Dukane Liquid Crystal Projector Model 8055 Users Manual

9
Connecting Your Devices
WARNING• Incorrect connecting could result in fire or electrical shock.
Whenever attempting to connect other devices to the projector, please thoroughly read
the Users Manual - Safety Guide, this manual and the manual of each device to be
connected.
CAUTION
• TURN OFF ALL DEVICES prior to connecting them to the projector.
Attempting to connect a live device to the projector may generate extremely loud
noises or other abnormalities that may result in malfunction and/or damage to...

10
Please refer to the following for connecting your devices.
See the rear of the projector. You can see the ports.
$
*/
L-AUDIO-RVIDEO
S-VIDEO IN AUDIO OUT
AUDIO INY
COMPONENT VIDEOCB/PBCR/PR
RGB IN
CONTROL
RGB OUT
USB
L-AUDIO-RVIDEO
S-VIDEO IN AUDIO OUT
AUDIO INY
COMPONENT VIDEOCB/PBCR/PR
RGB IN
CONTROL
RGB OUT
USB
L-AUDIO-RVIDEO
S-VIDEO IN AUDIO OUT
AUDIO INY
COMPONENT VIDEOCB/PBCR/PR
RGB IN
CONTROL
RGB OUT
USB
L-AUDIO-RVIDEO
S-VIDEO IN AUDIO OUT
AUDIO INY
COMPONENT VIDEOCB/PBCR/PR
RGB IN
CONTROL
RGB...

11
1
$
*/
Connect the connector of the
power cord to the AC inlet of the
projector. 

2Firmly plug the power cord’s plug
into the outlet.
WARNING• Please use extra caution when connecting the power cord as
incorrect or faulty connections may result in FIRE and/or ELECTRICAL SHOCK. Please
adhere to the “User’s manual – Safety Guide” and the following. 
• Only plug the power cord into outlets rated for use with the power cord’s specified
voltage range.
• Only use the power cord that came with the...

12
CAUTIONAlways handle the batteries with care and use them only as directed.
Improper use may result in battery cracking or leakage, which could result in fire, injury
and/or pollution of the surrounding environment.
• Keep the battery away from children and pets.
• Be sure to use only the batteries specified for use with the remote control. Do not mix
new batteries with used ones.
• When inserting batteries, verify that the plus and minus terminals are aligned correctly
(as indicated in the remote...

13
Operating The Remote Control
ATTENTION• Do not drop or otherwise expose the remote control to physical
impact.
• Do not get the remote control wet or place it on wet objects. Doing so may result in
malfunction.
• Remove the batteries from the remote control and store them in a safe place if you
won’t be using the remote control for an extended period.
• Replace the batteries whenever the remote control starts to malfunction.
• When strong lights, such as direct sunlight or light from an extremely...

14
STANDBY/ONINPUTPOWER
LAMP
TEMP
MENU
Power ON/OFF
Turning On The Power
WARNING• When the power is ON, a strong light is emitted. Do not look into the
lens or vents of the projector.
• Turn the power on/off in right order. Please power on the projector before
the connected devices. Power off the projector after the connected devices.NOTE
1Make sure that the power cord is
firmly and correctly connected to the
projector and outlet.
2When the lens cap is attached, remove
the lens cap.
3Set the power switch...

15
VIDEO
ASPECT
GO
VOLUME MAGNIFY
HOME PAGE UP
AUTOBLANK RGB
SEARCH
ON
VIDEO
ASPECT
VOLUME MAGNIFY
HOME PAGE UP
AUTOBLANK RGB
SEARCH
ON
Selecting An Input Signal
1
2Use the zoom ring to adjust the screen
size.
3Use the focus ring to focus the picture. Press the INPUT button.
As illustrated below, each time you press the INPUT
button, the projector switches between its input signal
ports. Select the signal you wish to project.
Using the projector’s control button
Press the RGB button.
When this button is...

16
Turning Off The Power
• Turn the power on/off in right order. Please power on the projector before
the connected devices. Power off the projector after the connected devices.NOTE
$
*/
Power switch
STANDBY/ONINPUTPOWER
LAMP
TEMP
MENU
STANDBY/ON button   POWER indicator
1Press the STANDBY/ON button of the
projector or the  button of the remote
control.
The message “Power off?” will appear on the screen
for approximately 5 seconds.
4Attached the lens cap.
2Press the STANDBY/ON button again
while “Power...

17
Operating
Adjusting The Volume
Temporarily Muting The Sound
1Press the VOLUME button.
As illustrated on the right, a dialog will
appear on the screen to aid you in adjusting
the volume.
2Use the /
buttons to adjust the
volume.
Press the VOLUME button again to close the dialog and
complete this operation.
(Even if you dont do anything, the dialog will
automatically disappear after a few seconds.)
Press this to increase the volume
Press this to decrease the volume
16
VOLUME
16
VOLUME
VOLUMEVOLUME
1Press...

18
Adjusting The Position
1Press the POSITION button.
As illustrated on the right, a dialog will appear on the screen
to aid you in adjusting the position.
2Use the,,,
buttons to adjust
the position.
When you want to initialize the position, press the RESET
button during adjustment.
Press the POSITION button again to close the dialog and
complete this operation.  (Even if you dont do anything, the
dialog will automatically disappear after a few seconds.)
This function is only available for RGB input....