Dukane Imagepro 8942 Liquid Crystal Projector Users Manual

							9
Setting Up (continued) Setting Up (continued)
Please refer to the following (for example) for connecting your devices. See the rear of the projector.
You can see the ports.
INTERIN
PU
TM
1
-
DRG
BBNG
S
-V
IDE
OS
TA
ND
BY/
ONT
EM
PVID
EOCO
MPO
NE
N
TLAM
PKE
YS
TONESEARC
HRES
ETMEN
UF
OC
U
SL
EN
S SH
IF
TZO
O
M
  V
ID
E
O R
-
A
UD
IO
 IN
-
LS
-V
ID
E
O
BNC RGB A
UD
I
O
 
IN1
A
UD
IO
 IN2
RGB OUTA
UD
IO
 
OUT REMO
TE
 CONTROL
R/CR/PRG/YB/CB/PBH
VY 
CONTROL NETWORK
CR/
PRCa
/Pa
 R/CR/PR G/Y B/CB/PB H V
Examples of connection with a computer
  VIDEO R-AUDIO IN-LS-VIDEOBNC RGB AUDIO IN1
AUDIO IN2
RGB OUTAUDIO OUT REMOTE CONTROL
R/C
R/PRG/Y B/CB/PBHVY CONTROL
 NETWORK
CR/PR
Ca/PaAE
FG
REMOTE CONTROL
  VIDEO R-AUDIO IN-LS-VIDEOBNC RGB AUDIO IN1
AUDIO IN2
RGB OUTAUDIO OUT
G/Y H VY CONTROL
 NETWORK
CR/PR
Ca/Pa
R/CR/PRB/CB/PB
BD
REMOTE CONTROL
  VIDEO R-AUDIO IN-LS-VIDEOBNC RGB AUDIO IN1
AUDIO IN2
RGB OUTAUDIO OUT
R/C
R/PRG/Y B/CB/PBHVY CONTROL
 NETWORK
CR/PR
Ca/Pa
C
D
ComputerProjector
RGB out RGB cableRGB
Audio out Stereo Mini cableAUDIO IN 2
RS-232C port RS-232C cableCONTROL
Network port CAT-5 cableNETWORK
■If using a M1-D input (to mouse control)
■If using a BNC input
DVI portM1-D
USB port M1-D cable
Audio out Stereo Mini cableAUDIO IN 1
BNC cable RGB outR/C
R/PR
G/Y
B/C
B/PB
H
V
C D B G F E A
D
Audio out Stereo Mini cableAUDIO IN 1
$19&/(0(~
						

							10
Setting Up (continued) Setting Up (continued)
  VIDEO R-AUDIO IN-LS-VIDEOBNC RGB AUDIO IN1
AUDIO IN2
RGB OUTAUDIO OUT
R/C
R/PRG/Y B/CB/PBHVY CONTROL
 NETWORK
CR/PR
Ca/Pa
REMOTE CONTROL
HI
REMOTE CONTROL
  VIDEO R-AUDIO IN-LS-VIDEOBNC RGB AUDIO IN1
AUDIO IN2
RGB OUTAUDIO OUT
R/C
R/PRG/Y B/CB/PBHVY CONTROL
 NETWORK
CR/PR
Ca/Pa
HJ
REMOTE CONTROL
  VIDEO R-AUDIO IN-LS-VIDEOBNC RGB AUDIO IN1
AUDIO IN2
RGB OUTAUDIO OUT
R/C
R/PRG/Y B/CB/PBHVY CONTROL
 NETWORK
CR/PR
Ca/Pa
H
K
VCR/DVD PlayerProjector
■If using a s-video signal
■If using a component signal
R-AUDIO IN-L VIDEO
R-AUDIO IN-L VIDEO
 COMPONENT
S-video out S-video cableS -VIDEO
J
CR/PR
CB/PB
Y C
R/PRout
C
B/PBout
Y out
R-AUDIO IN-L VIDEOR-AUDIO IN
AUDIO IN-LAudio out (R)
Audio out (L) Audio out (R)
Audio out (L)
R-AUDIO IN
AUDIO IN-L R-AUDIO IN
AUDIO IN-L
VIDEO IN
Audio out (R)
Audio out (L)
Video outH
H
K
H
REMOTE CONTROL
  VIDEO R-AUDIO IN-LS-VIDEOBNC RGB AUDIO IN1
AUDIO IN2
RGB OUTAUDIO OUT
R/C
R/PRG/Y B/CB/PBHVY CONTROL
 NETWORK
CR/PR
Ca/Pa
HI
K
■If using a SCART RGB input
 COMPONENT
R-AUDIO IN-L VIDEOR (CR/PR)
B (C
B/PB)
G (Y)
R-AUDIO IN
AUDIO IN-L
VIDEO IN SCART 
RGB out
SCART 
adapterK
I H I
Examples of connection with a VCR/DVD Player
$19&/(0(~
						

