Eiki Eip-3000n Dlp Projector Owners Manual

7
15. OverloadingDo not overload wall outlets, extension cords, or
integral convenience receptacles as this can
result in a risk of fire or electric shock.
16. Object and Liquid EntryNever push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any
kind on the product.
17. ServicingDo not attempt to service this product yourself as
opening or removing covers may expose...

8Observe the following safeguards when setting up your
projector.
Caution concerning the lamp unit

Potential hazard of glass par-
ticles if lamp ruptures. In
case of lamp rupture, contact
your nearest EIKI Authorized
Dealer or Service Center for
replacement.
See “Replacing the Lamp” on
page 55.
Caution concerning the setup of the pro-
jector

For minimal servicing and to maintain high
image quality, EIKI recommends that this pro-
jector be installed in an area free from hu-
midity, dust and cigarette...

9

When turning off the projector, the cooling fan
runs to decrease the internal temperature for
a while. Unplug the power cord after the cool-
ing fan stops. The period the cooling fan runs
will vary, depending on the circumstances and
the internal temperature.
Caution regarding usage of the projector

When using the projector, be sure not to sub-
ject it to hard impact and/or vibration, as this
can result in damage. Take extra care with
the lens. Before moving the projector, be sure
to unplug the power...

10
PDF owner’s manuals in several languages are included in the CD-ROM. To utilize
these manuals, you need to install Adobe® Reader® on your computer (Windows®
or Macintosh®).
Please download Adobe
® Reader® from the Internet (http://www.adobe.com).
Accessing the PDF Manuals
How to Access the PDF Owner’s Manuals
• If the desired pdf file cannot be opened by double clicking the mouse, start Adobe® Reader® first,
then specify the desired file using the “File”, “Open” menu.
Note
For Windows®:
1 Inser t the...

11
Accessories
Remote controlTwo R-6 batteries
 (“AA” size, UM/SUM-3, HP-7 or similar)
Power cord* RGB cable
(10 ' (3.0 m))
QCNWGA045WJPZ
• Quick Guide
• Owner’s manual (this manual and CD-ROM)
Optional accessory

 Lamp unitAH-66271
Supplied accessories
For U.S. and
Canada, etc. (6 ' (1.8 m))
QACCDA007WJPZ For Europe,
except U.K. (6 ' (1.8 m))
QACCVA011WJPZ
(1) (2)
* Use the power cord that corresponds to the wall outlet in your country. Lens cap (attached)
DIN-D-sub RS-232C adaptor (5...

12
33
40
53
32
32
30
31
52
30
15
28, 53
40, 51
29, 53
28, 29
40
Top View
STANDBY-
ON button
For turning the
power on and
putting the
projector into
standby mode.
Lamp indicator
Temperature warning
indicator
Adjustment buttons
(P/R/O/Q)
For selecting menu items.Volume buttons
(–O/Q+)
For adjusting the speaker
sound level.
ENTER button
For setting
items selected
or adjusted on
the menu.
MENU/HELP button
For displaying
adjustment and
setting screens, and
help screen.
Front View
Focus ring
For adjusting
the...

13
25
52
31
26
25
2524
23
24
2527
21
23
24
27
24
46
52
Numbers in Z refer to the main pages in this owner’s manual where the topic is
explained.
Terminals
Rear View
Refer to “INPUT Terminals and Connectable Main Equipment” on page 21.
AUDIO (INPUT
3, 4) terminal
(Shared for
INPUT 3 and 4) INPUT 3 terminal
Terminal for connect-
ing video equipment
with an S-video
terminal.
INPUT 4 terminal
Terminal for
connecting video
equipment.
Speaker
Rear adjustment
footKensington Security
Standard connector
AC...

14
33
40
36
32
36
32
40
51
2928
40
36
40
32
36
34
Numbers in Z refer to the main pages in this owner’s manual where the topic is
explained.
STANDBY button
For putting the
projector into the
standby mode.
KEYSTONE button
For entering the
Keystone Correction
mode.
RETURN button
For returning to the
previous menu screen
during menu operations.
BREAK TIMER
button
For displaying the
break time.
AV MUTE button
For temporarily
displaying a black
screen and turning
off the sound.
PICTURE MODE
button
For...

15
• Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
• Insert the batteries making sure the polarities correctly match the m and n marks inside the battery
compartment.
• Batteries of different types have different properties, therefore do not mix batteries of different types.
• Do not mix new and old batteries.
This may shorten the life of new batteries or may cause old batteries to leak.
• Remove the batteries from the remote control once they have...

16
Quick Start
This section shows the basic operation (projector connecting with the computer). For details, see
the page described below for each step.
Setup and Projection
In this section, connection of the projector and the computer is explained using one example.
When connecting equipment other than a computer, see
pages 24 and 25.
3. Remove the lens cap and turn the projector on 2. Connect the projector to the computer and plug the power cord
into the AC socket of the projector
On the projector On...