Edimax Router BR-6315SRg User Manual

							 
90 
  
						

							 
91 
10) Click “Finish”. 
 
 
 
 
11) Select a suitable printer manufacturer and the printer model and click 
“Next”. If your printer is not in the list, click “Have Disk…” to install the driver of 
the printer. After installation, the printer model will be added to the list. 
 
  
						

							 
92 
12) Choose to set the print whether as a default printer or not. Click “Next”. 
 
 
 
13) You have added the network printer to the PC successfully. The 
information of the printer is displayed in the windows. Click “Finish”. 
 
 
 
  
						

							 
93 
2.8.2 IPP Printing 
IPP (Internet Printing Protocol) Printing provides a convenient way of remote 
printing service by TCP/IP. The Print Server can support IPP printing in 
Windows 2000/XP/2003 by default. By using the IPP printing, you can share 
the printer to all the PC’s that can access the Print Server by Internet Protocol 
(IP). 
 
To configure the IPP Printing on Windows 2000/XP/2003, you have to make 
sure the print server has correct IP settings. If you want to share the printers to 
Internet users, you have to set a valid Internet IP address to the Print Server. 
You also have to make sure that there’s no gateway, router or firewall blocking 
IPP protocol if you have these gateway devices installed in your network. 
 
At client side, please follow the steps below to configure the LPR setting in 
Windows 2000/XP/2003. 
 
1) Click “Start”, choose “Settings” and select “Printers and Faxes”. 
2) Click “Add a Printer”. 
3) The “Add Printer Wizard” is displayed. Click “Next”. 
 
 
  
						

							 
94 
4) Select “A network printer, or a printer attached to another computer”, then 
click “Next”. 
 
 
 
5) Select “Connect to a printer on the Internet or on a home or office network” 
and enter the URL of Print Server. The URL format is “http://IP:631/Port Name”. 
The IP should be the Print Server’s IP. The number 631 is IPP standard port 
number. Port Name is the port name of Print Server that your printer is 
connected to. The default port name is “lpt1”. One example of the URL is 
http://192.168.2.1:631/lpt1. After entering the URL of Print Server, click “Next”. 
  
						

							 
95 
 
  
						

							 
96 
6) Select a suitable printer manufacturer and the printer model and click “Next”. 
If your printer is not in the list, click “Have Disk…” to install the driver of the 
printer. After installation, the printer model will be added to the list. 
 
 
 
7) Choose to set the print whether as a default printer or not. Click “Next”. 
 
 
 
  
						

							 
97 
8) Now you have successfully added the network printer to your PC. The 
information of the printer will be displayed in the window. Click “Finish”. 
 
 
 
  
						

							 
98 
2.9 File/FTP Server 
The router provides File/FTP Server function, which lets you share the USB 
mass storage device to all PCs in your Intranet or on Internet. It supports 
SAMBA protocol, let you share files via network neighborhood. And also 
supports FTP sever function for other computer to upload/download files from 
the server by FTP client program. 
 
Parameters   Description 
Users setup  You can add/edit users of File/FTP server. 
File Server 
setup You can add/edit the name of file server, shared folders 
and sharing policies of files that will be shared via 
Network Neighborhood. 
FTP Server 
setup You can add/edit FTP folders and configure some 
advanced settings for FTP server. 
Storage Tools The storage tools allow you to manage the partitions of 
the USB storage device. You can add, remove, or format 
the partition of the USB storage device. 
Storage Status The storage status shows the status of both USB ports. 
When you plug a USB storage device into the USB ports, 
it will show the status of the current valid disk and partition 
of this device.  
						

							 
99 
Click on one of the File/FTP server selections and proceed to the relevant 
sub-sections. 
 
Note: The maximum file size of a single file is 2GB when partition type is 
FAT16/32, if partition type is EXT2/3, the maximum file size is up to 4GB. 
 
2.9.1 Users setup 
Users setup is used to add/edit users of File/FTP server. 
 
 
 
Parameters   Description 
Add Click “Add” and fill the information of the Add a New User 
page to add a new user for File/FTP server. 
Edit You can select any user in Users list and click “Edit” to 
modify his profile. 
Delete Selected You can click “Delete Selected” to delete the selected 
users in Users list. 
Delete All You can click “Delete All” to delete all the users in Users 
list. 
Reset  You can click “Reset” to reset selection in Users list.