn  off  the  projector,  and  disconnect  the  AC  power cord from the AC outlet.
Remove the air filter by pulling the latch horizontally.
Air  filter  prevent  dust  from  accumulating  on  the  optical  elements  inside  the  projector.    Should  the  air  filter become clogged with dust particles, it will reduce cooling fans' effectiveness and may result in internal heat build up and adversely affect the life of the projector.  Clean the air filter following the...

5

Maintenance and CleaningMaintenance and Cleaning
Cleaning the Projector Cabinet
Softly wipe the projector body with a soft, dry cleaning cloth.  When it is heavily soiled, use a small amount of mild detergent and finish with a soft, dry cleaning cloth.  Avoid using an excessive amount of cleaner.  Abrasive cleaners,  solvent,  or  other  harsh  chemicals  might scratch the surface.
Follow these steps to clean the projector cabinet.
When the projector is not in use, put the projector in an...

60

Maintenance and Cleaning
When the life of the projection lamp of this projector draws to  an  end,  the  LAMP  REPLACE  indicator  emits  a  yellow light.  If this indicator lights yellow, replace the lamp with a new one promptly.
Lamp Replacement
Top Control
T h i s  i n d i c a t o r  i s  ye l l ow w h e n   t h e   l i f e   o f   t h e projection  lamp  draws  to an end.
For  continued  safety,  replace  with  a  lamp  of  the  same  type.    Do  not  drop  a  lamp  or  touch  a  glass bulb!...