Dukane Imagepro 9135 Portable Lcd Projector Users Manual

							29
Multifunctional Settings (continued) Multifunctional Settings (continued)
AUTO Menu
With the AUTO menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.
ItemDescription
ADJUST
Pressing the  (or the ENTER) button performs the automatic adjustment. 
■For an RGB signal
The vertical position (V POSITION), the horizontal position (H POSITION), the
clock phase (H PHASE) and the horizontal size (H SIZE) will be automatically
adjusted. And the aspect ratio (ASPECT) will be automatically selected. 
Make sure that the application window is set to its maximum size prior to
attempting to use this feature. Dark pictures may still be incorrectly adjusted.
Use a bright screen when adjusting.
■For a video signal or s-video signal
The signal type mode best suited for the respective input signal 
will be
selected automatically.
This function is available only when the AUTO is selected to the item
“VIDEO” of the INPUT menu. For a component video signal, the signal type is
identified automatically independently of this function.
■For a video signal, s-video signal or component video signal
The vertical position and horizontal position will be automatically adjusted.
■For a component video signal
The aspect ratio will be automatically selected.
The clock phase will be automatically adjusted.
memoThis operation requires approximately 10 seconds, and the message
“AUTO IN PROGRESS” is displayed during the operation. 
memoThis operation may not work well at some signals. If the picture
becomes unstable (ex. a irregular picture, a color lack), please select the
suitable mode to the item “VIDEO” of the INPUT menu.
POWER OFF
Set the time using the  / buttons. :
Long (max. 99 minutes) 
Short (min. 0 minute = DISABLE)
ex.
When the time is set to 1 to 99, the projector lamp will go off and the
STANDBY/ON indicator begins blinking when the passed time with a proper
signal (without no-signal and an unsuitable signal) reaches at the set time.
Please refer to the section “Turning Off The Power”.
: SELECT
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORKADJUST
POWER OFF
SEARCH
RESET0 min
TURN ON
(This table is continued to the following page.)
AUTO
POWER OFF
ENABLE
1min
AUTO
POWER OFF
DISABLE
0min 
						

							30
Multifunctional Settings (continued) Multifunctional Settings (continued)
ItemDescription
SEARCH
Select the TURN ON or the TURN OFF using the  /  buttons. :
TURN ON 
TURN OFF
When the TURN ON is selected, detecting no signal cycles through input ports
and displays the picture of retrieved signal.
memoWhen the TURN ON is selected, pressing the RGB button selects the
M1-D ports, and pressing the VIDEO button selects the COMPONENT port. 
memoIf no signal is found or the projector is unstable to find an input signal at
any of its ports, it will return to the state it was in prior to the search.
RESET
Select the EXECUTE using the  button to reset the AUTO menu items. :
EXECUTE CANCEL
The items of the AUTO menu are collectively returned to the initial setting. Note
that the item “ADJUST” is not reset.
AUTO Menu (continued)
BNCM1-D RGB
VIDEO S-VIDEO
COMPONENT 
						

							
31
Multifunctional Settings (continued)
Multifunctional Settings (continued)
SCREEN Menu
With the SCREEN menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.

: 
SELECT
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORK BLANK
START UP
MyScreen
MyScreen LOCK
MENU POSITION
MESSAGE
RESET
BLACK
ORIGINAL
TURN OFF
TURN ON

ItemDescription
BLANK
Select a type of the BLANK screen using the  /  buttons. :
MyScreen  
ORIGINAL  
BLUE  
WHITE  
BLACK
The BLANK screen is the screen, which is displayed by pressing the BLANK\
 button.The MyScreen is the screen you can register a desired screen, and the
ORIGINAL is the existing standard screen. The BLUE, the WHITE and the
BLACK are the non-pattered (plain) screens in each color. 
memo To avoid remaining as an afterimage, the MyScreen and the ORIGINAL
screens will change to the BLACK screen after several minutes.
memo For the MyScreen, please refer to the item “MyScreen” in this tabl\
e.

START UP
Select a type of the START UP screen using the  /  buttons. :
MyScreen  
ORIGINAL  
TURN OFF
The START UP screen is the screen, which is displayed by detecting no si\
gnal
or an unsuitable signal. 
The MyScreen is the screen you can register a desired screen, and the
ORIGINAL is the existing standard screen. When the TURN OFF is selected,\
the BLACK is used.
memo To avoid remaining as an afterimage, the MyScreen and the ORIGINAL
screens will change to the BLANK after several minutes. If also the BLAN\
K
screen is the MyScreen or the ORIGINAL, it will change to the BLACK scre\
en.
memo About the MyScreen, please refer to the item “MyScreen” in this ta\
ble.
About the BLUE, BLACK and BLANK screens, please refer to the item “BL\
ANK”
in this table.

