Eiki Lc-Xb42n Multimedia Projector Owners Manual
Have a look at the manual Eiki Lc-Xb42n Multimedia Projector Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 66
66
wARNING :
High voltages are used to operate this projector . Do not attempt to open the cabinet .
If problems still persist after following all operating instructions, co\
ntact the dealer where you purchased the
projector or the service center. Specify the model number and explain about the problem. We will advise you
how to obtain service.
This symbol on the nameplate
m e a n s t h e p r o d u c t i s L i s t e d
by Underwriters Laboratories
I n c . I t i s d e s i g n e d a...](http://img.usermanuals.tech/thumb/1702/88937/w64_eiki-lc-xb42n-manual_d-65.png "Page 66
66
wARNING :
High voltages are used to operate this projector . Do not attempt to open the cabinet .
If problems still persist after following all operating instructions, co\
ntact the dealer where you purchased the
projector or the service center. Specify the model number and explain about the problem. We will advise you
how to obtain service.
This symbol on the nameplate
m e a n s t h e p r o d u c t i s L i s t e d
by Underwriters Laboratories
I n c . I t i s d e s i g n e d a...")
![Page 69
69
Check the indicators for projector condition. \
• • • green.• • • red• • • off
• • • blinks green.
When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator
lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement counter after
replacing the lamp. See pages 61-62.
The projector is off. (The AC power cord is unplugged.)
The projector is in stand-by mode....](http://img.usermanuals.tech/thumb/1702/88937/w64_eiki-lc-xb42n-manual_d-68.png "Page 69
69
Check the indicators for projector condition. \
• • • green.• • • red• • • off
• • • blinks green.
When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator
lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement counter after
replacing the lamp. See pages 61-62.
The projector is off. (The AC power cord is unplugged.)
The projector is in stand-by mode....")
![Page 70
70
AppendixCompatible Computer Specifications
Basically this projector can accept the signal from all computers with t\
he V-, H-Frequency mentioned below
and less than 140 MHz of Dot Clock for analog signal and 110 MHz of Dot Clock for digital signal. When selecting these modes, PC adjustment can be limited.
ON-SCREEN
DISPLA yRESOLUTIONH-Freq .
(KHz)V-Freq . (Hz)
VGA 1640 x 48031.4759.88
VGA 2720 x 40031.4770.09
VGA 3640 x 40031.4770.09
VGA 4640 x 48037.8674.38
VGA 5640 x 48037.8672.81
VGA 6640 x...](http://img.usermanuals.tech/thumb/1702/88937/w64_eiki-lc-xb42n-manual_d-69.png "Page 70
70
AppendixCompatible Computer Specifications
Basically this projector can accept the signal from all computers with t\
he V-, H-Frequency mentioned below
and less than 140 MHz of Dot Clock for analog signal and 110 MHz of Dot Clock for digital signal. When selecting these modes, PC adjustment can be limited.
ON-SCREEN
DISPLA yRESOLUTIONH-Freq .
(KHz)V-Freq . (Hz)
VGA 1640 x 48031.4759.88
VGA 2720 x 40031.4770.09
VGA 3640 x 40031.4770.09
VGA 4640 x 48037.8674.38
VGA 5640 x 48037.8672.81
VGA 6640 x...")
![Page 73
7
Appendix
Model No.
COMPONENT~VGA Cable : AH-98771
SCART~VGA Cable : AH-98881
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model No.
to the sales dealer.
Optional Parts
Accessories
Owner’s Manual (CD-ROM)
Quick Reference Guide
AC Power Cord
Remote Control and Batteries
VGA Cable
Serial Control Cable
PIN Code Label
Network Application...](http://img.usermanuals.tech/thumb/1702/88937/w64_eiki-lc-xb42n-manual_d-72.png "Page 73
7
Appendix
Model No.
COMPONENT~VGA Cable : AH-98771
SCART~VGA Cable : AH-98881
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model No.
to the sales dealer.
