Eiki Lc-Xbm26 Multimedia Projector Owners Manual
Have a look at the manual Eiki Lc-Xbm26 Multimedia Projector Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31 Computer Input Store To store the adjusted data, select Store and then press the Point ► or the SELECT button. Move the highlight to one of the Modes 1 to 10 in which you want to store, and then press the SELECT button. Mode free To clear the stored data, select Mode free and then press the Point ► or the SELECT button. Move the highlight to the Mode that you want to clear and then press the SELECT button. Note: • Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the PC System Menu (p.8). • When input computer signal to the projector, PC adjust will become available. Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures. This Mode has stored parameters. Values of Total dots, Horizontal, Vertical, Display area H, and Display area V. Vacant Press SELECT button to store the data. Press MENU button to close this dialog box. Mode free Store
3 Computer InputComputer Input Image select Menu IMAGE button Dynamic Real Image 1 Image 2 Image 3 Image Mode Selection Image 4 Blackboard(Green) Standard Remote Control IMAGE button Select the desired image mode among Dynamic, Standard, Real, Cinema, Blackboard (Green), Colorboard, Image 1, Image 2, Image 3 and Image 4 by pressing the IMAGE button on the remote control. Standard Picture mode with improved halftone for graphics. Real Blackboard (Green) Image 1–4 For the image projected on a blackboard.This mode helps enhance the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board. Dynamic Direct Operation For viewing pictures in a bright room. Normal picture mode preset on the projector. For viewing with the user preset image mode in the Image Adjust Menu (see page 33). 1 2 Menu Operation Colorboard Colorboard At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors. Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image select and then press the Point ► or the SELECT button. Use the Point ▲▼ buttons to select the desired item and then press the SELECT button. Picture mode adjusted with fine tone. Cinema Cinema
33 Computer Input Image Adjust Menu Image Adjustment Reset Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► or the SELECT button. 1 2Use the Point ▲▼ buttons select the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point ◄► buttons to adjust the setting value. Note:• When White balance Red, Green or Blue is adjusted, Color temp . will change to User.• When Blackboard(Green) or Colorboard is selected in Image select, Color temp . will change to Blackboard or Colorboard. Press the Point ◄ button to decrease the contrast; press the Point ►button to increase the contrast (from 0 to 63). Press the Point ◄ button to decrease the brightness; press the Point ►button to increase the brightness (from 0 to 63). Contrast Brightness Press the Point ◄ button to lighten R/G/B tone; press the Point ► button to deepen R/G/B tone (from 0 to 63). White balance (Red / Green / Blue) Use the Point ◄► buttons to select the desired Color temp. level (XLow, Low, Mid, or High). Color temp . Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Gamma Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 15). Sharpness To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures. Use the Point ◄► buttons to adjust the setting value. Selected Image mode Store To store the adjusted data, select Store and press the Point ► or the SELECT button. Use the Point ▲▼ buttons to select one from Image 1 to 4 and press the SELECT button. A confirmation box appears and then select Yes. Stored data can be called up by selecting an Image (1-4) in the Image Mode Selection on page 3. A confirmation box appears and then select Yes. Store Press the Point ◄► buttons to select Off or On.Off ...... Disabled.On ...... The iris function is activated. Iris
34 Computer InputComputer Input This projector has the picture screen resize function, which enables you to customize the image size. Screen Menu Screen Size Adjustment Provide the image to fit the screen size.Normal True Provide the image in its original size. When the original image size is larger or smaller than the screen size (104 x 768), the projector enters to the panning mode automatically. Use the Point ▲▼◄► buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear. Full Provide the full screen image. Note: • This projector cannot display any resolution higher than 19 0 x 1 00. If your computer ’s screen resolution is higher than it, reset the resolution to the lower before connecting to the projector. • The image data in other than 10 4 x 768 is modified to fit the screen size in initial mode. • True and Digital zoom +/– are disabled and cannot be displayed when 480i, 575i, 480p 575p, 720p,1035i or 1080i is selected in the PC System Menu (p. 8). • When True is selected in the Screen menu, Digital zoom +/- can not be selected. 1 2 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Screen and then press the Point ► or the SELECT button. Use the Point ▲▼ buttons select the desired item and then press the SELECT button . CustomProvide the last stored aspect screen image. Wide (16:9) Provide the image at the 16:9 wide screen ratio. Adjust the screen scale and position manually with this function. Press the Point ► button at Custom adj. and the Custom adjustment menu is displayed on the screen, you can use the Point ▲▼ buttons to choose the item you want to adjust. Scale H/V .......... Adjust the Horizontal/Vertical screen scale. H&V ................... When set to On, the aspect ratio is fixed. The Scale V appears dimmed and becomes unavailable. Adjust Scale H, then the screen scale is automatically modified based on the aspect ratio. Position H/V ..... Adjust the Horizontal/Vertical screen position. Common ........... Save the adjusted scale or position to all the inputs. Press the SELECT button at Common to display a confirmation box. To save the scale or position, press the SELECT button at Yes. When Custom is selected, the saved scale or position is used. Reset ................. Reset the all adjusted values. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at Yes. Custom adj . Note: • When no signal is detected, Normal is set automatically . • T h e a d j u s t a b l e r a n g e f o r S c a l e H / V a n d Position H/V is limited depending on the input signal. Zoom Scale the image proportionally to fit the entire screen. Either side of image may go over the screen. Custom adj .
