Eiki Lc-Xbl20 Multimedia Projector Owners Manual
Have a look at the manual Eiki Lc-Xbl20 Multimedia Projector Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
51 Setting Standby mode This function is available when operating the projector via network. Network .... Supply the power to the network function even after turning off the projector by pressing the ON/STAND-BY button on the remote control. You can turn on/off the projector via network, modify network environment, and receive an e-mail about projector status while the projector is powered off. Eco ............ Select Eco when you do not use the projector via network. The projector’s network function will stop when turning off the projector, you can not turn on the projector via network. Refer to the owner’s manual of “Network Set-up and Operation”. Note: • Factory default is Eco. • When selecting Network, the cooling fans may be running depending on the temperature inside the projector even if the projector is turned off. • Set Standby mode to Network when On start, control port or network functions are available. Closed Caption Closed Caption Closed Caption is a function that displays the audio portion of a TV program as text on the screen. If the input signal contains closed captions, you can turn on the feature and switch the channels. Press the Point ▲▼ buttons to select Off, CC1, CC2, CC3 or CC4. If the closed caption is not clear, you can change the text from Color to white. Press the Point ▲▼ buttons to select Off, CC1, CC2, CC3 or CC4, and then press the SELECT button. Note: The Closed Caption is available only under the situation below. • When the input signal is Component (for adjustment only), Video or S-video, and the system is set to Auto, NTSC or 480i, the Closed caption is available. • If the system is set to Auto, and choose NTSC or 480i as the input signal, the Closed caption will be available. • Closed Caption will be unavailable when under other setting conditions. • The Closed caption is unavailable when On-Screen menu and P-Timer are displayed. • The item of Closed Caption is displayed in gray while it is not available.
52 Setting Remote control This function allows you to change brightness of the screen. Lamp control Remote control Lamp life control Lamp control Select the lamp operation when the total lighting time of a lamp exceeds the recommended total hours of use. Mode 1 .............. The lamp can be turned on even after exceeding the recommended total hours of use. Mode 2 .............. The lamp can be turned on even after exceeding the recommended total hours of use. But the projector turns off automatically after 3 minutes. Lamp life control Note: • Lamp mode cannot be changed for a while after turning on the projector. Lamp needs some time to stabilize after the power is turned on. Stored lamp mode will be active after the lamp is stabilized. • If Mode 2 has been selected and the projection lamp exceedes the recommended total hours of use, the replacement icon will be displayed at the time of power- on. Then the projector will turn off after 3 minutes. • The Lamp replacement icon will not appear when the Display function is set to Off (p.45), during Freeze (p.25), or No show (p.26). Lamp replacement icon This projector provides two different remote control codes: the factory-set initial code (Code 1) and the secondary code (Code 2). This switching function prevents remote control interference when operating several projectors or video equipment at the same time. When operating the projector in Code 2, both the projector and the remote control must be switched to Code 2. To change the code for the projector: Select either Code 1 or Code 2 in this Setting Menu. To change the code for the remote control: Press and hold both the MENU and IMAGE buttons together for 5 seconds or more. After changing the code, make sure the remote control operates properly. Note: • When different codes are set on the projector and on the remote control, any operation cannot be made. In that case, switch the code on the remote control to fit the code on the projector. • If the batteries are removed from the remote control for a long period of time, the remote control code will be reset. High .......... Brighter than the Normal mode. Normal ...... Normal brightness Eco ............ Lower brightness reduces the lamp power consumption and extends the lamp life.
