Edimax Router BR.6504N User Manual

 
50
2-5-3 Setup procedure for ‘PPPoE’: 
 
 
 
User Name :    Please input user name assigned by your Internet 
service provider here. 
 
Password :    Please input the password assigned by your Internet 
service provider here. 
 
Service Name :    Please give a name to this Internet service, this is 
optional 
 
MTU :    Please input the MTU value of your network connection 
here. If you don’t know, you can use default value. 
 
Connection       Please select the connection type of Internet 
Type :...

 
51
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on other 
setup procedures, or click ‘Apply’ to reboot the router so the settings will 
take effect (Please wait for about 50 seconds while router is rebooting). 
 
If you want to reset all settings in this page back to previously-saved value, 
please click ‘Cancel’ button. 
 
2-5-4 Setup procedure for ‘PPTP’: 
 
PPTP requires two kinds of setting: WAN interface setting (setup IP address) 
and PPTP setting (PPTP user name and...

 
52
WAN interface settings must be correctly set, or the Internet connection will 
fail even those settings of PPTP settings are correct. Please contact your 
Internet service provider if you don’t know what you should fill in these 
fields. 
 
Now please go to PPTP settings section: 
 
 
Here are descriptions of every setup items: 
 
User ID :    Please input user ID (user name) assigned by your 
Internet service provider here. 
 
Password :    Please input the password assigned by your Internet...

 
53
 
Setting item ‘BEZEQ-ISRAEL’ is only required to check if you’re using the 
service provided by BEZEQ network in Israel.   
 
When you finish with all settings, please click ‘OK ; if you want to go back 
to previous menu, click ‘Back’. 
 
2-5-5 Setup procedure for ‘L2TP’: 
 
 
 
Here are descriptions of every setup items: 
 
User ID :    Please input user ID (user name) assigned by your Internet 
service provider here. 
 
Password :    Please input the password assigned by your Internet service...

 
54
When you finish with all settings, please click ‘OK ; if you want to go back 
to previous menu, click ‘Back’. 
 
 
2-5-6 Setup procedure for ‘Telstra Big Pond’: 
 
 
 
This setting only works when you’re using Telstra big pond’s network 
service in Australia. You need to input: 
 
User Name :      Please input the user name assigned by Telstra. 
 
Password :     Please input the password assigned by Telstra. 
 
User device login    Check this box to choose login server by yourself. 
server manually...

 
55
2-5-7 Setup procedure for ‘DNS’: 
 
If you select ‘Dynamic IP’ o r  ‘PPPoE’ as Internet connection method, at least 
one DNS server’s IP address should be assigned automatically. However, if 
you have preferred DNS server, or your service provider didn’t assign the IP 
address of DNS server because of any reason, you can input the IP address of 
DNS server here. 
 
 
 
Here are descriptions of every setup items: 
 
DNS Address :    Please input the IP address of DNS server provided by 
your service...

 
56
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on other 
setup procedures, or click ‘Apply’ to reboot the router so the settings will 
take effect (Please wait for about 50 seconds while router is rebooting). 
 
If you want to reset all settings in this page back to previously-saved value, 
please click ‘Cancel’ button. 
 
 
2-5-8 Setup procedure for ‘DDNS’: 
 
DDNS (Dynamic DNS) is a IP-to-Hostname mapping service for those 
Internet users who don’t have a static (fixed) IP...

 
57
 
 
Here are descriptions of every setup items: 
 
Dynamic DNS :    If you want to enable DDNS function, please select 
‘Enabled’; otherwise please select ‘Disabled’. 
 
Provider :      Select your DDNS service provider here. 
 
Domain Name :    Input the domain name you’ve obtained from DDNS 
service provider. 
 
Account /        Input account or email of DDNS registration. 
E-Mail :   
 
Password / Key :    Input DDNS service password or key. 
 
After you finish with all settings, please click...

 
58
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on other 
setup procedures, or click ‘Apply’ to reboot the router so the settings will 
take effect (Please wait for about 50 seconds while router is rebooting). 
 
If you want to reset all settings in this page back to previously-saved value, 
please click ‘Cancel’ button. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

 
59
2-6 Wired LAN Configuration 
Before all computers using wired Ethernet connection (i.e. those computers 
connect to this router’s LAN port 1 to 4 by Ethernet cable) can communicate 
with each other and access internet, they must have a valid IP address. 
 
There are two ways to assign IP addresses to computers: static IP address (set 
the IP address for every computer manually), and dynamic IP address (IP 
address of computers will be assigned by router automatically. It’s 
recommended for most of...