							INTERIN
PU
TM1-DRGBB
NG
S-VID
EOS
TA N
DBY
/O
NTEM
PVI
DE
OCOM
PONENTLAMPKEYST
ON
ESEARC
HR
ESE
TM
E
NUF
OCUSL
E
NS SHIF
TZ
O
OM
  VID
EO R
-A
UD
IO
 IN
-LS-VIDE
O
BNC RGB A
UDIO IN1
A
UD
IO
 IN2
RGB OUTA
UDIO OUT REMOTE CONTROL
R/CR/PRG/YB/CB/PBH
VY CONTROL NETWORK
CR/PRCa/Pa
11
Setting Up (continued) Setting Up (continued)
REMOTE CONTROL
  VIDEO R-AUDIO IN-LS-VIDEOBNC RGB AUDIO IN1
AUDIO IN2
RGB OUTAUDIO OUT
R/C
R/PRG/Y B/CB/PBHVY CONTROL
 NETWORK
CR/PR
Ca/PaL
REMOTE CONTROL
  VIDEO R-AUDIO IN-LS-VIDEOBNC RGB AUDIO IN1
AUDIO IN2
RGB OUTAUDIO OUT
R/C
R/PRG/Y B/CB/PBHVY CONTROL
 NETWORK
CR/PR
Ca/PaM
MonitorProjector
RGB in RGB cableRGB OUT
Connecting to a monitor
SpeakerProjector
Connecting to a speaker (with amplifier)
Audio in Stereo Mini cableAUDIO OUTM L
WARNING• Use extra caution when connecting the power cord as incorrect or faulty
connections may result in fire and/or electrical shock. Please adhere to the “User’s manual –
Safety Guide” and the following. 
• Only plug the power cord into outlets rated for use with the power cord’s specified voltage range.• Only use the power cord that came with the projector. If it is damaged, contact your dealer to
newly get correct one.
• Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug.• Make sure that you firmly connect the power cord to the projector and wall outlet.
1Connect the connector of the power cord to
the AC inlet of the projector.
2Firmly plug the power cord’s plug into the
outlet.
AC Inlet
Connector PlugOutlet
Connecting The Power Supply
$19&/(0(~
						

							12
Remote Control Remote Control
About The Laser Pointer
Putting Batteries
WARNING• The laser pointer of the remote control is used in place of a finger or
rod. Never look directly into the laser beam outlet or point the laser beam at other
people. The laser beam can cause vision problems.
CAUTION
•Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
STANDBY/ONVIDEOLASER INDICATOR
ESC MENUPOSITIONRESET AUTO
KEYSTONE1  2  3
ID CHANGESEARCHON
OFFFREEZE MUTEMAGNFYPinPVOLUME
RGB
BLANK
PREVIOUSNEXT ASPECT ENTER
LASERLENS SHIFT+
–––++FOCUS ZOOM
JQA  MADE IN CHINAP S
C

						

