Dukane Imagepro 8943a Projector Users Manual

5

OPTION Menu
ItemDescription
SECURITY(continued)
4. Using the Transition Detector Function
While the Transition Detector function is ON, when power switch is started to supply to the projector, it might react as below.• Transition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed.• Transition Detector alarm might appear on screen, if the MIRROR setting has been changed.• Keystone adjustment feature has been prohibited as long as the  Transition...

5

OPTION Menu
ItemDescription
SECURITY(continued)
4.3 Setting the Transition Detector off
4.3-1   Follow the procedure in 4.1-1 to display the Transition Detector on/off menu.
4.3-2 
 
Select TURN OFF to display the ENTER PASSWORD BOX (large). 
Enter the registered PASSWORD and the screen will return to the Transition Detector on/off menu.If an incorrect PASSWORD is input the menu will close. If necessary repeat the process from 4.3-1.
4.4 If you have forgotten your PASSWORD
4.4-1   Follow the...

53

ItemDescription
SECURITY(continued)
5.2 Displaying the MY TEXT
(1)  Use the ▲/▼ buttons on the SECURITY menu to select the MY TEXT DISPLAY menu and press the ► button to display the MY TEXT DISPLAY on/off menu.
(2) 
 
Use the ▲/▼ buttons on the MY TEXT DISPLAY 
on/off menu to select on or off.
TURN ON ó TURN OFF
When it is set TURN ON, the MY TEXT will be displayed on the START UP screen. Whichever is selected, the MY TEXT will be displayed on the INPUT-INFORMATION when the INFORMATION on the...

54

OPTION Menu
ItemDescription
SECURITY(continued)
5.3-3  Turning the MY TEXT PASSWORD off
(1)   Follow the procedure in 5.3-1 to display the MY 
TEXT PASSWORD on/off menu.
(2) 
 
Select TURN OFF to display the ENTER 
PASSWORD BOX (large). Enter the registered PASSWORD and the screen will return to the MY TEXT PASSWORD on/off menu. If an incorrect PASSWORD is input, the menu will close. If necessary, repeat the process from 5.3-3(1)
5.3.4 If you have forgotten your PASSWORD.
(1)   Follow the procedure...

55

Remember that incorrect network settings on this projector 
may cause trouble on the network. Be sure to consult with 
your network administrator before connecting to an existing 
access point on your network.
Select “NETWORK” from the main menu to access the 
following functions. 
Select an item using the ▲/▼ cursor buttons on the projector or remote control, 
and press the ► cursor button on the projector or remote control, or ENTER 
button on the remote control to execute the item. Then perform...

56

NETWORK Menu
NETWORK Menu (continued)
ItemDescription
SETUP(continued)
IP ADDRESS
Use the ▲/▼/◄/► buttons to enter the IP ADDRESS. This function can only be used when DHCP is set to OFF.
• The IP ADDRESS is the number that identifies this projector on the network. You cannot have two devices with the same IP ADDRESS on the same network.• The IP ADDRESS “0.0.0.0” is prohibited.
SUBNET MASK
Use the ▲/▼/◄/► buttons to enter the same SUBNET MASK used by your PC. This function can only be used when DHCP...

57

NETWORK Menu
NETWORK Menu (continued)
ItemDescription
PROJECTOR NAME(1)   Use the▲/▼ buttons on the NETWORK menu to select the 
PROJECTOR NAME menu and press the ► button. The PROJECTOR NAME dialog will be displayed.
(2) 
 
The current PROJECTOR NAME 
will be displayed on the first 3 lines. If not yet written, the lines will be blank. Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter characters. The RESET button can be used to erase 1 character at a time. Also if you move the...

58

NETWORK Menu
NETWORK Menu (continued)
ItemDescription
e-SHOT 
Selecting this item displays the e-SHOT menu. The application software “PJTransfer” is required to store image(s) into the projector.Use the ▲/▼ buttons to select an item which is a still image by the e-SHOT ( e-SHOT (Still Image Transfer) Display of the User’s Manual - Network Guide) and the ► or ENTER button to display the image.
• The item without image stored cannot be selected.• The image names are each displayed in 16 characters or...

59

NETWORK Menu
NETWORK Menu (continued)
ItemDescription
INFORMATION
Selecting this item displays the NETWORK -INFORMATION- dialog for confirming the network settings.
• The PROJECTOR NAME is displayed.• Nothing (blank) is shown in the “PROJECTOR NAME” field until you setup the item (57).• When the voltage level of the battery for the built in clock decreases, the set time may become incorrect even though accurate date and time are input. Replace the battery suitably (64).• IP ADDRESS, SUBNET MASK...

60

Maintenance 
Maintenance
A lamp has finite product life. Using the lamp for long periods of time could cause 
the pictures darker or the color tone poor. Note that each lamp has a different 
lifetime, and some may burst or burn out soon after you start using them. 
Preparation of a new lamp and early replacement are recommended. To prepare 
a new lamp, contact your dealer and tell the lamp type number.
Lamp
Type number = 456-8948
1.Turn the projector off, and unplug the power cord. 
Allow the...