35 Computer Input Select Digital zoom +. The On-Screen Menu disappears and D. zoom + appears. Press the SELECT button to expand the image size. Use the Point ▲▼◄► buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM ▲ or the SELECT button on the remote control. To exit the Digital zoom +/– mode, press any button except the D.ZOOM ▲▼ buttons, SELECT and Point buttons. Digital zoom + Select Digital zoom –. The On-Screen Menu disappears and D. zoom – appears. Press the SELECT button to compress image size. The projected image can be also compressed by pressing the D.ZOOM ▼ or the SELECT button on the remote control. Digital zoom – To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see page 7) again, or adjust the screen size with the D.ZOOM ▲▼ buttons. Note: • The minimum compression ratio is limited depending on the input signal, when the Keystone function is working or when the custom is selected for the screen size. • True and Digital zoom +/– are disabled and cannot be displayed when 480i, 575i, 480p 575p, 720p,1035i or 1080i is selected in the PC System Menu (p.8). • Digital zoom +/- cannot be selected when True is selected. • The minimum compression ratio is limited at Normal screen size. Remote Control D.ZOOM + button POINT ▲▼◄► buttons SELECT button D.ZOOM - button When this function is set to On, the picture will be top/bottom and left/right reversed. This function is used toproject the image from a ceiling-mounted projector. Ceiling When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen. Rear To reset the adjusted data, select Reset and press theSELECT button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures. Reset Keystone This function is used to adjust keystone distortion of the projected image. Use the Point ▲▼ buttons to choose the item you want to adjust. Keystone To correct keystone distortion, press the SELECT button. Keystone appears on the screen. Use the Point ▲▼ buttons to correct keystone distortion (p.3). Store or Reset To store or reset the keystone correction, press the Point ► button. Store ............. Keep the keystone correction even when the AC power cord is unplugged. Reset ............. Release the keystone correction when the AC power cord is unplugged. Keystone Ceiling Rear
36 Video InputVideo Input Choose Video or S-video by pressing the VIDEO or the S-VIDEO button on the remote control.Before using these buttons, correct input source should be selected through menu operation as described below. 1 2 Video Input Source Selection (Video, S-video) Direct Operation When video input signal is connected to the VIDEO jack, select Video.Video When the input source is coming from video equipment connected to the COMPUTER IN 1/S-VIDEO IN/COMPONENT IN terminal with a S-video-VGA cable, select S-video. S-video Note: When the Input Search function is set to On 1 or On 2 in the Auto setup function, the input signal will be searched automatically (p.45). Remote Control VIDEO button Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Input and then press the Point ► or the SELECT button. Use the Point ▲▼ buttons to select Video and then press the SELECT button. S-VIDEO button Video S-video Use the Point ▲▼ buttons to select Computer 1. And then press the Point ► button to access the submenu items. Use the Point ▲▼ buttons to select the S-video and then press the SELECT button. Computer 1 Menu Operation S-video Press the Point ▲▼ buttons to select S-video.