							STANDBY/ONVIDEOLASER INDICATOR
ESC MENUPOSITIONRESET AUTO
KEYSTONE1  2  3
ID CHANGESEARCH
ON
OFFFREEZE MUTEMAGNFYPinPVOLUME
RGB
BLANK
PREVIOUSNEXT ASPECT ENTER
LASERLENS SHIFT+
–––++FOCUS ZOOM
13
Remote Control (continued) Remote Control (continued)
Operating The Remote Control
CAUTION• Do not disassemble the remote control. 
• Do not place the remote control near the projector’s lens, fan, or vents.
• Do not drop or otherwise expose the remote control to physical impact.
• 
Do not get the remote control wet or place it on wet objects on it. Doing so may result in malfunction.
• Remove the batteries from the remote control and store them in a safe place if you
wont be using the remote control for an extended period. 
• Replace the batteries whenever the remote control starts to malfunction.
• 
When strong light, such as direct sunlight or light from an extremely close range (such as from an
inverter fluorescent lamp), hits the projectors remote sensor, the remote control may cease to function.
Adjust the direction of the projector to keep light from directly hitting the projectors remote sensor.
NOTE
• The remote control works with the
projector’s remote sensor.
• Front remote sensoris 3 meters with a 60
degree range (30 degrees to the left and
right of a remote sensor).
Rear remote sensoris 3 meters with a 40
degree range (20 degrees to the left and
right of a remote sensor).
•Also a remote signal reflected in the screen etc.
may be available. If it is difficult to send a remote signal to the sensor directly, please try.
• Since the remote control uses infrared light to send signals to the projector (Class1 LED), be sure to use the
remote control in an area free from obstacles that could block the remote control’s output signal to the projector.
memoYou can use the remote control as a wired remote control, by connecting the REMOTE CONTROL
ports of the main unit and remote control via an audio cable (3.5 dia. stereo mini cable with plugs).
Set the ID number to the projector beforehand,
referring to the item “IR REMOTE ID” of the section
“OPTION Menu”.
memoWhen the ALL is selected to the item “IR
REMOTE ID” of the OPTION menu, the projector is
controlled by a remote control irrespective of the
position of the ID CHAGE switch. 
Slide the knob of the switch into the position of the
ID number of the projector you want to control.
Using The Remote ID Feature
This is the function to properly use when you use two or
three same type projectors at the same time. This function
should be used combining a setup of a projector.
ID CHANGE
switch
I
N
T
E
R I
N
P
U
TM
1
-
DR
G
BB
N
GS
-
V
I
D
E
OS
T
AN
D
B
Y
/O
NTEMPV
I
D
E
OCOMPONENTLAMPK
E
Y
S
TO
N
ES
E
A
R
C
HR
E
S
ETM
E
N
UF
O
C
U
SLE
N
S
 
SH
IF
TZO
O
MINT
ER I
NPUTM1-DRGBBNGS-VIDEOS
T
A
N
D
B
Y
/
O
NTEMPVIDEOCOMPONENTLAMPK
E
Y
S
T
O
N
ES
E
A
R
C
HR
E
S
E
TM
E
N
UF
O
C
U
SL
E
N
S
 
S
H
I
F
TZ
O
O
M
  
VIDEO R-AUDIO IN-L
S-VIDEOBNC RGB AUD
IO IN1
AUD
IO IN2
RGB OUTAUD
IO OUT REMOTE CO
NTROL
R/CR/PRG/YB/CB/PBH
VY CONTROL
 NETWORKCR/PR
Ca/Pa
approximately
3 meters30 degrees30 degreesapproximately
3 meters20 degrees20 degrees
1
2
$19&/(0(~
						

							STANDBY/ONVIDEOLASER INDICATOR
ESC MENUPOSITIONRESET AUTO
KEYSTONE1  2  3
ID CHANGESEARCH
ON
OFFFREEZE MUTEMAGNFYPinPVOLUME
RGB
BLANK
PREVIOUSNEXT ASPECT ENTER
LASERLENS SHIFT+
–––++FOCUS ZOOM
14
Remote Control (continued) Remote Control (continued)
Using The Mouse/Keyboard Control Function
CAUTION• Before connecting, read the manuals of the device you will connect.
Mistaken use of the mouse/keyboard control could damage your equipment.
• Only connect to a PC.
• Do not unplug the connector cables while the computer is operating.
Using the USB control feature, you can use the remote control as a simplified mouse or
keyboard of the computer.
Connect the M1-D port of the projector to the computer via the M1-D cable. Then
functions illustrated below will be enabled.
memoThe USB control can be used with
Windows 95 OSR 2.1 or higher. It may not be
possible to use the remote control, depending
on the computer’s configurations and mouse
drivers.
memoThe function can be used only for the
functions illustrated on the right.
memoThe projector would be enumerated as a
mouse and a keyboard of HID (Human
Interface Device) class devices, after
connecting cable.
Mouse move pointer
Keyboard
Arrow keys  / / /
Mouse right button
Keyboard  ESC  key
(Front)
(Rear) Mouse left button
$19&/(0(~
						