MyScreenPressing the (or the ENTER) button starts the MyScreen registration. Please
see the flow chart on the following page.

MyScreen LOCK
Select the TURN ON or the TURN OFF using the  /  buttons.: TURN ON  
TURN OFF
The TURN ON disables the operation of the item “MyScreen” of this \
SCREEN
menu.

MENU POSITION
Adjust the menu position using the  /  / / buttons. : Up
Left +  Right

Down
memo To finish this operation, press the ESC button but not the  button.

(This table is continued to the following page.) 
						

							32
Multifunctional Settings (continued) Multifunctional Settings (continued)
ItemDescription
MESSAGE
Select the TURN ON or the TURN OFF using the  /  buttons. :
TURN ON 
TURN OFF
When the TURN ON is selected, the following message function works.
The message of the “AUTO IN PROGRESS” for the auto adjustment. 
The message of the “NO INPUT IS DETECTED”
The message of the “SYNC IS OUT OF RANGE”
The message of the “Searching …”
The message of the “Detecting …”
The indication of the input signal by input change.
The indication of the aspect ratio by changing the aspect ratio.
The indication of “FOCUS” by adjusting the focus.
The indication of “FREEZE” and “||” while freezing the screen by pressing the
FREEZE button.
memoWhen the TURN OFF is selected, please remember if the picture is
freezing. Do not mistake freezing for a malfunction.
RESETSelect the EXECUTE using the  button to reset the SCREEN menu items. :
EXECUTE CANCEL
The items of the SCREEN menu are collectively returned to the initial setting.
SCREEN Menu (continued)
How to register your picture as the MyScreen
MyScreen is pointed on the SCREEN menu.
The MyScreen
menu appears.
Do you capture the picture from
the current screen?
Registering. 
It takes about 1 minute to register.
Just when the picture registration is completed
the registered screen and
the message of the right is displayed for a few seconds.
If the picture registration failed,
the message of the right is displayed for a few seconds.The picture freeze and the frame for capturing appears.
Move the frame to the position of the picture
which you want to use, using     /    /    /    buttons,
and press the ENTER button to register.
NO: Press the ESC/RESET button
YES: Press the ENTER button If the ESC/RESET 
button is pressed ...
Press the    button
:NOESCENT:YES
MyScreen
Do you start capturing this picture?
:RETURNESCENT:NEXT
MyScreen
Move the capture areaas you want.
My Screen
45%
MyScreen registration is finished.
A capturing error has occurred.
Please try again. 
						

							ItemDescription
VOLUMEAdjust the volume using the  /  buttons. : 
High 
Low
SPEAKERSelect the TURN ON or the TURN OFF using the  /  buttons. :
TURN ON 
TURN OFF
When the TURN ON is selected, the built-in speaker works.
IR REMOTE
Select a remote sensor using the  /  button (1), then switch
it using the ENTER button (2). :
(1) 1 : FRONT 
2 : TOP 
3 : REAR   (2) (Off)  
(On)
memoA sensor cannot be turned off when the other two are off.
Always at least one sensor is on.
IR REMOTE ID
Select a number as an ID number for remote control using the  /  buttons. :ALL 
1 
2 
3
The projector is controlled by the remote control whose ID CHANGE switch is
set into the position of the same number as this number. When the ALL is
selected, the projector is controlled by a remote control irrespective of the
position of the ID CHANGE switch. 
memoPlease refer to the section “Using The Remote ID Feature”.
LAMP TIME
Pressing the buttonor RESET button displays the LAMP TIME menu. 
Select the RESET using button to reset the timer. :
RESET CANCEL
Selecting the RESET resets the count of the lamp timer to 0. 
memoPerform this function only when you have replaced the lamp. The lamp
timer counts the used time of the current lamp, to display the messages about
the lamp. Incorrect performing causes incorrect operation of the messages.
memoAbout replacing the lamp, please refer to the section” Lamp”.
FILTER TIME
Pressing the buttonor RESET button displays the FILTER TIME menu. 
Select the RESET using button to reset the timer. :
RESET CANCEL
Selecting the RESET resets the count of the filter timer to 0. 
memoPerform this function only when you have cleaned or replaced the air
filter. The filter timer counts the used time of the air filter after cleaning or
replacement, to display the messages about the air filter. Incorrect performing
causes incorrect operation of the messages.
memoAbout caring for the air filter, please refer to the section “Air Filter”.
33
Multifunctional Settings (continued) Multifunctional Settings (continued)
OPTION Menu
With the  OPTION menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.
: SELECT
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORKVOLUME
SPEAKER
IR REMOTE
IR REMOTE ID
LAMP TIME
FILTER TIME
SERVICE
RESET16
TURN ON
1:    2:    3:
ALL
1234 h
4321 h
(This table is continued to the following page.)
     OPTION
  IR REMOTE
1 : FRONT
2 : TOP
3 : REAR
 ENT 
						

