Dyson Dc07 Owners Manual
Have a look at the manual Dyson Dc07 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 16 Dyson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Using the tools Hose mode Press the hose release button and remove the wand. Fit one of the tools directly on to the end of the hose. FOR YOUR SAFETY • When the hose is fully extended, grasp firmly by the hose, not the tool.Reversed wand mode (for selected models only) Remove wand as shown for hose mode. Reverse the wand and click it into the end of the hose, pressing the hose release button to ensure a correct fit. Fit one of the tools on to the end of the wand. tipThe vacuum has been designed to follow you when used in wand or hose mode.Stair cleaning Use the hose and stair tool for stair cleaning. The hose will stretch all the way to the top of an average staircase so you can leave your machine at the bottom. CAUTION • To avoid personal injury and to prevent the machine from falling when cleaning stairs, always place it at the bottom of the stairs. • Powerful suction can cause the hose to “pull back.” Please take care using the wand. 11www.dyson.com 18858_OPS_MANUAL_UPDATE_US.qxd 7/1/08 16:45 Page 11
Emptying the Clear bin TM Removing the bin Press the cyclone release catch with your thumb to remove the clear bin TMassembly from the machine. To ensure your machine continues to clean effectively, the clear bin TM must be emptied when the dust reaches the level of the MAX mark. •When removing bin, do not pull up on carry handle while pressing cyclone release catch. •When replacing the bin, ensure it clicks back into place.Clear bin TMemptying option 2 Emptying into a bag is recommended for allergy sufferers. Place bin in bag and pull the trigger to release dust. Let dust settle and close bin base securely before removing from bag and refitting cyclone and bin on machine. Clear binTMemptying option 1 Pull the trigger to release dust directly into a garbage can or wastebasket. Shake or tap firmly to remove all dust from inside the cyclone. Dyson Helplinecontact us at1- 866- 693- 97667 days a week12 Emptying the Clear bin TM CAUTION • Turn power off and unplug before emptying the bin. Failure to do so could result in electric shock or personal injury. • Do not use machine without clear bin TMin place. 18858_OPS_MANUAL_UPDATE_US.qxd 7/1/08 16:45 Page 12
Emptying the Clear bin TM Shroud cleaning (when necessary) To remove any build-up of lint or large dust particles on the shroud: APress the bin release catch to remove the clear bin TM. BClean the shroud with a cloth or dry brush to remove the lint and dust. CAUTION • Do not use the machine without the clear bin TMin place. tipClear bin TMwill not come off cyclone unless the bin base is open.To reassemble the clear bin TM, place on the floor with the clear bin TMbase closed. CHolding the carry handle, put the cyclone assembly inside the clear bin TM,line up the front and rear catches, and push down to click the catches into place. DEnsure the clear bin TMis secure before replacing on the machine. Clear binTMcleaning (optional) IMPORTANT • You may rinse the clear bin TM with water. Rinse only the clear binTM– do not rinse the inner cyclone, shroud, or cones. • Do not use detergents. • Do not immerse any other part of the machine in water. • Ensure the clear bin TMis completely dry before replacing. A B C D 13www.dyson.com 18858_OPS_MANUAL_UPDATE_US.qxd 7/1/08 16:45 Page 13
Clearing blockages Wand Remove wand as shown on page 11, and press the wand release button to remove the wand from the hose. Check inside wand for blockages. CAUTION • Beware of sharp objects when clearing blockages.Hose APress the cyclone release catch to remove the clear bin TM assembly from the machine. BPress the lower hose release button from the front of machine andslide the hose out from the rear, holding the lower cord winder. Check inside the hose for blockages. Clearing blockages CAUTION • Unplug the machine from the electrical outlet before starting to look for blockages. Failure to do so could result in electric shock or personal injury. • If any part of the machine becomes blocked it may overheat and then stop automatically shut off. Unplug machine and leave to cool down for at least 60 minutes before clearing the blockage. • Regularly wipe the soleplate and wheels with a dry cloth after vacuuming to clean off any sand, dirt, or pebbles that could damage delicate floors. • Please note: clearing blockages is not covered by your machine’s limited warranty. • Refit all parts of the machine before using it. A B Dyson Helplinecontact us at1- 866- 693- 97667 days a week14 Tools Check that the tools are clear of blockages. 18858_OPS_MANUAL_UPDATE_US.qxd 7/1/08 16:45 Page 14
