Eiki Lc-Xbm26 Multimedia Projector Owners Manual

Multimedia  Projector 
MODEL LC-XBM21
  LC-XBM26
Network Supported 	 Wired	LANRefer	to	the	Owner's	Manuals	below	for	details	about	network	function.
	Network	Set-up	and	Operation
	PJ	Network	Manager
Owner's Manual 



Features and Design
This	Multimedia	Projector	is	designed	with	the	most	advanced	technology	for	portability,	durability,	and	ease	of	use.	This	projector	utilizes	built-in	multimedia	features,	a	palette	of	16.77	million	colors,	and	matrix	liquid	crystal	display	(LCD)	technology.
♦	 Compact	Design
	 This	projector	is	designed	compact	in	size	and	weight.	It	is	easy	to	carry	and	installed	anywhere	you	wish	to	use.
♦	 Simple	Computer	System	Setting
	 The	projector	has	the	Multi-scan	system	to	conform...

3

Table	of	Contents
TrademarksEach	name	of	corporations	or	products	in	this	book	is	either	a	registered	trademark	or	a	trademark	of	its	respective	corporation.
Features and Design  .  .  .  .  .  .  .  .  .  .  .  .  .  .2
Table	of	Contents .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3
To	the	Owner .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Safety	Instructions .  .  .  .  .  .  .  .  .  .  .  .  .  .  . .5
Air	Circulation	6
Installing	the	Projector	in	Proper	Position	6
Moving...

4

To	the	Owner
CAUTION:				TO	REDUCE	THE	RISK	OF	ELECTRIC	SHOCK,	DO	NOT	REMOVE	COVER	(OR	BACK).	NO	USER-SERVICEABLE	PARTS	INSIDE	EXCEPT	LAMP	REPLACEMENT.	REFER	SERVICING	TO	QUALIFIED	SERVICE	PERSONNEL.
THIS	SYMBOL 	INDICATES	THAT	DANGEROUS	VOLTAGE	CONSTITUTING	 A	RISK	OF	ELECTRIC	SHOCK	IS	PRESENT	WITHIN	THIS	UNIT.
THIS	SYMBOL 	INDICATES	THAT	THERE	ARE	IMPORTANT	OPERATING	 AND	MAINTENANCE	INSTRUCTIONS	IN	THE	OWNER'S	MANUAL	WITH	THIS	UNIT.
CAUTION
RISK	OF	ELECTRIC	SHOCK
DO	NOT	OPEN
Before	installing...

5

To	the	OwnerSafety	Instructions
All	the	safety	and	operating	instructions	should	be	read	before	the	product	is	operated.
Read	all	of	the	instructions	given	here	and	retain	them	for	later	use.	Unplug	this	projector	from	AC	power	supply	before	cleaning.	Do	not	use	liquid	or	aerosol	cleaners.	Use	a	damp	cloth	for	cleaning.
Follow	all	warnings	and	instructions	marked	on	the	projector.
For	added	protection	to	the	projector	during	a	lightning	storm,	or	when	it	is	left	unattended	and	unused	for	long	periods...

6

Safety	Instructions
Openings	in	the	cabinet	are	provided	for	ventilation.	To	ensure	reliable	operation	of	the	product	and	to	protect	it	from	overheating,	these	openings	must	not	be	blocked	or	covered.	
	CAUTION
Hot	air	is	exhausted	from	the	exhaust	vent.	When	using	or	installing	the	projector,	the	following	precautions	should	be	taken.	
–			Do	not	put	any	flammable	object	or	spray	can	near	the	projector,	hot	air	is	exhausted	from	the	ventilation	holes.–			Keep	the	exhaust	vent	at	least	3’ 	(1	m)	away...

7

Compliance
Federal Communications Commission Notice
Note:	This	equipment	 has	been	 tested	 and	found	 to	comply	 with	the	limits	 for	a	Class	 B	digital	 device,	pursuant	 to	Part	 15	of	the	 FCC	 Rules.	 These	limits	are	designed	 to	provide	 reasonable	 protection	against	harmful	interference	 in	a	residential	 installation.	 This	equipment	 generates,	 uses,	and	can	radiate	 radio	frequency	 energy,	and	if	not	 installed	 and	used	 in	accordance	 with	the	instructions,	 may	cause	 harmful...

8

Part Names and Functions
Back
①	Top	controls	and	Indicators②	Zoom	Ring③	Focus	Ring④	Speaker⑤	 Infrared	Remote	Receiver⑥	Projection Lens⑦	Lens Cap	 (See	page	60	for	attaching.)
⑧	Air	Intake	Vent
⑨	Lamp Cover⑩	Terminals	and	Connectors⑪	LAN	Connection	Terminal⑫ Power Cord Connector⑬ Exhaust	Vents
	CAUTION
Hot	air	is	exhausted	from	the	exhaust	vent.	Do	not	put	heat-sensitive	objects	near	this	side.
⑭	Filter ⑮	Adjustable	Foot
Note:
⑪	LAN	Connection	Terminal	is	for	the	Network	function.	Refer	to	the...

9

‰
(MIC)-

Part Names and Functions
Rear	Terminal	
②③①
⑥
⑤
⑧
④
④			VIDEO	IN	 Connect	the	composite	video	output	signal	to	this	jack	(p.15).
② 	COMPUTER	IN	1	/S-VIDEO	IN	/	COMPONENT	IN	 Connect	output	signal	from	a	computer,	component	video	output,	RGB	scart	1-pin	video	output	or	S-video	output	to	this	terminal.	(pp.14-16).
⑥ 	AUDIO	OUT	(VARIABLE)	 Connect	an	external	audio	amplifier	to	this	jack	(pp.14-16).	 This	terminal	outputs	sound	from	 AUDIO	IN	terminal.
⑤			LAN	Connection	Terminal...

10

Part Names and Functions
Top	Control
⑦ 	LAMP	REPLACE	indicator	 Lights	yellow	when	the	projection	lamp	reaches	its	end	of	life	(pp.61,	69).
⑧ 	WARNING	indicator	 –	Lights	red	when	the	projector	detects	an	abnormal	condition.		 –	Blinks	red	when	the	internal	temperature	of	the	projector	exceeds	the	operating	range	(pp.58,	69).④		ON/STAND–BY 	buttonTurn	the	projector	on	or	off	(pp.18-0).
⑤ 	POWER	indicator	 –	Lights	red	when	the	projector	is	in	stand-by	mode.	 –	Lights	green	during	operations.	 –...