							STANDBY/ONVIDEOLASER INDICATORRGB
SCSLENS SHIFT+
–––++FOCUS ZOOM
I
N
T
E
RI
NP
UTM
1-DR
GBB
NG
S-V
ID
EOS
TA
NDBY/
ONT
EM
PVID
EOCO
MP
ON
E
N
TLA
MPKE
Y
STO
NES
EAR
CHRE
S
ETM
EN
UFOCUSLEN
S S
HI
FTZ
OO
M
  VIDEO R-AU
DIO I
N-LS-
VIDEO
BNC R
GB AU
DIO I
N1
AU
DIO I
N
2
RGB O
UTAU
DIO O
U
T REMOT
E 
CON
TR
OL
R/CR/PRG/YB/
CB/PBH
VY C
ONT
ROL NETWOR
K
CR/PRC
a/Pa
I
N
T
E
RI
NP
UTM
1
-DR
GBB
NG
S-V
ID
EOSTA
NDBY/
ONT
EM
PVI
D
EOCO
MP
ON
E
N
TLA
MPKE
YSTO
NES
E
AR
CHRE
SETM
EN
UFO
CUSLEN
S
 S
HI
F
TZ
OOM
  VIDEO R-AU
DIO I
N-LS-VIDEO
BNC RGB AU
DIO I
N1
AU
DIO I
N2
RGB O
UTAU
DIO O
U
T REMOTE 
CON
TR
OL
R
/CR/PRG/YB/
CB/PBH
VY CO
NTROL N
ETWOR
K
CR/PRCa/Pa
STANDBY/ONVIDEOLASER INDICATORRGB
BLANKASPECTLASERLENS SHIFT+
–––++FOCUS ZOOM
IN
T
E
RI
NP
UTM1
-DR
GBBNG
S-V
ID
EOS
TA
NDBY/
ONT
EM
PVID
EOCO
MP
O
N
E
N
TLA
MPKEY
STONESE
AR
CHRES
ETM
EN
UFO
CUSLEN
S S
HIF
TZOO
M
  VIDEO R-AU
DIO I
N-LS-
VIDEO
BNC RGB AU
DIO I
N1
AU
DIO I
N
2
RG
B O
UTAU
DIO O
U
T RE
MO
TE 
CON
TR
O
L
R
/CR/PRG
/YB/
CB/PBH
VY CO
NTR
OL N
ETW
O
RK
CR/P
RC
a/Pa
15
Turning On The Power
WARNING• When the power is ON, a strong light is emitted. Do not look
into the lens or vents of the projector.
• Turn the power on/off in right order. Please power on the projector before
the connected devices. Power off the projector after the connected devices.NOTE
Power ON/OFF Power ON/OFF
Remove the lens cap.
2Set the power switch to [ | ] (ON).
The STANDBY/ON indicator will light to solid orange.
STANDBY/ONSTANDBY/ON button / indicator
LENS SHIFT
buttons Power switch (ON position)
STANDBY/ON
buttonSTANDBY/ON
3Press the STANDBY/ON button.
The projector lamp will light up and the
STANDBY/ON indicator will begin blinking green.
When the power is completely on, the indicator
will stop blinking and light green.
4Use the LENS SHIFT buttons to shift the
picture upward or downward.
5Select an input signal according to the
section “Selecting An Input Signal” of the
following page.
LENS SHIFT
Power switch (OFF position)
1Press the STANDBY/ON button.  
The message “Power off?” will appear on
the screen for approximately 5 seconds.
Attached the lens cap.
2Press the STANDBY/ON button again while
“Power off?” the message is visible. 
The projector lamp will go off, and the
STANDBY/ON indicator will begin blanking orange.
Then the STANDBY/ON indicator will stop blinking
and light to solid orange when the lamp cooling is
complete.
3Switch the power switch to [O] (OFF). 
The STANDBY/ON indicator will go off.
STANDBY/ON
buttonSTANDBY/ON
STANDBY/ONSTANDBY/ON button / indicator
Turning Off The Power
STANDBY/ONVIDEOLASER INDICATORRGB
BLANKASPECTLASERLENS SHIFT+
–––++FOCUS ZOOM
1
4
$19&/(0(~
						

