Dukane Imagepro 8973w Projector Users Manual

1
ENGLISH
Projector
8970/8971/8972W/8973W 
8976SX/8974WU/8975WU
C
User's Manual (concise)
Thank you for purchasing this projector.
Please read through this manual before using this product, in order to u\
se safely 
and utilize well the product.
WARNING  ►Before using this product, be sure to read all manuals for this 
product. After reading them, store them in a safe place for future reference.
►Heed all the warnings and cautions in the manuals or on the product.
►Follow all the instructions in the...

2
First of  all
Entries and graphical symbols explanation
The following entries and graphical symbols are used for the manuals and\
 the product 
as follows, for safety purpose. Please know their meanings beforehand, a\
nd heed them.
Important safety instruction
The followings are important instructions for safely using the product. Be sure to 
follow them always when handling the product. The manufacturer assumes no 
responsibility for any damage caused by mishandling that is beyond normal usage...

3
ENGLISH
Regulator y notices
About Electro-Magnetic Interference
This is a Class A product. In a domestic environment this product may cause 
radio interference in which case the user may be required to take adequa\
te 
measures.
This product may cause interference if used in residential areas. Such u\
se must 
be avoided unless the user takes special measures to reduce electromagne\
tic 
emissions to prevent interference to the reception of radio and televisi\
on 
broadcasts.
In Canada
This Class A...

4
Contents of  package
Your projector should come with the items 
shown below. Check that all the items are 
included. Require of your dealer immediately if 
any items are missing.
(1) Remote control with two AA batteries 
(2) Power cord 
(3) Computer cable
(4)  Lens cover
(5)   User’s manuals (Book x1, CD x1)
(6) Security label
(7) Application CD
(8) Adapter cover
NOTE  • Keep the original packing materials for future reshipment. 
Be sure to use the original packing materials when moving the projector ....

5
ENGLISH
Preparing for the remote control
Please insert the batteries into the remote control before using it. If \
the remote 
control starts to malfunction, try to replace the batteries. If you will\
 not use the 
remote control for long period, remove the batteries from the remote con\
trol and 
store them in a safe place.
1. Holding the hook part of the battery 
cover, remove it.
2. Align and insert the two AA batteries 
(HITACHI MAXELL or HITACHI 
MAXELL ENERGY, Part No.LR6 or 
R6P) according to...

6
WARNING  ►Install the projector where you can access the power outlet 
easily.
►Install the projector in a stable horizontal position.
•   Do not use any mounting accessories except the accessories specified by the 
manufacturer. Read and keep the manuals of the accessories used.
•   For special installation such as ceiling mounting, be sure to consult your 
dealer beforehand. Specific mounting accessories and services may be 
required.
• Do not put the projector on its side, front or rear position.
•...

7
ENGLISH
Connecting with your devices
Before connecting the projector to a device, consult the manual of the device to 
confirm that the device is suitable for connecting with this projector and prepare 
the required accessories, such as a cable in accord with the signal of t\
he device. 
Consult your dealer when the required accessory did not come with the pr\
oduct or 
the accessory is damaged.
After making sure that the projector and the devices are turned off, perform the 
connection, according to...

8
Connecting power supply
1. Put the connector of the power cord into the AC IN 
(AC inlet) of the projector.
2. Firmly plug the power cord’s plug into the outlet. In a 
couple of seconds after the power supply connection, 
the POWER indicator will light up in steady orange.
Please remember that when the DIRECT POWER ON 
function activated, the connection of the power supply 
make the projector turn on.
WARNING  ►Do not connect the projector to a power supply while no lens 
unit is attached to it....

9
ENGLISH
Turning on the power
1. Make sure that the power cord is firmly and correctly connected to the 
projector and the outlet.
2. Make sure that the POWER indicator is 
lighted in steady orange. Then remove the 
lens cover.
3. Press the STANDBY/ON button on 
the projector or the ON button on the 
remote control.
The projection lamp will light up and the 
POWER indicator will begin blinking in 
green. When the power is completely on, the 
indicator will stop blinking and light in steady 
green....

10
Adjusting the projector’s elevator
When the place to put the projector is slightly uneven to 
the left or right, use the elevator feet to place the projector 
horizontally. Using the feet can also tilt the projector 
in order to project at a suitable angle to the screen, 
elevating the front side of the projector within 9 degrees.
This projector has 2 elevator feet and 2 elevator buttons. 
An elevator foot is adjustable while pushing the elevator 
button on the same side as it.
1. 
Holding the...