Dukane Imagepro 8943a Projector Users Manual

							
7

Troubleshooting
• Although bright spots or dark spots may appear on the screen, this 
is a unique characteristic of liquid crystal displays, and it does not constitute or 
imply a machine defect.
NOTE
PhenomenonCases not involving a machine defectReference
page
Video screen
display freezes.
The FREEZE function is working.
Press the FREEZE button to restore the screen to normal.
Colors have a
faded- out
appearance, or
Color tone is 
poor.
Color settings are not correctly adjusted.
Perform picture adjustments by changing the COLOR 
TEMP, COLOR, TINT and/or COLOR SPACE settings, 
using the menu functions.
25, 27, 
3 
COLOR SPACE setting is not suitable.
Change the COLOR SPACE setting to AUTO, RGB, 
SMPTE240, REC709 or REC601.  3 
Pictures appear 
dark.
The brightness and/or contrast are adjusted to an 
extremely low level.
Adjust BRIGHTNESS and/or CONTRAST settings to a 
higher level using the menu function.
25, 26
The WHISPER function is working.
Select NORMAL for the WHISPER item in the SETUP 
menu.
25, 36
The lamp is approaching the end of its product 
lifetime.
Replace the lamp.
60, 61
Pictures appear
blurry.
Either the focus and/or horizontal phase settings are 
not properly adjusted.
Adjust the focus using the focus ring, and/or H PHASE 
using the menu function.
19, 30
The lens is dirty or misty.
Clean the lens referring to the section “Caring for the lens”.65
Pictures are 
trembling.
The exhaust ventilation holes at front is blocked by 
some objects.
Remove any objects from front side of the projector.
4
Phenomena that may be easily mistaken for machine defects (continued) 
						

							
7

Warranty and after-ser vice / Specifications
Warranty and after-service
If a problem occurs with the equipment, first refer to the “Troubleshooting” and 
run through the suggested checks. If this does not resolve the problem, please 
contact your dealer or service company. They will tell you what warranty condition 
is applied.
Specifications
• These specifications are subject to change without notice.NOTE

ItemSpecifications
Product nameLiquid crystal projector
Liquid
Crystal
Panel
Panel size2.0cm (0.79 type)
Drive systemTFT active matrix
Pixels786,432 pixels (1024 horizontal x 768 vertical)
LensZoom lens F=1.7 ~ 1.9  f=24 ~ 29 mm (approx.)
Lamp275W UHB
Audio output4W x 4
Power supplyAC 100-120V/5.0A, AC220-240V/2.1A
Power consumption460W
Temperature range5 ~ 35°C (Operating)
Size
418 (W) x 139 (H) x 319 (D) mm
(Not including protruding parts)
* Please refer to the following figure.
Weight (mass)7.1kg (approx.)
Ports
RGB1    .....................................................D-sub 15 pin mini x 1RGB2 G/Y, B/CB/PB, R/CR/PR, H, V  .............................BNC x 5S-VIDEO    ......................................................mini DIN 4 pin x 1VIDEO   ........................................................................RCA x 1Y, CB/PB, CR/PR (component video)    ............................RCA x 3HDMI   .........................................................................HDMI x1AUDIO IN1 .......................................................Stereo mini x 1AUDIO IN2 .......................................................Stereo mini x 1AUDIO IN3 R/L    ...........................................................RCA x 1AUDIO IN4 R/L   ...........................................................RCA x 1RGB OUT  ...............................................D-sub 15 pin mini x 1AUDIO OUT    .....................................................Stereo mini x 1USB   ......................................................................USB (B) x 1REMOTE CONTROL    ........................................Stereo mini x1CONTROL   .......................................................D-sub 9 pin x 1LAN ............................................................................RJ45 x 1
Optional parts
Lamp: 456-8948
Air filter: MU03642
* For more information, please consult your dealer. 
						

							
73

Specifications
Specifications (continued)
[unit: mm]
4 8
3 9

54

39