Clearing blockages U-bend • Tilt the machine forward to slide out the U-bend. • Check inside for blockages.Airway inspection valve • Squeeze the valve release buttons to remove the airway inspection valve. • Check inside for blockages.CAUTION • The ratcheting noise may warn that the brushbar is obstructed. If this occurs, unplug the machine from the electrical outlet before removing the obstruction. 1 2 15www.dyson.com Brushbar Lay the machine on its front. 1Undo the colored soleplate fasteners using a coin and remove the soleplate. 2Clear the brushbar obstruction, carefully cutting away any threads with a pair of scissors. 3Replace the soleplate and tighten the fasteners. When replacing the soleplate, the soleplate must be fitted securely with the bottom of the cleanerhead to achieve optimal performance. Check the alignment of the soleplate with front edge of cleanerhead. 3 18858_OPS_MANUAL_UPDATE_US.qxd 7/1/08 16:45 Page 15
Usage Extends and flexes to clean awkward gaps and spaces Using and maintaining optional accessories Using and maintaining optional accessories • Not all accessories available with all models. • Colors may vary. CAUTION • Do not use your vacuum cleaner outdoors or on wet surfaces. Vacuum may be used inside a garage only when used with the Model 08909 Dyson Car Cleaning Kit accessories. If used in a garage, care should be taken to wipe the soleplate and wheels with a dry cloth after vacuuming to clean off any sand, dirt, or pebbles that could damage delicate floors. BCarpet – Press rear pedal AAttach low reach floor tool to wand and recline handle CBare floors – Press front pedal Low reach floor tool Dyson Helplinecontact us at1- 866- 693- 97667 days a week16 Flexi crevice tool AExtend and flex BUse with or without brush A B Usage For easier cleaning under low furniture 18858_OPS_MANUAL_UPDATE_US.qxd 7/1/08 16:45 Page 16
Using and maintaining optional accessories ASprinkle Zorb onto carpet BEnsure machine is turned off EVacuum the carpet DWait 30 minutes Replace brushbars Replace soleplate Remove and clean brushbars Remove soleplate CWork into carpet pile Usage Carpet cleaning Zorb carpet powder C A D B Mini turbine head Usage Advanced turbine head removes dirt from upholstery, stairs, and the carMini turbine head Maintenance 17 A B C D www.dyson.com APush in to stop brushbar from spinning BAdapter release button not used on all models A B 18858_OPS_MANUAL_UPDATE_US.qxd 7/1/08 16:45 Page 17
Troubleshooting your Dyson Problem Potential solution Less than normal or no pickup • If vacuuming non-delicate carpeting, ensure brush control is from cleanerhead or set on carpets mode. Note: brushbar will only spin when the handle is reclined. Machine turns off in use • Remove and check washable filter to see if it is clean (filter should be blue in color). Wash filter if necessary as shown on page 8. • If you removed the soleplate, it must be refitted flush with the cleanerhead. If it is not, refit soleplate as shown on page 15 and re-check performance. • Be sure the filter housing, U-bend, and airway inspection valve are snapped in securely and confirm there are no blockages. Less than normal or no suction •Confirm the U-bend is in place and that there are no blockages. from wand or hose • Remove the wand and check for blockages. • Confirm the hose has no blockages or holes by stretching it out. • Be sure the filter housing and airway inspection valve are snapped in securely and confirm there are no blockages. • Remove and check washable filter to see if it is clean (filter should be blue in color). Wash filter if necessary as shown on page 8. Brushbar not spinning • Ensure brush control is set on carpets mode. Note: brushbar will only spin when the handle is reclined. Loud ‘ratcheting’ noise coming •Ratcheting may indicate there is an obstruction in the brushbar from cleanerhead when and is meant to protect the belt in the machine. Note: the vacuuming ratcheting may also occur if your carpet is not adequately attached to the floor or if your rug has loose tassels. (This noise does not hurt the machine.) • Check to see if there is an obstruction in the brushbar as shown on page 15. • Note: when refitting the soleplate it must be fitted securely. Affix as shown on page 15. • If there is no obstruction, you may want to set brush control to bare floors mode. Unit will not stand upright • Stand behind the vacuum holding the handle at a 45 degree angle. • Locate and remove the airway inspection valve and take note of the square plastic molding where the airway inspection valve plugs into. (It should slide up and down.) • Snap that square plastic piece up toward the ceiling. • After it snaps into place, the unit will stand upright. Refer to page 3 for an illustration of DCO7. If this does not help with your problems, please call the Dyson Helpline at 1-866-693-9766. The Helpline is open 7 days a week to answer your questions. Dyson Helplinecontact us at1- 866- 693- 97667 days a week18 18858_OPS_MANUAL_UPDATE_US.qxd 7/1/08 16:45 Page 18