							34
Multifunctional Settings (continued) Multifunctional Settings (continued)
OPTION Menu (continued)
ItemDescription
SERVICE
Pressing the (or the ENTER) button calls the SERVICE menu. 
SERVICE Menu
Select an item using the  /  buttons, and press the (or the
ENTER) button to per form each function. :
FANSPEED 
AUTO ADJUST 
LENS TYPE 
LENS LOCK 
GHOST 
FILTER MESSAGE
FANSPEED
Select the fan speed level using the  /  buttons. : HIGH 
NORMAL
The HIGH ups rotation speeds of fans, though. Please use this
function in using a projector at highlands etc.
memo
Note that the projector is noisier when the HIGH is selected.
AUTO 
ADJUST
Select the ENABLE or the DISABLE using the  /  buttons. :ENABLE 
DISABLE
When the ENABLE is selected, detecting a signal change to a RGB
signal performs the automatic adjustment of the vertical position (V
POSITION), the horizontal position (H POSITION), the clock phase
(H PHASE) and the horizontal size (H SIZE).
Depending on conditions, such as input image, signal cable to the unit,
environment around the unit, etc., the automatic adjustment may not
work correctly.  In such a case, please choose DISABLE to disable the
automatic adjustment, and adjust manually.
LENS TYPE
Select the lens type currently used using the  /  buttons. :AUTO 
1 
2 
3 
4 
5
Please select depending on the following. 
AUTO: automatically selects optimum mode.
1: for a standard lens (Type NL-500 etc.)
2: for a fixed short throw lens (Type FL-501 etc.)
3: for a short throw lens (Type SL-502 etc.)
4: for a long throw lens (Type LL-503 etc.)
5: for a super long throw lens (Type LL-504 etc.)
memo
This setting has an influence on the keystone distortion etc. memoAbout the optional lens, ask your dealer.
LENS LOCKSelect the TURN ON or the TURN OFF using the  /  buttons. :
TURN ON 
TURN OFF
Selecting the TURN ON locks the adjustment of the lens shift, the zoom and the focus. 
GHOST1. Choose a color element of ghost using the bottons /  .
2. Adjust the chosen element using buttons  / to disappear ghost.
FILTER
MESSAGE
Use the  /  button to set the timer for the interval to show the message for cleaning up the air filter.100h
200h
300h
TURN OFF
50hAfter selecting 50h, 100h, 200h or 300h, the message “REMINDER …” will
appear after the timer reaches the interval time set by this operation. Please
refer to the FILTER TIME item  and the table Related message           .
When TURN OFF is chosen, the air filter cleaning message will not appear. Selecting TURN
OFF displays the message to call an attention to disabling the air filter cleaning message.
• Please check and clean the air filter periodically, even if there is no message. If
the air filter becomes blocked by dust or others, the internal temperature will rise,
which could cause malfunction, or reduce the lifetime of the projector.
• It is recommended to choose 100h in general. Please be careful with the operating environment
of the projector and the condition of air filter, especially when 200h, 300h or TURN OFF is chosen.
RESET
Select the EXECUTE using the button to reset the OPTION menu items. :
EXECUTE CANCEL
The items of the OPTION menu are collectively returned to the initial setting. 
Note that
the items “VOLUME”, “LAMP TIME”, “FILTER TIME” and “SERVICE” are not reset.
: SELECT
SERVICE
FANSPEED
AUTO ADJUST
LENS TYPE
LENS LOCK
GHOST
FILTER MESSAGE
NORMAL
ENABLE
AUTO
TURN OFF
100
 
