Edimax Router AR-7265WnA User Manual

 53
5.4.5. DDNS 
DDNS allows you to map the static domain name to a dynamic IP address. You 
must get an account, password and your static domain name from the DDNS 
service providers. 
 
 
 
Parameter Description 
Dynamic DNS  Activated or deactivated the DDNS function. 
  
Service Provider  This router supports DynDNS service provider. 
  
My Host Name  Enter the domain name assigned to your router by the 
service provider. 
  
E-mail Address  Enter the E-mail address assigned by DDNS service...

 54
5.5. Maintenance 
5.5.1. Administrator 
 
 
 
Parameter Description 
Username  The username of the router is “admin” by default. 
  
New Password  Enter up to 30-digit of the new password. 
  
Confirm Password  Enter the new password again to confirm the setting. 
  
 
 
 
 
 
 
 
 
 
 
 
 
 
  

 55
5.5.2. Time Zone 
The Time Zone allows your router to set its time; this will affect function such as 
System Log. 
 
 
 
Parameter Description 
Current Date/Time  Show the current date/time of the router. 
  
Synchronize time with  NTP Server Automatically – Set the time by following 
with a NTP Server. 
 
PC’s Clock – Set the time the same as your computer. 
 
Manually – Set the time manually. 
  
Time Zone  Select the time zone of the country you are currently in. 
The router will set its time...

 56
5.5.3. Firmware 
If you have new firmware for some features update, please upgrade firmware of 
the router here. 
 
 
Parameter Description 
Current Firmware 
Version The current firmware version will be shown here. 
  
New Firmware 
Location Type in the location of the new firmware or click “Browse”
to find it. 
  
New Romfile Location  To restore the backup settings, please type in the 
location of the backup file or click “Browse” to find it.  
  
Romfile Backup  To save the current settings as a...

 57
5.5.4. System Restart 
In this page, you can restart your router or restore to factory defaults. If you wish 
to restart the router using the factory default settings, select “Factory Default 
Settings” to reset to factory defaults. You can also click the “Reset” button in the 
rear panel of the router over 5 seconds to reset default settings. 
 
 
 
 
5.5.5. Diagnostics 
This page allows you to diagnose the connectivity of the LAN and WAN network.  
 
 
 
  

 58
5.6. Status 
5.6.1. Device Info 
In this page, you can know the device information including firmware, MAC 
Address, LAN and WAN settings and also the ADSL line status. 
 
 
 
 
 
 
 
 
 
 
 
  

 59
5.6.2. System Log 
Display system logs accumulated up to the present time. You can also save the 
logs for future reviewing. 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

 60
5.6.3. Statistics 
Show the statistics of transmit and receive packets on the LAN port, ADSL line or 
WLAN port. 
 
 
 
 
 
 
 
 
 
 
  

 61
6. Troubleshooting 
1.  The LAN LED on the front panel does not light up. 
 
STEPS CORRECTIVE ACTION 
1  Check the Ethernet cable connections between your ADSL2+ 
Router and the computer or hub.  
2  Check for faulty Ethernet cables. 
3  Make sure your computer’s Ethernet card is working properly. 
4  If these steps fail to correct the problem, contact your local 
distributor for assistance. 
 
 
2.  The ADSL LED on the front panel does not light up. 
 
STEPS CORRECTIVE ACTION 
1  Check the telephone...

 62 The following procedures will help you to check the current IP Address setting of 
your computer. You can compare if your computer and router’s IP Addresses are 
in the same subnet. 
 
Step 1: Click “Start” and select “Run”. 
 
Step 2: Type in “cmd” and click “OK”. 
 
 
 
Step 3: Type ipconfig /all and click enter. 
 
 
 
z Your PC’s IP address is 192.168.2.111. 
z The PC’s Subnet Mask is 255.255.255.0. 
z Your PC’s MAC Address is the one entitled Physical Address (00-00-E2-82-
C3-AD).