53 Setting Key lock Key lockSecurity (Key lock and PIN code lock) PIN code lock This function locks the top control and remote control buttons to prevent operation by unauthorized persons. Select Key lock and then press the SELECT button, and select the desired item by pressing the Point ▲▼ buttons. ..... Unlocked. ..... Lock the operation of the top control. To unlock, use the remote control. ..... Lock the operation of the remote control. To unlock, use the top control. If the top control accidentally becomes locked and you do not have the remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center. This function allows you to use the Key lock and PIN code lock function to set the security for the projector operation. This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security. Off ........... Unlocked. On1 ......... Enter the PIN code every time turning on the projector. On2 ......... Enter the PIN code to operate the projector once the power cord is disconnected; as long as the AC power cord is connected, the projector can be operated without a PIN code. Whenever you change the PIN code lock setting or the PIN code (the four-digit number), you are required to enter the PIN code. The “1234” is set as the initial PIN code at the factory. If you want to change the PIN code lock setting, Press the SELECT button and the PIN code dialog box appears. When the projector is locked with the PIN code, the Security icon appears on the guide. PIN code lock
54 Setting Use the Point ▲▼ buttons to select Off, On1 or On2, and then press the SELECT button to make a choice. Change the PIN code lock setting Enter a PIN code Use the Point ▲▼ buttons to enter a number. Press the Point ◄ ► buttons to fix the number and move the red frame pointer to the next box. The number changes to . If you fixed an incorrect number, use the Point ◄ ► buttons to move the pointer to the number you want to correct, and then enter the correct number. Repeat this step to complete entering a four-digit number. After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can change the following PIN code lock setting. If you entered an incorrect PIN code, PIN code and the number () will turn red for a moment. Enter the correct PIN code all over again. Enter a PIN code Change the PIN code Change the PIN code CAUTION: wHEN yOU HAVE CHANGED THE PIN CODE, wRITE DOwN THE NEw PIN CODE IN COLUMN OF THE PIN CODE NO . MEMO ON PAGE 75, AND KEEP IT SECURELy . IF yOU FORGET yOUR PIN CODE, THE PROjECTOR CAN NO LONGER BE STARTED . The PIN code can be changed to your desired four-digit number. Press the SELECT button to select PIN code change . Pin code dialog box appears, use the Point ▲▼ buttons to enter the correct code. The New PIN code input dialog box appears. Set a new PIN code.
55 Setting This function provides the following options in the cooling fans’ operation when the projector is turned off (p.20). L1 ...... Normal operation L2 ...... Slower and lower-sound than the normal operation (L1), but it takes more time to cool the projector down. Fan This projector provides Fan control function in the Setting menu. Choose the running speed of cooling fans from the following options according to the ground elevation under which you use the projector. Off................ Normal speed. Set this function to Off when using the projector in non-high altitude environment. On1............. Faster than Off mode. Select this mode when using the projector in high altitudes (about 1,000 meters to 2,000 meters above the sea level) where the fans have less cooling effect. On2............. Faster than On1 mode. Select this mode when using the projector in higher altitudes (about 2,000 meters to 3,000 meters above the sea level) where the fans have lesser cooling effect. Note: The fan noise becomes louder in On1 and On2. Fan control Lamp counter Be sure to reset the Lamp replacement counter after the lamp is replaced. (p.61) Press the Point ▲▼ buttons to choose the Lamp counter function and then press the Point ► or the SELECT button to access the submenu items. Lamp counter................This item shows the total accumulated time of the lamp usage. Lamp counter reset....... Press the the SELECT button to choose Lamp counter reset . Select yes in the confirmation box if you want to reset the lamp counter, and then choose yes in the second confirmation box to reset lamp counter. Lamp counter reset
56 Setting Factory default This function returns all setting values except for the User logo , PIN code lock, Logo PIN code lock, Lamp counter and Filter counter to the factory default settings. Factory default w arning log This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 warning logs are displayed with the latest warning message at the top of the list, followed by previous warning messages in chronological order. Note: When the Factory default function is executed, all the warning log records will be deleted. This function is used to set a frequency for the filter cleaning. When the projector reached a specified time between cleanings, a Filter warning icon appears on the screen, notifying the cleaning is necessary. After cleaning the filter, be sure to select Reset and set the timer. The Filter warning icon will not turn off until the filter counter is reset. For details about resetting the timer, refer to “Resetting the Filter Counter” on page 59. Filter counter Filter counter Press the SELECT button to select Timer, and then use the Point ▲▼ buttons to set the timer. Select from (Off/100H/ 200H/ 300H) depending on the use environment.Filter warning icon appears on the screen at a set time. Fig .1 Filter warning icon Note: This icon also appears at turning on. Note: The Filter warning icon (Fig.1) will not appear when the Display function is set to Off (p.45), during Freeze(p.25), or No show (p.26). Filter counter reset
57 Information Input Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector. H-sync freq . V-sync freq . Lamp counter Information Menu The horizontal frequency of the input signal is displayed in KHz, or - - - - - when no signal. The vertical frequency of the input signal is displayed in Hz, or - - - - - when no signal. Numbers of Hz doubles when during Interlace. The cumulative lamp operating time is displayed. Direct Operation Press the INFO. button on the remote control to display the Information Menu. INFO . button Remote Control Press the Point ▲▼ buttons to select the Information. The Information Menu is displayed. See below for displayed information. Menu Operation Power management Screen Off , Ready, Shut down or Timer is displayed. The selected screen size is displayed. Input Lamp status The selected input source is displayed. The selected lamp mode is displayed. Language The selected language is displayed. Key lock The selected Key lock icon is displayed. PIN code lock Off or On1 or On2 is displayed. Remote control The selected remote code is displayed.