Optional Parts
Accessories
Owner’s Manual (CD-ROM)
Quick Reference Guide
AC Power Cord
Remote Control and Batteries
VGA Cable
Serial Control Cable
PIN Code Label
Network Application...")
![Page 74
74
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information
System Industries Association). This projector supports all commands defined by PJLink Class 1 and is ve\
rified
conformance with PJLink Standard Class 1.
For PJ Link password, see page 49 on the owner’s manual “Network Set-up and Operation.”
Projector Input
RGB
Computer1 (Analog)
RGB (AV HDCP)
RGB (PC digital)
Component
RGB (Scart)
Auto
PJLink Input
RGB 2
RGB 1
DIGITAL 2
DIGITAL 1
RGB 3
RGB 4...](http://img.usermanuals.tech/thumb/1702/88937/w64_eiki-lc-xb42n-manual_d-73.png "Page 74
74
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information
System Industries Association). This projector supports all commands defined by PJLink Class 1 and is ve\
rified
conformance with PJLink Standard Class 1.
For PJ Link password, see page 49 on the owner’s manual “Network Set-up and Operation.”
Projector Input
RGB
Computer1 (Analog)
RGB (AV HDCP)
RGB (PC digital)
Component
RGB (Scart)
Auto
PJLink Input
RGB 2
RGB 1
DIGITAL 2
DIGITAL 1
RGB 3
RGB 4...")
![Page 76
76
Appendix
Write down the PIN code number in the column below and keep it with this \
manual securely. If you forgot or lost
the number and unable to operate the projector, contact the service station.
PIN Code Number Memo
Factory default set No: 1 2 3 4*
Factory default set No: 4 3 2 1*
Put the label below (supplied) on in a prominent place of the
projector's body while it is locked with a PIN code.
While the projector is locked with the PIN code.
PIN Code Lock No .
Logo PIN Code Lock No ....](http://img.usermanuals.tech/thumb/1702/88937/w64_eiki-lc-xb42n-manual_d-75.png "Page 76
76
Appendix
Write down the PIN code number in the column below and keep it with this \
manual securely. If you forgot or lost
the number and unable to operate the projector, contact the service station.
PIN Code Number Memo
Factory default set No: 1 2 3 4*
Factory default set No: 4 3 2 1*
Put the label below (supplied) on in a prominent place of the
projector's body while it is locked with a PIN code.
While the projector is locked with the PIN code.
PIN Code Lock No .
Logo PIN Code Lock No ....")
71 Appendix ON-SCREEN DISPLA yRESOLUTIONH-Freq . (KHz)V-Freq . (Hz) D-VGA640 x 48031.4759.94 D-480p640 x 48031.4759.88 D-575p768 x 57531.2550.00 D-SVGA800 x 60037.87960.32 D-WXGA 11366 x 76848.3660.00 ON-SCREEN DISPLA yRESOLUTIONH-Freq . (KHz)V-Freq . (Hz) D-720p1280 x 72037.5050.00 D-1035i1920 x 1035 D-1080i1920 x 1080 D-1080i1920 x 1080 33.7560.00 (Interlace) 33.7560.00 (Interlace) 28.12550.00 (Interlace) D-XGA1024 x 76843.36360.00 D-WXGA 21360 x 76847.760.00 D-WXGA 31376 x 76848.3660.00 When the input signal is digital from DVI terminal, refer to the chart b\ elow. Note: • When the input signal is D-SXGA 1, D-SXGA 2, D-SXGA 3, or D-SXGA+1, images may not be displayed properly depending on computers. • The specifications are subject to change without notice. D-WXGA 41360 x 76856.16072.000 D-WXGA 51366 x 76846.50050.000 D-WXGA 61280 x 76847.77659.870 D-WXGA 71280 x 76860.28974.893 D-SXGA11280 x 102463.9860.02 D-SXGA21280 x 102460.27658.069 D-SXGA+11400 x 105063.9760.19 D-720p1280 x 72045.0060.00 D-SXGA31280 x 102431.6529.8
