Dukane Imagepro 8973w Projector Users Manual

11
ENGLISH
Displaying the picture
1. Activate your signal source. Turn the signal 
source on, and make it send the signal to the 
projector.
2. Use the VOL + / -  buttons to adjust the volume. 
3. Press the INPUT button on the projector. 
Each time you press the button, the projector 
switches its input port in turn.
You can also use the remote control to select 
an input signal. Press any of the buttons from 
COMPUTER 1 / 2, LAN, USB TYPE A /  B, 
HDMI 1 / 2, COMPONENT, S-VIDEO or 
VIDEO to select the...

12
Turning off  the power
1. Press the STANDBY/ON button on the 
projector or the STANDBY button on 
the remote control. 
The message “Power off?” will appear   
on the screen for about 5 seconds.
2. Press the STANDBY/ON or STANDBY 
button again while the message 
appears. 
The projector lamp will go off, and the 
POWER indicator will begin blinking in 
orange. Then the POWER indicator will 
stop blinking and light in steady orange 
when the lamp cooling is complete.
3. Attach the lens cover, after the...

13
ENGLISH
Replacing the lamp
A lamp has finite product life. Using the lamp for long periods of time could cause 
the pictures darker or the color tone poor. Note that each lamp has a different 
lifetime, and some may burst or burn out soon after you start using them\
. 
Preparation of a new lamp and early replacement are recommended. To prepare 
a new lamp, make contact with your dealer and tell the lamp type number.Type number  : 456-8970  
Type number  : 456-8971
1. Turn the projector off, and unplug...

14
 HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE
WARNING  ►The projector uses a high-pressure mercury glass lamp. The 
lamp can break with a loud bang, or burn out, if jolted or scratched, ha\
ndled 
while hot, or worn over time. Note that each lamp has a different lifetime, and 
some may burst or burn out soon after you start using them. In addition,\
 if the 
bulb bursts, it is possible for shards of glass to fly into the lamp housing, and 
for gas containing mercury and dust containing fine particles...

15
ENGLISH
Please check and clean the air filter periodically. When the indicators or a 
message prompts you to clean the air filter, comply with it as soon as possible.
The filter unit with 2 sheets of filters is inside of the filter cover . In addition, the 
extra air filter is attached to inner side of the filter cover of 8971 , 8973W 
and 8975WU . If one of the filters is damaged or heavily soiled, replace whole 
filter set with a new one.
Request for a filter set with the following type number from...

16
NOTE  • Please reset the filter time only when you have cleaned or 
replaced the air filter, for a suitable indication about the air filter.
• The projector may display the message such as the “CHECK THE AIR 
FLOW” or turn off the projector, to prevent the internal heat level rising.
WARNING   ► Before taking care of the air filter, make sure the power 
cable is not plugged in, then allow the projector to cool sufficiently .
►Use only the air filter of the specified type. Do not use the projector...

17
ENGLISH
Using the CD manual
The other manuals for this product are written into the included CD-ROM \
titled 
“User’s Manual (detailed)”. Before using the CD-ROM, please read the following 
to ensure the proper use. 
 System requirements
The system for using the CD-ROM requires the following. 
  Windows®:   OS:Windows® XP, Windows Vista®, Windows® 7 or later
  Macintosh®:  OS:Mac OS® 10.2 or later
  CD-ROM/DVD-ROM drive
  Applications:    Microsoft
® Internet Explorer®6.0 and
  Adobe® Acrobat® Reader®...

18
ItemSpecification
Product name Liquid crystal projector
Liquid Crystal 
Panel 8970, 8971
:
  
786,432 pixels (1024 horizontal x 768 vertical)
8972W, 8973W:
  
1,024,000 pixels (1280 horizontal x 800 vertical)
8976SX
:   
1,470,000 pixels (1400 horizontal x 1050 vertical)
8974WU
, 8975WU:   
2,304,000 pixels (1920 horizontal x 1200 vertical)
Lamp
8970, 8972W, 8974WU: 245W UHP
8971, 8973W, 8976SX, 8975WU: 330W UHP
Speaker 8 W x2
Power supply, 
Rated current 8970
, 8972W, 8974WU: 
AC100-120 V: 3.8 A,...

19
ENGLISH
ItemSpecification
Ports COMPUTER IN1 
 ..........................  D-sub 15 pin mini jack x1
COMPUTER IN2 (H, V, G/Y, B/Cb/Pb, R/Cr/Pr)  ...
 BNC jack x5
HDMI 1  ...................................................  HDMI connector x1
HDMI 2 
 ...................................................  HDMI connector x1
MONITOR OUT 
 ............................. D-sub 15 pin mini jack x1
COMPONENT (Y, Cb/Pb, Cr/Pr) 
 .......................  RCA jack x3
S-VIDEO...

20
Troubleshooting - Warranty and after-ser vice
If an abnormal operation (such as smoke, strange odor or excessive soun\
d) 
should occur, stop using the projector immediately. 
Otherwise if a problem occurs with the projector, first refer to “Troubleshooting” of 
User’s Manual - Operating Guide, Instant Stack Guide and Network Guide, 
and run through the suggested checks. 
If this does not resolve the problem, please consult your dealer or serv\
ice 
company. They will tell you what warranty condition...