37 Video Input Choose Computer 1(Component) or Computer 1(Scart) by pressing the COMPONENT or the COMPUTER 1 button on the remote control.Before using these buttons, correct input source should be selected through Menu operation as described below. 1 Input Menu 2Use the Point ▲▼ buttons to select Computer 1 and then press the Point ► button. Input Source Selection (Component, RGB Scart 21-pin) When the input source is coming from video equipment connected to the COMPUTER IN 1/S-VIDEO IN/COMPONENT IN terminal with a Component-VGA Cable, select Component. Component When the input source is coming from video equipment connected to the COMPUTER IN 1/S-VIDEO IN/COMPONENT IN terminal with a Scart-VGA Cable, select RGB (Scart). RGB (Scart) Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Input and then press the Point ► or the SELECT button. Note: When the Input Search function is set to On 1 or On 2, the input signal will be searched automatically (p.45). COMPUTER 1 button Remote Control 3Use the Point ▲▼ buttons to select Component or RGB(Scart) and then press the SELECT button. Computer 1(RGB) Computer 1(Scart) COMPONENT button Computer 1(Component) Direct Operation Menu Operation Press the Point ▲▼ buttons to select Component or RGB(Scart).
38 Video System Selection 1AV System Menu (Video or S-video) AV System Menu (Component) 2 If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M and PAL-N. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance. If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i and 1080i. Auto COMPONENT VIDEO SIGNAL FORMAT Video or S-video Component The projector automatically detects an incoming video system, and adjusts itself to optimize its performance.When Video System is PAL-M or PAL-N, select the system manually. Auto Note: The AV System Menu cannot be selected when selecting RGB (Scart). Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Input and then press the Point ► or the SELECT button. Select Video, Computer 1(S-video) or Computer 1(Component) input source. (See pages 36-37) 3Use the Point ▲▼ buttons to select System and then press the Point ► or the SELECT button. Use the Point ▲▼ buttons to select the desired system and then press the SELECT button. Video Input
39 Video Input Image select Menu IMAGE button Dynamic Real Image 1 Image 2 Image 3 Image Mode Selection Image 4 Blackboard (Green) Standard Remote Control IMAGE button Select the desired image mode among Dynamic, Standard, Real, Cinema, Blackboard (Green), Colorboard, Image 1, Image 2, Image 3 and Image 4 by pressing the IMAGE button on the remote control. Standard Picture mode with improved halftone for graphics. Real Blackboard (Green) Image 1–4 For the image projected on a blackboard.This mode helps enhance the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board. Dynamic Direct Operation For viewing pictures in a bright room. Normal picture mode preset on the projector. For viewing with the user preset image mode in the Image Adjust Menu (see page 41). 1 2 Menu Operation Colorboard Colorboard At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors. Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image select and then press the Point ► or the SELECT button. Use the Point ▲▼ buttons to select the desired item and then press the SELECT button. Picture mode adjusted with fine tone. Cinema Cinema
40 Image Adjustment 1 2 Press the Point ◄ button to decrease the contrast; press the Point ► button to increase the contrast (from 0 to 63). Press the Point ◄ button to decrease the brightness; press the Point ► button to increase the brightness (from 0 to 63). Contrast Brightness Press the Point ◄ button to lighten R/G/B tone; press thePoint ► button to deepen R/G/B tone (from 0 to 63). White balance (Red / Green / Blue) Use the Point ◄► buttons to select the desired Color temp. level (XLow, Low, Mid or High). Color temp . Press the Point ◄ button decrease the intensity of the color; press the Point ► button increase the intensity of the color (from 0 to 63). Press the Point ◄► buttons to adjust the tint value to get a proper color balance (from 0 to 63). Color Tint Note: • When the White balance Red, Green or Blue is adjusted, the Color temp. level will change to User. • Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p. 38). • When Blackboard (Green) or Colorboard is selected in Image select, Color temp . will change to Blackboard or Colorboard. Image Adjust MenuPress the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Image adjust and then press the Point ► or the SELECT button. Use the Point ▲▼ buttons select the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point ◄► buttons to adjust the setting value. Selected Image mode Use the Point ◄► buttons to adjust the setting value. Video Input Press the Point ◄► buttons to select Off or On.Off ...... Disabled.On ...... The iris function is activated. Iris Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 15). Sharpness Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Gamma