						

							35
Multifunctional Settings (continued) Multifunctional Settings (continued)
NETWORK Menu
This projector provides the NETWORK function. If you use this
function, please set up the projector according to the Network
environment in which you use it.
memoIf DHCP function on your Network is activated, the following
operation is not normally required, because DHCP function on this projector
is active as initial settings.  Please see the section “Network Setting Up”.: SELECT
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORKSETUP
DHCP
INFORMATION
RESETTURN OFF
ItemDescription
SETUP
Press the (or the ENTER) button, then the IP
ADDRESS menu as right comes up. 
memoThis menu will be shown only when the DHCP
is disabled at the NETWORK menu.
The IP Address is identification number of the projector on the Network.
1. Set the IP Address using the  /  buttons. 
memoThe same IP Address with other units cannot be used.
Press the (or the ENTER) button at the IP
ADDRESS menu, then the SUBNET MASK menu
comes up. The SUBNET MASK is an address of the
Network.
2. Set the address of the Network to be used.
Press the (or the ENTER) button at the SUBNET
MASK menu, then the DEFAULT GATEWAY menu
comes up. The DEFAULT GATEWAY is the main
device to access outside of the Network.
3. Set the address of the device as gateway to an outer Network.
DHCP
Select the TURN ON or the TURN OFF using the  / 
buttons. :
TURN ON 
TURN OFF
If your Network doesn’t support the DHCP function, select the TURN OFF.
INFORMATION
Pressing the (or the ENTER) button displays the
INFORMATION menu. 
The menu shows the information about the current
Network setting as illustrated right.
RESETSelect the EXECUTE using the  button to reset the NETWORK menu items. :
EXECUTE CANCEL
All items on the NETWORK menu are returned to the initial setting.
:RETURNESCENT:NEXT
NETWORK - SETUP
IP ADDRESS
192 .   168 .     1 .      24
:RETURNESCENT:NEXT
NETWORK - SETUP
SUBNET MASK
255 .   255 .   255 .      1
:RETURNESCENT:NEXT
NETWORK - SETUP
DEFAULT GATEWAY
255 .   255 .   255 .      0
NETWORK-INFORMATION
 IP ADDRESS  192. 168. 1. 24
SUBNETMASK  255. 255. 255. 0
DEFAULT GATEWAY  255. 255. 255. 0
MAC ADRRESS  00. E0. 47. 03. 0C. D8
NETWORK
DHCP
TURN ON
TURN OFF 
						

							36
Network Setting Up Network Setting Up
This projector provides the NETWORK function. When you start to use this function,
please consult your dealer for further information.
To start, connect the NETWORK port to a gateway device via a CAT-5 cable, then set up
the projector according to the Network environment in which you use it.
When your Network enables the DHCP function
You can set automatically, if you set the DHCP function to TURN ON using the NETWORK
menu. Please refer to the section NETWORK Menu.
When your Network doesn’t support the DHCP function
or When you use a fixed address even if your Network can support the
DHCP function
Please set the IP Address, the Subnet Mask, the Default Gateway and the DHCP using
the NETWORK menu.        At first, set the DHCP function to “TURN OFF”.
You can set them using a Web Browser (Internet Explorer 4.0 or higher) on the computer
connected to the Network.
Input the same IP address as set to the projector onto the Web Browser on the computer
connected to LAN.
ex. Case of IP Address = 192.168.1.11
1) Input “http://192.168.1.11”.
2) Click “ENTER”.
3) Input the required data according to the screen.
4) Make sure of the input data, then click Write.
memoThese setting will be active after reboot. These
setting will be stored, and used when DHCP is OFF.
5) Click “Return to top page”.
6) Click “REBOOT” to complete this operation.
 
						

