Dukane Imagepro 8958a Users Manual

DUKANE CORP AV SERVICE DEPT 
2900 Dukane Drive
St Charles, IL 60174
800-676-2487 / 630-762-4032 
Fax  630-584-5156
[email protected]  
www.dukane.com/av
Information in this Guide may change due to product improvements. To obtain the latest 
manuals, literature, and software please visit the Dukane web site at;  \
www.dukane.com/av  
and look at the specific model SUPPORT or DOWNLOADS section.
LCD Data Video Projector
Concise User’s Manual
MODELS 
       8958A, 8959A, 8957WA...

1
ENGLISH
WARNING  ►Before using this product, be sure to read all manuals for this 
product. After reading them, store them in a safe place for future reference.
►Heed all the warnings and cautions in the manuals or on the product.
►Follow all the instructions in the manuals or on the product.

First of all  ............................................ 2
  Entries and graphical symbols explanation  ...... 2
  Important safety instruction  ..............................2
Regulatory notices...

2
First of  all
Entries and graphical symbols explanation
The following entries and graphical symbols are used for the manuals and the 
product as follows, for safety purpose. Please know their meanings beforehand, 
and heed them.
Important safety instruction
The followings are important instructions for safely using the product. Be sure to 
follow them always when handling the product. The manufacturer assumes no 
responsibility for any damage caused by mishandling that is beyond normal usage 
defined...

3
ENGLISH
Regulator y notices
About Electro-Magnetic InterferenceIn CANADA
This Class B digital apparatus complies with Canadian ICES-003.
In the US, and other places where the FCC regulations are applicable
Declaration of Conformity Trade name
 HITACHI/DUKANE
Model Number
   CP-X4022WN/8958A, CP-X5022WN/8959A, CP-WX4022WN/8957WA
Responsible Party
 Hitachi America, Ltd.
Address
 900 Hitachi way, Chula Vista, CA 91914-3556  U.S.A.
Telephone Number
 +1 -800-448-2244
This device complies with part 15 of the...

4
NOTE  • Keep the original packing materials for future reshipment. Be sure 
to use the original packing materials when moving the projector. Use special 
caution for the lens.
• The projector may make a rattling sound when tilted, moved or shaken, since 
a fl ap to control the air fl ow inside of the projector has moved. Be aware that 
this is not a failure or malfunction.
About Waste Electrical and Electronic Equipment
The mark is in compliance with the Waste Electrical and Electronic 
Equipment...

5
ENGLISH
Preparing for the remote control
Please insert the batteries into the remote control before using it. If the remote 
control starts to malfunction, try to replace the batteries. If you will not use the 
remote control for long period, remove the batteries from the remote control and 
store them in a safe place.
1. Holding the hook part of the battery 
cover, remove it.
2. Align and insert the two AA batteries 
(
HITACHI MAXELL ENERGY, Part 
No.LR6 or R6P
) according to their plus 
and minus...

6
WARNING  ►Install the projector where you can access the power outlet 
easily.
►Install the projector in a stable horizontal position.
•   Do not use any mounting accessories except the accessories specifi  ed by the 
manufacturer. Read and keep the manuals of the accessories used.
•  
For special installation such as ceiling mounting, be sure to consult your dealer 
beforehand. Specifi c mounting accessories and services may be required.
• Do not put the projector on its side, front or rear position....

7
ENGLISH
Connecting with your devices
Before connecting the projector to a device, consult the manual of the device to 
confirm that the device is suitable for connecting with this projector and prepare 
the required accessories, such as a cable in accord with the signal of the device. 
Consult your dealer when the required accessory did not come with the product or 
the accessory is damaged.
After making sure that the projector and the devices are turned off, perform the 
connection, according to the...

8
Connecting power supply
1. Put the connector of the power cord into the 
AC IN (AC inlet) of the projector.
2. Firmly plug the power cord’s plug into the 
outlet. In a couple of seconds after the power 
supply connection, the  POWER indicator will 
light up in steady orange.
Please remember that when the DIRECT POWER 
ON function activated, the connection of the power 
supply make the projector turn on.
WARNING  ►Please use extra caution when connecting the power cord, as 
incorrect or faulty...