Dukane Imagepro 8979wu Users Manual

DUKANE CORP AV SERVICE DEPT 
2900 Dukane Drive
St Charles, IL 60174
800-676-2487 / 630-762-4032 
Fax  630-584-5156
[email protected]  
www.dukane.com/av
Information in this Guide may change due to product improvements. To obtain the latest 
manuals, literature, and software please visit the Dukane web site at;  \
www.dukane.com/av  
and look at the specific model SUPPORT or DOWNLOADS section.
LCD Data Video Projector
Concise User’s Manual
MODELS 8977, 8978W, 8979WU
403-8977, 8978W, 8979WU-Concise-00 

1
ENGLISH
Projector
8977/8978W/8979WU
User's Manual (concise)
Thank you for purchasing this projector.
Please read through this manual before using this product, in order to u\
se safely 
and utilize well the product.
WARNING  ►Before using this product, be sure to read all manuals for this 
product. After reading them, store them in a safe place for future reference.
►Heed all the warnings and cautions in the manuals or on the product.
►Follow all the instructions in the manuals or on the product....

2
First of  all
Entries and graphical symbols explanation
The following entries and graphical symbols are used for the manuals and\
 the product 
as follows, for safety purpose. Please know their meanings beforehand, a\
nd heed them.
Important safety instruction
The followings are important instructions for safely using the product. Be sure to 
follow them always when handling the product. The manufacturer assumes no 
responsibility for any damage caused by mishandling that is beyond normal usage...

4
Contents of  package
Your projector should come with the items 
shown below. Check that all the items are 
included. Require of your dealer immediately if 
any items are missing.
(1) Remote control with two AA batteries 
(2) Power cord 
(3) Computer cable
(4) 
 Lens cover
(5) 
 User’s manuals (Book x1, CD x1)
(6) Security label
(7) Application  CD
(8) Adapter  cover
NOTE

  • Keep the original packing materials for future reshipment. Be sure 
to use the original packing materials when moving the...

5
ENGLISH
Preparing for the remote control
Please insert the batteries into the remote control before using it. If \
the remote 
control starts to malfunction, try to replace the batteries. If you will\
 not use the 
remote control for long period, remove the batteries from the remote con\
trol and 
store them in a safe place.
1. Holding the hook part of the battery 
cover, remove it.
2. Align and insert the two AA batteries 
(HITACHI MAXELL ENERGY, Part 
No.LR6 or R6P) according to their plus 
and minus...

6
WARNING  ►Install the projector where you can access the power outlet 
easily.
►Install the projector in a stable horizontal position.
• 
 Do not use any mounting accessories except the accessories specified by the 
manufacturer. Read and keep the manuals of the accessories used.
• 
 For special installation such as ceiling mounting, be sure to consult your 
dealer beforehand. Specific mounting accessories and services may be 
required.
• Do not put the projector on its side, front or rear position.
•...

7
ENGLISH
Connecting with your devices
Before connecting the projector to a device, consult the manual of the device to 
confirm that the device is suitable for connecting with this projector and prepare 
the required accessories, such as a cable in accord with the signal of t\
he device. 
Consult your dealer when the required accessory did not come with the pr\
oduct or 
the accessory is damaged.
After making sure that the projector and the devices are turned off, perform the 
connection, according to...

8
Connecting power supply
1. Put the connector of the power cord into the AC (AC 
inlet) of the projector.
2. Firmly plug the power cord’s plug into the outlet. In a 
couple of seconds after the power supply connection, 
the POWER indicator will light up in steady orange.
Please remember that when the DIRECT POWER ON 
function activated, the connection of the power supply 
make the projector turn on.
WARNING  ►Do not connect the projector to a power supply while no lens 
unit is attached to it.
►Please...

9
ENGLISH
Turning on the power
1. Make sure that the power cord is firmly and correctly connected to the 
projector and the outlet.
2. Make sure that the POWER indicator is 
lighted in steady orange. Then remove the 
lens cover.
3. Press the STANDBY/ON button on 
the projector or the ON button on the 
remote control.
The projection lamp will light up and the 
POWER indicator will begin blinking in 
green. When the power is completely on, the 
indicator will stop blinking and light in steady 
green....