Eiki Lc-Xbl20 Multimedia Projector Owners Manual

31
Computer Input
Store
To	store	the	adjusted	data,	select Store and	then	press	the	
Point	►	or	the	SELECT	button.	Move	the	highlight	to	one	of	
the	Modes	1	to	5	in	which	you	want	to	store,	and	then	press	
the	SELECT	button.
Mode free
To	clear	the	stored	data,	select	Mode free	and	then	press	
the	Point	►	or	the	SELECT 	button.	Move	the	highlight	to	the	
Mode	that	you	want	to	clear	and	then	press	the	SELECT 	
button.
Note:
	 •	 Display  area  (H/V) 
cannot	 be	selected	 when	480i,	575i,	480p,	575p,	720p,...

32
Computer Input
Image select Menu
IMAGE button
Dynamic
Real
Image 1
Image 2
Image 3
Image Mode Selection 
Image 4
Blackboard(Green)
Standard
Remote Control
IMAGE button
Select	the	desired	image	mode	 among	Dynamic,	Standard,	
Real,	Blackboard (Green),	Colorboard,	Image 1,	Image 2,	
Image 3	and	Image 4	by	 pressing	 the	IMAGE	 button	on	the	
remote	control.
Standard
Picture	mode	with	improved	halftone	for	graphics.
Real
Blackboard (Green)
Image 1–4
For	the	image	projected	on	a	blackboard.
This	mode...

33
Computer Input
Image Adjust Menu
Image Adjustment
Reset
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	▲▼	buttons	to	select	Image 
adjust
	and	then	press	the	Point	►or	the	SELECT 	
button.
1
2Use	the	Point	▲▼	buttons	select	the	desired	item	
and	then	press	the	SELECT 	button	to	display	the	
adjustment	dialog	box.	Use	the	Point	◄►	buttons	to	
adjust	the	setting	value.
Note:
•	When	White	balance Red,	Green	or	Blue	is		
		adjusted,	Color temp .	will	change	to	User.
•	When...

34
Computer Input
Store
This	projector	has	the	picture	screen	resize	function,	which	
enables	you	to	customize	the	image	size.Screen Menu
Screen Size Adjustment
Provide	the	image	to	fit	the	screen	size.
Normal
True
Provide	the	image	in	its	original	size.	When	the	original		
image	size	is	larger	or	smaller	than	the	screen	size	
(1024	x		768),	the	projector	enters	to	the	panning		mode		
automatically.	Use	the	Point	▲▼◄►	buttons	to	pan	the	
image.	When	adjusted,	the	arrows	will	turn	red.	When	
reached	to...

35
Computer Input
Select	Digital zoom +.	The	 On-Screen	 Menu	disappears	 and	
D . zoom +	appears.	 Press	the	SELECT 	button	 to	expand	 the	
image	size.	Use	the	Point	▲▼ ◄►	buttons	 to	pan	 the	image.	
The	Panning	function	can	work	only	when	the	image	is	larger	
than	the	screen	size.
A	projected 	image 	can 	be 	also 	expanded 	by 	pressing 	the	
D.ZOOM	▲	or	the	SELECT 	button	on	the	remote	control.	
To	exit	the	Digital	zoom	+/–	mode,	press	any	button	except	
the	D.ZOOM	▲▼	buttons,	SELECT 	and	Point...

36
Choose	Video	or	S-video	by 	pressing 	the 	VIDEO 	or 	the	
S-VIDEO	button	on	the	remote	control.
Before	 using	these	 buttons,	 correct	input	source	 should	be	
selected	through	menu	operation	as	described	below.
1
2
Input Menu
Input Source Selection (Video, S-video)
Video Input
Direct Operation
Menu Operation
When	video 	input 	signal 	is 	connected 	to 	the	
VIDEO	jack,	select	Video.Video
When	 video	input	signal	 is	connected	 to	the	 S-
VIDEO	jack,	select	S-video.S-video
Note:
	 	 When	 the	Input...

37
Video Input
Choose	Computer 1(Component)	or	Computer 1(Scart) by	pressing	the	COMPONENT	or	the	COMPUTER	1	
button	on	the	remote	control.
Before	using	these	buttons,	correct	input	source	should	be	selected	through	Menu	operation	as	described	
below.
1
Input Menu
2Use	the	Point	▲▼	buttons	to	select	Computer 1	and	
then	press	the	Point	►	button.
Input Source Selection (Component, RGB Scart 21-pin)
When	the	input	source	is	coming	from	video	
equipment	connected	to	the	COMPUTER	
IN	1/S-VIDEO	IN/COMPONENT...

38
Video Input
Video System Selection
1AV System Menu (Video or S-video)
AV System Menu (Component)
2
If 	the 	projector 	cannot 	reproduce 	proper 	video 	image,	
select	 a	specific	 broadcast	 signal	format	 from	among	PA L,	
SECAM,	NTSC,	NTSC 4 .43,	PAL-M,	and	PAL-N.
PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N
The	projector 	automatically 	detects 	an 	incoming 	video	
signal,	and	adjusts	itself	to	optimize	its	performance.
If	the	projector	cannot	reproduce	proper	video	image,	select	
a	specific	component...

39
Video Input
Image select Menu
Select	the	desired	image	mode	 among	Dynamic,	Standard,	
Cinema,	Blackboard (Green),	Colorboard,	Image 1,	
Image 2,	Image 3	and	Image 4	by	pressing	the	IMAGE	
button	on	the	remote	control.
Standard
Picture	mode	adjusted	with	fine	tone.
Cinema
Blackboard (Green)
Image 1–4
IMAGE button
Dynamic
Cinema
Image Mode Selection 
For	the	image	projected	on	a	blackboard.
This	mode	help	enhance	the	image	projected	on	a	
blackboard.	 This	is	mainly	effective	on	a	green	colored	
board,...

40
Video Input
Image Adjustment
1
2
Press	the	Point	◄	button	to	decrease	the	contrast;	press	the	
Point	►	button	to	increase	the	contrast	(from	0	to	63).
Press	the	Point	◄	button	to	decrease	the	brightness;	press		
the	Point	►	button	to	increase	the	brightness	(from	0	to	63).
Contrast
Brightness
Press	the	Point	◄	button	to	lighten	red	tone;	press	the	Point	
►	button	to	deepen	red	tone	(from	0	to	63).
white balance (Red)
Press	the	Point 	◄	button 	to 	lighten 	green 	tone; 	press 	the	
Point	►	button	to...