							37
Lamp Lamp
The projector uses a high-pressure mercury glass lamp. The lamp can break with aloud bang, or burn out,if jolted or scratched, handled while hot, or worn over time.
Note that each lamp has a different lifetime, and some may burst or burn out soon after
you start using them. In addition, when the bulb bursts, it is possible for shards of
glassto fly into the lamp housing, and for gas containing mercuryto escape from the
projector’s vent holes.
About disposal of a lamp• This product contains a mercury lamp; do not put in
trash. Dispose of in accord with environmental laws.
For lamp recycling, go to www.lamprecycle.org. (in the US) 
For product disposal, contact your local government agency or www.eiae.org (in the
US) or www.epsc.ca (in Canada). 
For more information, call your dealer.
• If the lamp should break (it will make a loud bang when it does), unplug
the power cord from the outlet, and make sure to request a replacement
lamp from your local dealer. Note that shards of glass could damage the
projector’s internals, or cause injury during handling, so please do not try
to clean the projector or replace the lamp yourself.
• If the lamp should break (it will make a loud bang when it does), ventilate
the room well, and make sure not to breathe the gas that comes out of
the projector vents, or get it in your eyes or mouth.
• Before replacing the lamp, make sure the power switch is off and the
power cable is not plugged in, then wait at least 45 minutes for the lamp
to cool sufficiently. Handling the lamp while hot can cause burns, as well
as damaging the lamp.
• Do not open the lamp cover while the projector is suspended from
above. This is dangerous, since if the lamp’s bulb has broken, the
shards will fall out when the cover is opened. In addition, working in high
places is dangerous, so ask your local dealer to have the lamp replaced
even if the bulb is not broken.
• Do not use the projector with the lamp cover removed. At the lamp
replacing, make sure that the screws are screwed in firmly. Loose
screws could result in damage or injury.
• Use only the lamp of the specified type DT00601
.
• If the lamp breaks soon after the first time it is used, it is possible that
there are electrical problems elsewhere besides the lamp. If this
happens, contact your local dealer or a service representative.
• Handle with care: jolting or scratching could cause the lamp bulb to
burst during use.
• If the indicators or a message prompts you to replace the lamp (see the
section “Related Messages” and “Regarding the indicator Lamps”),
replace the lamp as soon as possible. Using the lamp for long periods of
time, or past the replacement date, could cause it to burst. Do not use
old (used) lamps; this is a cause of breakage.
WARNINGHIGH VOLTAGE    HIGH TEMPERATURE    HIGH PRESSURE
Disconnect the
plug from the
power outlet 
						

							38
Lamp (continued) Lamp (continued)
After making sure that the projector has cooled
adequately, slide the knob of a lamp cover lock as
shown in the Figure. Then, one side of the lamp
cover is raised. Pull up the lamp cover and remove
it, as shown in the Figure. If the indicators or a message prompts you to replace the lamp, replace the lamp as soon
as possible.
Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at
least 45 minutes.
2
1
Contact your dealer to prepare a new lamp. Tell the dealer your lamp type number.
If the projector is mounted on the ceiling, or if the lamp has broken, also ask the
dealer to replace the lamp.
3
4Unscrew the 3 screws, and slowly pull out the lamp
by the handle. Be careful not to touch the inside of
the lamp case.
5Insert the new lamp, and tighten the 3 screws firmly
to lock it in place.
6Interlocking the 2 tabs of the lamp cover to the
projector, put the lamp cover on the projector. Then
push the point of the lamp cover to fix it, as shown in
the Figure. Make sure that the lamp cover does’t
come up.
7Turn on the projector, and reset the lamp timer.
(1) While the projector running, press the MENU button to open the menu.
(2) Choose the “OPTION” on the menu using the
/button, then press the
button or ENTER button.
(3) Choose the “LAMP TIME” using the
/button, then press the button or
RESET button.
(4) Choose the “RESET” using the button.
memoWhen the lamp has been replaced after the message of THE POWER WILL
TURN OFF AFTER 0hr. is displayed, complete this operation within 10 minutes of
switching power on.
memoIncorrectly resetting of the lamp timer (resetting without replacement, or
neglect of resetting after replacement) will result in incorrect message functions.
CO LAMPPC
INTERINPUTM1-DRGBBNG
S-VIDEO
STAND
BY/ONT
EMPVIDEOCOMPONENTL
AMPKEYSTONESEARCHRESETMENUFOCUSLENS SHIFTZOOM
Lamp cover Lamp cover
knob
Tabs
In the case of replacement by yourself,
INTERINPUTM1-DRGBBNG
S-VIDEO
STANDBY/ONTEMPVIDEOCOMPONENTLAMPKEYSTONESEARCHRESETMENUFOCUSLENS SHIFTZOOM
CO LAMPPC
CO LAMPPC
INTERINPUTM1-DRGBBNG
S-VIDEO
STANDBY/ONTEMPVIDEOCOMPONENTLAMPKEYSTONESEARCHRESETMENUFOCUSLENS SHIFTZOOM
Screws
CO LAMPPC
Replacing The Lamp