Eiki Lc-Xbl20 Multimedia Projector Owners Manual

Multimedia  Projector 
MODEL LC-XBL20
           LC-XBL25
Owner’s Manual
  Network Supported 
□		 Wired	LAN
	 	 	 	100-Base-TX/10-Base-T
Refer	to	the	Owner's	Manuals	below	for	
details	about	network	function.
□			Network	Set-up	and	Operation
□			PJ	Network	Manager 

2
Features and Design
This	Multimedia	Projector	is	designed	with	the	most	advanced	technology	for	portability,	durability,	and	ease	of	use.	
This	projector	utilizes	built-in	multimedia	features,	a	palette	of	16.77	million	colors,	and	matrix	liquid	crystal	display	
(LCD)	technology.
♦ Compact Design
	 This	projector	 is	designed 	compact	 in	size	 and	weight.	
It	is	 easy	 to	carry	 and	installed	 anywhere	 you	wish	 to	
use.
♦ Simple Computer System Setting
	 The	 projector	 has	the	Multi-scan	 system	to...

3
Table of Contents
Trademarks
Each	name 	of 	corporations 	or 	products 	in 	this 	book 	is 	either 	a 	registered 	trademark 	or 	a 	trademark 	of 	its 	respective	
corporation.
Features and Design   . . . . . . . . . . . . . . . . . . .2
Table of Contents
 . . . . . . . . . . . . . . . . . . . . . .3
To the Owner
 . . . . . . . . . . . . . . . . . . . . . . . . . .4
Safety Instructions
 . . . . . . . . . . . . . . . . . . . . .5
Air	Circulation	 6
Installing	the	Projector	in	Proper	Position	 6
Moving...

4
To the Owner
CAUTION:     TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR 
BACK) . NO USER-SERVICEABLE PARTS 
INSIDE EXCEPT LAMP REPLACEMENT  . 
REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL .
THIS	SYMBOL	INDICATES	THAT	DANGEROUS	VOLTAGE	CONSTITUTING	 A	RISK	OF	ELECTRIC	SHOCK	IS	PRESENT 	WITHIN	THIS	UNIT.
THIS	SYMBOL 	INDICATES	THAT	THERE	 ARE	IMPORTANT 	OPERATING	 AND	MAINTENANCE	INSTRUCTIONS	IN	 THE	OWNER'S	MANUAL 	WITH	THIS	UNIT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Before...

5
Safety Instructions
All	the	 safety	 and	operating	 instructions	 should	be	read	
before	the	product	is	operated.
Read	 all	of	the	 instructions	 given	here	and	retain	 them	
for	later	 use.	Unplug	 this	projector	 from	AC	power	 supply	
before	 cleaning.	 Do	not	 use	 liquid	 or	aerosol	 cleaners.	
Use	a	damp	cloth	for	cleaning.
F o l l o w	a l l 	w a r n i n g s 	a n d 	i n s t r u c t i o n s 	m a r k e d 	o n 	t h e	
projector.
For	 added	 protection	 to	the	 projector	 during	a	lightning	
storm,...

6
Safety Instructions
Openings	in	the	 cabinet	 are	provided	 for	ventilation.	 To	
ensure	reliable	operation	 of	the	 product	 and	to	protect	 it	
from	overheating,	 these	openings	 must	not	be	blocked	
or	covered.	
	CAUTION
Hot	 air	is	exhausted	 from	the	exhaust	 vent.	When	 using	
or	installing 	the 	projector, 	the 	following 	precautions	
should	be	taken.	
–	Do	 not	put	any	 flammable	 object	or	spray	 can	near	 the	
projector,	hot	air	is	exhausted	from	the	air	vents.
–	Keep	the	exhaust	vent	at...

7
Safety InstructionsCompliance
Federal Communications Commission Notice
Note:	This	equipment	 has	been	 tested	 and	found	 to	comply	 with	the	limits	 for	a	Class	 B	digital	 device,	 pursuant	
to	Part	 15	of	the	 FCC	 Rules.	 These	limits	are	designed	 to	provide	 reasonable	 protection	against	harmful	
interference	 in	a	residential	 installation.	 This	equipment	 generates,	 uses,	and	can	radiate	 radio	frequency	
energy,	 and	if	not	 installed	 and	used	 in	accordance	 with	the	instructions,	 may...

8
Part Names and Functions
⑤⑦⑧
③②
FrontBack
⑥
①	 Top controls and Indicators
②	 Zoom Ring
③	 Focus Ring
④	 Speaker
⑤
  Infrared Remote Receiver
⑥	 Projection Lens
⑦	 Lens Cap
	 (See	page	60	for	attaching.)
⑧	Air Intake Vent
⑨	 Lamp Cover
⑩	 Terminals and Connectors
⑪	 LAN Connection Terminal
⑫ Power Cord Connector
⑬ Exhaust Vents
CAUTION
Hot	air	is	exhausted	from	the	exhaust	vent.	Do	not	put	heat-sensitive	objects	near	this	side.
⑭	Filters
⑮	 Adjustable Foot
Note:
⑪
	LAN	Connection	 Terminal	is	for	the...

9
Part Names and Functions
Rear Terminal 
②③①④⑥
⑦⑤
⑦	AUDIO IN
	 Connect	the	audio	output	signal	from	computer	or	
video	equipment	to	this	jack	(pp.14-16).
⑤	VIDEO IN
	 Connect	the	composite	video	output	signal	to	this	
jack	(p.15).
②	COMPUTER IN 1 /S-VIDEO IN / COMPONENT IN
	 Connect	analog	RGB	output	signal	from	a	
computer,	S-VIDEO	output	signal	from	video	
equipment,	or	RGB	scart	21-pin	video	output	or	
component	video	output	to	this	terminal	(pp.14-16).
④	AUDIO OUT (VARIABLE)
	 Connect	an	external...

10
Part Names and Functions
Top Control
⑦	LAMP REPLACE indicator
	 Lights	yellow	when	the	projection	lamp	reaches	its	
end	of	life	(pp.61,	69).
⑧	w ARNING indicator
	 –	Lights	red	when	the	projector	detects	an	
abnormal	condition.	
	 –	Blinks	red	when	the	internal	temperature	of	the	
projector	exceeds	the	operating	range	(pp.58,	
69).④	ON/STAND–By  button
Turn	the	projector	on	or	off	(pp.18-20).
⑤	POwER indicator
	 –	Lights	red	when	the	projector	is	in	stand-by	mode.
	 –	Lights	green	during	operations....