Limited warranty and Customer care Thank you for choosing to buy a Dyson. If you have a question about your Dyson vacuum cleaner, call the Dyson Helpline at 1-866-693-9766with your serial number and details of where and when you bought the cleaner. Your serial number can be found on the rating plate, which is on the base of your machine between the wheels. Most questions can be solved over the phone by one of our Helpline staff. If your machine needs service, call the Dyson Helpline. We will discuss with you the options available for service. If your machine is under warranty and it is a covered repair, your machine will be repaired at no cost. To reach the Dyson Helpline call at 1-866-693-9766 toll free, or visit Dyson online at www.dyson.com To help us ensure you receive prompt and efficient service, please register your purchase with us. There are two ways to do this: • by completing and returning the enclosed form to us by mail. • online at www.dyson.com This will confirm ownership of your Dyson in the event of an insurance loss and enable us to contact you if necessary. If you have any questions about your Dyson, please call our Customer Helpline at 1-866-693-9766, 7 days a week, or log on to our website at www.dyson.com What is covered Your Dyson vacuum cleaner is warranted against original defects in material and workmanship for a period of five years from the date of purchase, when used for private household purposes in accordance with the Dyson Owner’s Manual. This warranty provides, at no extra cost to you, all labor and parts necessary to ensure your vacuum cleaner is in proper operating condition during the warranty period. This warranty is subject to the following terms: What is not covered Dyson, Inc. shall not be liable for costs incurred as a result of: • Machines purchased from an unauthorized dealer. • Clearing blockages from your machine. • Use of parts not in accordance with the Owner’s Manual. • Careless operation or handling, misuse, and/or lack of maintenance or use not in accordance with the Owner’s Manual. • External sources such as weather. • Repairs or alterations carried out by unauthorized parties or agents. • Use of the vacuum cleaner other than for normal domestic household purposes within the United States, e.g., for commercial or rental purposes. • Use of parts and accessories other than those produced or recommended by Dyson, Inc. Warranty Service • Please fill out and return the Product Registration Form, or register online at www.dyson.com • Before service can take place, the terms of the warranty require that you contact the Dyson Helpline with your model name/number, serial number, date, and place of purchase. Please keep your purchase receipt in a safe place to ensure you have this information. • All work will be carried out by Dyson, Inc. or its authorized agents. • Any replaced defective parts will become the property of Dyson, Inc. • Service under this limited warranty will not extend the period of this warranty. • If your machine is not functioning properly, please call the Dyson Helpline at 1-866-693-9766. Most issues can be rectified over the telephone by our trained Customer care staff. If this is not possible Dyson, Inc. will arrange for your vacuum cleaner to be repaired and returned in full working order at no extra cost to yourself. Dyson Customer care 19 Limited 5 year household warranty Terms and Conditions of the Dyson 5 year limited warranty 120V 60Hz 10.5A Note your serial number for future reference: Your serial number can be found on the rating plate, which is on the base of your machine between the wheels. www.dyson.com 18858_OPS_MANUAL_UPDATE_US.qxd 7/1/08 16:45 Page 19
Limited warranty and Customer care This product is protected by the following intellectual property rights: Patent/Patent Application numbers: CA 1,241,809; US 4,573,236; CA 2,312,827; US 6,526,623; CA 2,313,177; US 6,691,849; CA 2,315,078; US 6,289,553; CA 2,325,953; US 6,425,931; US 6,461,508; CA 2,351,552; US 6,572,078; US 6,442,791; AU 2001232024; CA 2400404; EP 1265519; JP 2001-564647; US 2003-0102619; AU 2002231965; CA 2,438,855; EP 1361813; JP 2002-567126; US 2004-0068829; AU 287872; EP 1320317; JP 2004-509684; US 2003-0163889; AU 2002226556; CA 2,439,250; EP 1370172; JP2004-528876; US 2004-0074213; AU 2002229966; CA 2,439,032; EP 1361812; JP 2002-567124; US 10/468,870; AU 2002226554; CA 2,438,077; EP 01370173; JP 2002-567131; US 2004-0144070; AU 2002241151; CA 2442218; EP 1377196; JP 2004-528087; JP 2004-0112018; AU 2002225207; CA 2,438,069; EP 1361814; JP 2004-520137; US 2004-0112022; AU 2002225232; CA 2,438,079; EP 1361815; JP 2004-520139; US 2004-0068827 Registered Design/Application numbers: CA 97332; US D475,820; CA 86192; US D427,737; US D455,242 Please note:Small details may vary from those shown. Dyson Helplinecontact us at1- 866- 693- 976620Warranty Limitations and Exclusions • Any implied warranties relating to your vacuum cleaner, including but not limited to warranty of merchantability or warranty of fitness for a particular purpose, are limited to the duration of this warranty. This limitation is not allowed by some states and so this limitation may not apply to you. • Your remedy for breach of this warranty is limited to the warranty service described above. Dyson, Inc. will not be liable for any consequential damages or incidental damages you may incur in connection with your purchase and use of your vacuum cleaner. This limitation is not allowed by some states and so this limitation may not apply to you. • This warranty gives you specific legal rights. You may also have other rights that vary by state. • This warranty is not transferable.JN.18858 PN. 04482-13-02 07.01.08 Terms and Conditions (continued) www.dyson.com 18858_OPS_MANUAL_UPDATE_US.qxd 7/1/08 16:45 Page 20