72
AppendixTechnical Specifications
Mechanical Information
Projector Type Multi-media Projector
Dimensions (W x H x D) 334 mm x 78 mm x 262 mm (Not including adjustable feet)
Net Weight
3.7 kg
Feet Adjustment
0˚ to 8.9˚
Panel Resolution
LCD Panel System 0.8” TFT Active Matrix type, 3 panels
Panel Resolution 1,024 x 768 dots
Number of Pixels 2,359,296 (1,024 x 768 x
3 panels)
Signal Compatibility
Color System PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
High Definition TV Signal 480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
Scanning Frequency H-sync. 15 kHz–100 kHz, V-sync. 50–100 Hz
Optical Information
Projection Image Size (Diagonal) Adjustable from 40” to 300”
Throw Distance 3.1' (0.93m) - 37.6' (1
1.47m)
Projection Lens F1.7–2.5 lens with f=19.2 mm–30.2 mm with manual zoom and focus
Projection Lamp 275 W
Interface
Video Input Jack RCA Type x 1
S-video Input Jack Mini DIN 4 pin x 1
Audio Input Jacks RCA
Type x 2
Computer Input 1/DVI-I Input T
erminal DVI-I Terminal X 1
Computer Input 2/Component Input T
erminal Mini D-sub 15 pin X 1
Monitor Output Terminal Mini D-sub 15 pin x 1
Computer/Component Audio Input Jack
Mini Jack (stereo) x 1
Service Port Connector Mini DIN 8 pin x 1
USB Connector USB Series B connector
x 1
Audio Output Jack Mini Jack (stereo) x 1 (variable)
LAN Connection Terminal 100 Base-TX (100Mbps)/10 Base-T (10Mbps), RJ45
SD Card Slot
Audio
Internal Audio Amp 1.0 W RMS
Built-in Speaker 1 speaker
, ø28 mm
Power
Voltage and Power Consumption AC 100–120 V (4.0A Max. Ampere), 50/60 Hz (The U.S.A and Canada)
AC 200–240 V (2.0A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.)
Operating Environment
Operating Temperature 41˚F–95˚F (5 ˚C–35 ˚C)
Storage T
emperature 14˚F–140˚F (-10˚C–60 ˚C)
Remote Control
Battery AAA or LR03 Type x 2
Operating Range 5 m/±30˚
Dimensions 45 mm (W) x 23 mm (H) x 145 mm (D)
Net Weight 99 g (including batteries)
Laser Pointer
Class II Laser (Max. Output: 1 mW/Wave length: 640–660 nm)
7
Appendix
Model No.
COMPONENT~VGA Cable : AH-98771
SCART~VGA Cable : AH-98881
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model No.
to the sales dealer.
Optional Parts
Accessories
Owner’s Manual (CD-ROM)
Quick Reference Guide
AC Power Cord
Remote Control and Batteries
VGA Cable
Serial Control Cable
PIN Code Label
Network Application (CD-ROM)
Soft Carrying Case
Remote Control Cable
● The specifications are subject to change without notice.
● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are
effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD
panels.
