Eiki Eip-1 Multimedia Projector Owners Instruction Manual

10
3.4 Adjusting the focus and zoom 
 
 
 
 
 
 
 
You can zoom in or out the image with the zoom ring. To enlarge the image size, 
please turn the zoom ring counter-clockwise. To reduce the image size, please turn 
the zoom ring clockwise. To adjust the focus of the image, please turn the focus 
ring until the image becomes clear. The projection distance of the projector is 
1.45 – 10 meters. Zoom Ring 
Focus Ring  

11
3.5 Projected Image Size 
 
 
 
 
 
 
 
Projection Distance  1.45M 2.0M 4M  6M 10 M 
Tele Screen size  42”  49”  99”  148”  247” 
Wide Screen Size  48”  57”  113”  170”  283” 
 
 
 
 
 
 
 
  

12
4. How to use the projector 
This section covers the methods of using and adjusting the projector, as well as the 
methods of using the control panel, remote controller and menu. 
 
4.1 Initial image adjustment 
1  Please follow the previously stated steps to turn on the projector; and keep the 
projector facing the screen. 
2  Turn the zoom ring to adjust the size of the image. 
3  Turn the focus ring to adjust the focus of the image. 
4  Use the foot adjuster to adjust the altitude of the image. 
5...

13 LED Indicator 
y When the projector is turned on, the LED indicator flashes. Press the Power
key to display the mage. At this time, the LED indicator lights up 
consistently. 
y If the LED indicator flashes quickly, the projector is probably in an 
abnormal condition. Possible reasons include: 
a.  If the fan is in an abnormal condition, the message “Fan lock error 
occurred, Projector going shutdown!” appears on the screen. 
b.  If the temperature becomes abnormal, the message “Thermal error...

14
- Remote controller 
 
 
Key Functions 
Freeze/Esc/L y Press this key to freeze the image. Press again to clear 
the static image. 
y Press this key to quit the menu if the menu is on the 
screen. 
y In the remote-control mouse mode, this key works as 
the left key of mouse. 
Enter/R y Please check page 13 “Auto/Enter” of “Control panel” 
for the use of this key on the menu. 
y In the remote-control mouse mode, this key works as 
the right key of mouse. 
Power y Please refer to page 8 “Turning on/off...

15 Mode y Press this key and green LED indicator turns on. Then 
the remote controller can be used as a mouse. 
 Be sure to connect USB mouse cable to the 
computer and projector before using the remote   
controller as a mouse. 
Menu y Please refer to page 13 “Menu” of “Control panel”. 
Source y Select Analog RGB, Analog Y Pb Pr, Digital RGB, 
Composite Video, S-Video and Component Video 
signals in sequence. 
Blank y Convert the image into blank and fully blue. Press 
again to restore. 
Auto y Press...

16
5. Menu 
Press the Menu key to open the menu. You can press the up or down key to select 
the items on the menu; or press Esc to quit the menu. To enter the submenu, please 
press Enter key or right key. On the submenu, press the Menu or Esc key on the 
remote controller to return to the main menu; or press twice to quit menu. 
5.1 Image (VGA mode)  
 
Submenu   Purpose   Using 
Brightness  
(**) To adjust the brightness of 
image Press 

17
5.2 Image (Video mode) 
 
 
 
Submenu   Purpose   Using 
Brightness  
To adjust the brightness of 
image. 
 Press 

18
5.3 Display (VGA mode) 
 
Submenu   Purpose   Using 
Frequency  
To adjust the frequency of 
data display to be the same 
as the frequency of display 
card of computer. Please 
use this function to correct 
the flickering vertical lines 
shown in the image. Press 

19  
Proportion 
To select the aspect ratio of 
screen, 16:9 or 4:3. Press