Eiki Lc-Xb41n Multimedia Projector Owners Manual

51
Setting
Ceiling 
Rear 
Ceiling
When this function is set to “On,” the picture will be
top/bottom and left/right reversed. This function is used to
project the image from a ceiling-mounted projector.Rear
When this function is set to “On,” the picture will be
left/right reversed. This function is used to project the
image from rear of the screen.
Input search
This function detects the input signal automatically. When a
signal is found, the search will stop. Use the Point 
7 8
buttons to select one of...

52
Setting
Power management
Time left before Lamp is off.
Pow er management
For reducing power consumption as well as maintaining the
lamp life, the Power management function turns off the
projection lamp when the projector is not operated for a
certain period.
If the input signal is interrupted and no button is pressed for
more than 30 seconds, the timer display with “No signal”
appears. It starts the countdown until the lamp is turned off.
Use the Point 
7 8buttons to set the countdown timer.
Select...

53
Setting
On start
Lamp control
Remote control
Remote control
Pointer
When this function is set to “On,” the projector will be
automatically turned on just by connecting the AC power
cord to a wall outlet.
✔Note:
• Be sure to turn off the projector properly (see “Turning Off the
Projector” on page 23). If the projector is turned off in the incorr\
ect
sequence, the On start function does not work properly.
This function allows you to change brightness of the screen.
Auto ........... The brightness...

54
Setting
Key lock
Key lockSecurity (Key lock, PIN code lock, Alarm settings)
PIN code lock
PIN code lock
This function locks the top control and remote control
buttons to prevent operation by unauthorized persons. ...... Unlocked.
...... Lock the operation of the top control. Tounlock, use the remote control.
...... lock the operation of the remote control. To unlock, use the top control.
If the top control accidentally becomes locked and you
do not have the remote control nearby or there is
something...

55
Setting
Change the PIN code lock setting
Use the Point 7 8buttons to
switch between the options.Use the Point 7 8button to select Off, On1, or On2 and
then move the pointer to “Quit” with the Point 
dbutton.
Press the SELECT button to close the dialog box.
Change the PIN code lock setting Enter a PIN code
Use the Point edbuttons to enter a number. Press the
Point 
8button to fix the number and move the red frame
pointer to the next box. The number changes to “ ✳.” If
you fixed an incorrect number, use...

56
This function provides the following options in the cooling
fans’ operation when the projector is turned off (p.23).L1 ....... Normal operation
L2 ....... Slower and lower-sound than the normal operation (L1), but it takes more time to cool the projector
down.
Fan
Setting
Choose the running speed of cooling fans from the following
options.
Normal ..... Normal speed
Max .......... Faster than the normal speed. Fan control
Fan
Warning log
This function records anomalous operations while the
projector is...

57
Setting
Factory default
This function returns all setting values except for the user
logo, PIN code lock, Logo PIN code lock, lamp counter,
Antitheft alarm function when it is set on and filter counter
to the factory default settings.
Exit the Setting Menu.
Quit
Select Factory default and this
box appears. Select [Yes], and
the next box appears. Select [Yes] to
activate it.
Factory default
This function is used to set a frequency for the filter cleaning.
When the projector reached a specified time...

58
How to Use the Antitheft Alarm Function
Antitheft alarm function is provided to prevent the projector from being\
 stolen. When this function is set to
“On,” the alarm rings as an unauthorized person tries to move the \
projector.
To activate the Alarm function for the first time after purchase, you mu\
st turn on the power once. 
Press the F button three times to turn the alarm function on.
The ALARM indicator blinks for a few seconds and the
projector enters the warning mode. (If the battery is not...

59
Antitheft Alarm Function
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE, WRITE DOWN
THE NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO
ON PAGE 78, AND KEEP IT SECURELY. IF YOU FORGET YOUR
PIN CODE, SOME SETTINGS OF THE ANTITHEFT ALARM
FUNCTION CAN NO LONGER BE CHANGED.
Change the PINcode 
Press the F button and enter the four-digit PIN code
number within about 10 seconds. The ALARM indicator
blinks red for a few seconds and a high-pitched
confirmation sound is produced.  
Other settings
Reset the...

60
Antitheft Alarm Function
Charge the built-in batteries
Set the Battery charge option in the Alarm setting menu to
“Auto.” The default setting is “Auto.”
As long as the AC power cord is connected and this option is
set to “Auto,” the built-in battery for Alarm function is being
charged at all times. While charging the battery, “Charging”
is displayed in the menu. 
The “Charging”appears dimmed when the battery is fully
charged or the Battery charge option is set to“Off,” or if
charging malfunction...