74 This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is ve\ rified conformance with PJLink Standard Class 1. For PJ Link password, see page 49 on the owner’s manual “Network Set-up and Operation.” Projector Input RGB Computer1 (Analog) RGB (AV HDCP) RGB (PC digital) Component RGB (Scart) Auto PJLink Input RGB 2 RGB 1 DIGITAL 2 DIGITAL 1 RGB 3 RGB 4 Video S-video VIDEO 2 VIDEO 3 VIDEO 1 NETWORK 1Wired Computer1 (Digital) Computer2 Video PJLink is a registered trademark of JBMIA and pending trademark in some countries. Pj Link Notice WirelessNETWORK 2 Parameter 12 11 32 31 13 14 22 23 21 51 52 Appendix
75 Terminal : Mini DIN 8-PIN SERVICE PORT CONNECTOR Vcc - Data + Data Ground 1 2 4 2 3 4 1 COMPUTER IN 2 /COMPONENT IN /MONITOR OUT (ANALOG) Terminal: Analog RGB (Mini D-sub 15 pin) 512341096781514131112 Configurations of Terminals RX – TX + TX – RX + 2 4 8 7 6 5 4 3 2 1 5 6 7 8 1 USB CONNECTOR (Series B) LAN TERMINAL ----- ----- ---------- DVI-I TERMINAL (DIGITAL/ANALOG) 1917 21018 31119 41220 51321 61422 71523 81624 C1 C2 C3 C5 C4 T.M.D.S. Data2– No Connect T.M.D.S. Data2+ No Connect T.M.D.S. Data2 Shield DDC Clock DDC Data No connect 1 5 2 4 6 7 8 T.M.D.S. Data1– No Connect T.M.D.S. Data1+ No Connect T.M.D.S. Data1 Shield +5V Power Ground (for +5V) Hot Plug Detect 9 1 10 12 11 14 15 16 T.M.D.S. Data0– No Connect T.M.D.S. Data0+ No Connect T.M.D.S. Data0 Shield T.M.D.S. Clock Shield T.M.D.S. Clock+ T.M.D.S. Clock– 17 21 18 20 19 22 2 24 Analog Red Input Analog Ground (R/G/B) Analog Green Input Analog Horiz. sync Analog Blue Input C1 C5 C2 C4 C 12345876 Appendix Red (R/Cr) Input/ R Output Ground (Horiz.sync.) Green (G/Y) Input/ G Output ----- Blue (B/Cb) Input/ B Output Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 6 7 8 +5V Power / --- Horiz. sync. Input (Composite H/V sync.) Ground (Vert.sync.) DDC Data / --- Ground Vert. sync. DDC Clock / --- 9 1 10 12 11 14 15 R X D ----- ----- GND ----- ----- ----- 1 2 4 5 6 7 8 T X D
76 Appendix Write down the PIN code number in the column below and keep it with this \ manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Number Memo Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* Put the label below (supplied) on in a prominent place of the projector's body while it is locked with a PIN code. While the projector is locked with the PIN code. PIN Code Lock No . Logo PIN Code Lock No . *Should the four-digit number be changed, the factory set number will be invalid. Appendix
77 Appendix Dimensions 10.3 (262) 13.15(334) 2.0(51.3) 3.17(80.5) 5.1(129.0)5.2(132.0) 2.8(70.5) 5.1(129.0)4.4(112.5) 5.5(140.0) 3.1(78)3.6(91.3) Unit: inch(mm) Screw Holes for Ceiling Mount Screw: M4 Depth: 0.472(12.0)
KF3BC
EIKI CZECH spol. s.r.o.Umelecká 15
170 00 Praha 7
Czech Republic
Tel : +42 02 20570024
+42 02 20571413
Fax : +42 02 2057141
1
E-Mail : [email protected]
ˇ
U .S .A .EIKI International, Inc.
30251 Esperanza
Rancho Santa Margarita
CA 92688-2132 U.S.A.
Tel: 800-242-3454 (949)-457-0200
Fax: 800-457-3454 (949)-457-7878
E-Mail : [email protected]
Deutschland & ÖsterreichEIKI Deutschland GmbH Am Frauwald
12 65510 Idstein
Deutschland
Tel: 06126-9371-0
Fax: 06126-9371-14
E-Mail : [email protected]
Eastern Europe
japan & w orldwideEIKI Industrial Company Limited.
4-12 Banzai-Cho, Kita-Ku, Osaka,
530-0028 Japan
Tel : +81-6-6311-9479
Fax : +81-6-6311-8486
worldw ide website http://www .eiki .com
Canada
©2008 Eiki International, Inc.
ChinaEIKI (Shanghai) Co.,LTD
1.Dapu Road, Golden Magnolia
Plaza #2109 Shanghai,
200023 China
Tel : 86-21-5396-0088
Fax : 86-21-5396-0318
E-Mail : [email protected]
EIKI CANADA - Eiki International, Inc.
P.O. Box 156, 310 First St. - Unit 2,
Midland, ON, L4R 4K8, Canada
Tel : 800-563-3454 (705)-527-4084
Fax : 800-567-4069 (705)-527-4087
E-Mail : [email protected]