Eiki Efd 46 Owners Manual

19
Controlling the monitor by a computer
When the RS-232C terminal on the monitor is connected to the RS-232C serial terminal on the computer, 
or when the LAN terminal on the monitor is connected to the LAN terminal on the computer, the computer 
can be used to control the monitor. Refer to the “SETUP MANUAL” contained on the supplied CD-ROM for 
details.
„ When connecting to a computer using an RS-232C serial control cable
To RS-232C terminal
To RS-232C terminal
RS-232C serial control cable
(cross...

20
Connecting the Power Cord
Caution
•  Do not use a power cord other than the one 
supplied with the monitor.
Be sure to use a power outlet of 
AC 100-240 V, 50/60 Hz.
Using power supply other than the 
one specifi ed may cause fi re.
•  Place the monitor close to the AC outlet, and 
keep the power plug within reach.
•  This product must only be connected to an AC 
100-240 V, 50/60 Hz, grounded (3-prong) outlet. 
Connecting it to any other kind of outlet will 
damage the product and invalidate the...

21
Preparing the Remote Control
Installing the batteries
1Pull down the tab on the cover 
and remove the cover towards 
the direction of the arrow.2Insert the batteries.
•  Insert the batteries making sure 
the polarities correctly match 
the
+
  and -
  marks inside the 
battery compartment.
3Insert the lower tab of the 
cover into the opening, and 
lower the cover until it clicks in 
place.
Incorrect use of the batteries may cause them to leak or explode. Please follow the 
precautions below.
Caution•...

22
Turning the Monitor On/Off
Turning on the power
PressPOWER on the monitor.
•  POWER indicator (Red): The monitor is on.
•  After turning the power “ON” by pressing POWER
on the monitor, you can turn the power ON by 
pressingON on the remote control.
POWER button
POWER indicator
Caution
•  When switching the POWER, ON or STANDBY 
buttons off and back on, always wait for at least 
5 seconds. A short interval may result in a 
malfunction.
Turning off the power
ON buttonSTANDBY
button
PressSTANDBY on the...

23
COMPUTER (1/2), DVI, HDMI, 
S-VIDEO, VIDEO buttons
AV MUTE button
VOL (Volume) buttons (+/-)
Operating with the Remote Control
Switching the input mode
Select the appropriate input mode for the connected 
equipment.
PressCOMPUTER (1/2), DVI, HDMI, S-VIDEO or 
VIDEO to select the input mode.
• When you press INPUT on the monitor, the 
INPUT list appears.
 Press 
x
/
z
 to switch the input mode.
Adjusting the volume
PressVOL +/– to adjust the volume.
•  You can also adjust the volume using VOL +/– on...

24
Operating with the Remote Control
Resize mode
This function allows you to modify or customize the Resize mode to enhance the input image. Depending on 
the input signal, you can choose a desired image.
1 Press RESIZE.
•  The Resize mode menu appears.
•  The menu lists the Resize mode options 
selectable for the type of signal currently 
received.
Zoom 14:9
S.Stretch
Full Resize
Normal
Cinema 16:9
Cinema 14:9
2 Press RESIZE or 
x
/
z
 while the Resize mode menu is displayed on the screen.
• You can...

25
Operating with the Remote Control
Selectable items Description
Cinema 16:9
Cinema 16:9
For 16:9 letterbox pictures. The top and bottom of the image 
may be cut off depending on the input signal.
Cinema 14:9
Cinema 14:9
For 14:9 letterbox pictures. The top and bottom of the image 
may be cut off depending on the input signal.
Dot by DotDisplay an image with the same number of pixels on the 
screen (only when receiving 1080I/1080P signal via 
component or HDMI terminals).
Computer input
Selectable items...

26
Operating with the Remote Control
FREEZE
button
AUTO SYNC 
button MAGNIFY 
buttons
RETURN
button
AV MODE 
button
Auto Sync adjustment 
(Auto Sync)
“Clock”, “Phase”, “H-Position”, and “V-Position” are 
automatically adjusted.
PressAUTO SYNC.
•  You can also perform Auto Sync adjustment from 
the “Setup” menu.
Freezing a moving image
1 Press FREEZE.
•  The image is frozen.
2 Press FREEZE again to return to the moving 
image from the currently connected device.
• The still image automatically goes out...

27
Operating with the Remote Control
Split-screen viewing
You can display two pictures on the screen simultaneously.
P&P button
SELECT button COMPUTER (1/2), DVI, 
HDMI, S-VIDEO, VIDEO 
buttons
1 Press P&P.
• Split-screen appears.
•  The current input is moved to the left side screen display and surrounded by a blue frame.
•  The other input appears on the right side screen display.
123456789101112 5 10 15 20 25
30 352345678910
2 Press SELECT to set either screen to be active.
•  The active screen,...

28
Menu Operations
•  You need to bring up the On-Screen Display to 
perform settings for the monitor. The On-Screen 
Display for the settings is called “Menu”.
•  The Menu enables various settings and 
adjustments. (See page 29.)
•  The Menu can be operated with the remote 
control.
Basic menu operations
RETURN
button Adjustment/
MOUSE
buttonsMENU
button
ENTER
button
1 Press MENU and the MENU screen appears.
MENU[
Picture]
PictureAudio Power Control 
Contrast  OPC [Off]  AV Mode  [Standard]
Brightness...