58 The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance. wARNING indicator The projector is shut down and the w ARNING indicator is blinking red . When the temperature inside the projector reaches a certain level, the projector will be automatically shut down to protect the inside of the projector. The POWER indicator is blinking while the projector is being cooled down. When the projector has cooled down enough (to its normal operating temperature), it can be turned on again by pressing the ON/ STAND-BY button. The projector is shut down and the w ARNING indicator lights red . When the projector detects an abnormal condition, it is automatically shut down to protect the inside of the projector and the WARNING indicator lights red. In this case, unplug the AC power cord and reconnect it, and then turn the projector on once again to verify operation. If the projector cannot be turned on and the WARNING indicator still lights red, unplug the AC power cord and contact the service station. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER AN ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. Maintenance and Cleaning Top Control Top Control Note: The WARNING indicator continues to blink even after the temperature inside the projector returns to normal. When the projector is turned on again, the WARNING indicator stops blinking. Then check the matters below: – Did you provide appropriate space for the projector to be ventilated? Check the installing condition to see if the air vents of the projector are not blocked. – Has the projector been installed near an Air-Conditioning/ Heating Duct or Vent? Move the installation of the projector away from the duct or vent. – Is the filter clean? Clean the filter periodically. WARNING blinking red WARNING lights red
59 Maintenance and Cleaning Turn off the projector, and unplug the AC power cord from the AC outlet. Remove the front air filter by pulling the latch horizontally. Remove the back air filter by pulling the latch horizontally and then remove it leftward. 1 2 Filter prevents dust from accumulating on the optical elements inside the projector. Should the filters become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector. If a “Filter warning” icon appears on the screen, clean the filters immediately. Clean the filters by following the steps below. Clean the air filters with a brush or rinse them softly.3 When cleaning the air filters by rinsing, dry it well. Replace the air filters properly. Make sure that the air filters are fully inserted. 4 CAUTION Do not operate the projector with the filters removed. Dust may accumulate on the optical elements degrading picture quality. Do not put anything into the air vents. Doing so may result in malfunction of the projector. RECOMMENDATION we recommend avoiding dusty/smoky environments when you operate the projector . Usage in these environments may cause poor image quality . When using the projector under dusty or smoky conditions, dust may accumulate on a lens, LCD panels, or optical elements inside the projector degrading the quality of a projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning. Be sure to reset the Filter counter after cleaning or replacing the filters. Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Setting and then press the Point ► or the SELECT button. Use the Point ▲▼ buttons to select Filter counter and then press the Point ► or the SELECT button. Use the Point ▲▼buttons to select Filter counter reset and then press the SELECT button. Filter counter Reset? appears. Select yes to continue. 1 2 Resetting the Filter Counter Filter counter Filter counter Reset? appears. Select yes, then another confirmation box appears. Select yes again to reset the Filter counter. Another confirmation dialog box appears, select yes to reset the Filter counter.3 Cleaning the Filters Air filter (front) Pull horizontally and remove. Air filter (back) Pull horizontally and then remove it leftward. Note: Please be sure to fit this edge when inserting this filter.
60 Maintenance and Cleaning Cleaning the Projector CabinetCleaning the Projection Lens Unplug the AC power cord before cleaning. Gently wipe the projection lens with a cleaning cloth that c o n t a i n s a s m a l l a m o u n t o f n o n - a b r a s i v e c a m e r a l e n s c l e a n e r, o r u s e a l e n s c l e a n i n g p a p e r o r c o m m e r c i a l l y available air blower to clean the lens. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the lens. Unplug the AC power cord before cleaning. Gently wipe the projector body with a soft dry cleaning cloth. When the cabinet is heavily soiled, use a small amount of mild detergent and finish with a soft dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the cabinet. W h e n t h e p r o j e c t o r i s n o t i n u s e , p u t t h e p r o j e c t o r i n an appropriate carrying case to protect it from dust and scratches. When moving this projector or while not using it over an extended period of time, replace the lens cap. Attach the lens cap according to the following procedures. Attaching the Lens Cap 1 2 Thread the string through the hole on the lens cap and then tie a knot in the string to secure it in place. To pass the other end of the string into the hole on the bottom of the projector and pull at it.