							I
N
T
E
RI
N
P
UTM1-DR
GBB
NG
S-V
ID
EOS
TA
NDBY/
ONT
EM
PVID
EOCO
MP
ON
E
N
TLA
MPKE
Y
S
TO
NES
EAR
CHRE
S
ETM
EN
UFO
CUSLEN
S S
HI
F
TZ
OO
M
  VIDEO R-AU
DIO I
N-LS-
VIDEO
BNC RGB AU
DIO I
N1
AU
DIO I
N
2
RGB O
UTAU
DIO O
UT REMOTE 
CONTR
OL
R
/CR/PRG/YB/
CB/PBH
VY C
ONTROL N
ETW
ORK
CR/PRCa/P
a
STANDBY/ONVIDEOLASER INDICATOR
ESC MENUPOSITIONRESET AUTO
KEYSTONE1  2  3
ID CHANGESEARCH
ON
OFFFREEZE MUTEMAGNFYPinPVOLUME
RGB
BLANK
PREVIOUSNEXT ASPECT ENTER
LASERLENS SHIFT+
–––++FOCUS ZOOM
16
Operating Operating
Selecting An Input Signal
Select an input signal.
Turn the INPUT dial of the projector.
Turning the dial cycles through the input ports as
shown below. Select the signal you wish to project.
M1-D RGB BNC
S-VIDEO COMPONEN
T VIDEO
M1-D RGB BNC
S-VIDEO COMPONEN
T VIDEO
I
N
T
E
RI
NP
UTM1-DR
G
BB
NG
S-V
IDEOS
TA
NDBY/
ONT
EM
PVIDEOCO
MP
ON
E
N
TLA
MPKE
YS
TO
NES
EAR
CHRE
SETMEN
UFOCUSLEN
S S
HIFTZOOM
  
VIDEO R-AU
DIO I
N-LS-
VIDEO
BNC R
GB AU
DIO I
N1
AU
DIO I
N
2
RGB O
UTAU
DIO O
U
T RE
MOT
E 
CO
N
TR
O
L
R/
CR/PRG/YB/
CB/PBH
VY C
O
NTR
OL N
ETW
OR
K
CR/PRC
a/P
a
ENTER
INPUTM1-DRGB
BNC
S-VIDEO
VIDEO
COMPONENT
SEARCH
RESET
MENU
■Using the INPUT dial 
Press the SEARCH button of the projector or the
remote control. 
Pressing the button automatically cycles through input
ports and displays the picture of retrieved signal. 
memoIf no signal is found or the projector is unstable to
find an input signal at any of its ports, it will turn to the state
it was in prior to the search.
■Using SEARCH button 
Press the RGB button of the remote control.
Pressing the button toggles between the RGB ports
as shown below Select the signal you wish to project.
Press the VIDEO button of the remote control.
Pressing the button toggles between the VIDEO ports
as shown below Select the signal you wish to project.
M1-D RGB BNC
S-VIDEO VIDEO COMPONENT
INPUT dialSEARCH button
VIDEO button
RGB button
SEARCH button
ZOOM
buttonsFOCUS
buttons
ZOOMFOCUS
Use the FOCUS buttons to adjust the focus.Use the ZOOM buttons to adjust the screen size.
■Using RGB button
■Using VIDEO button 
2
3
1
$19&/(0(~
						

							STANDBY/ONVIDEOLASER INDICATOR
ESC MENUPOSITIONRESET AUTO
KEYSTONE1  2  3
ID CHANGESEARCH
ON
OFFFREEZE MUTEMAGNFYPinPVOLUME
RGB
BLANK
PREVIOUSNEXT ASPECT ENTER
LASERLENS SHIFT+
–––++FOCUS ZOOM
STANDBY/ONVIDEOLASER INDICATOR
ESC MENUPOSITIONRESET AUTO
KEYSTONE1  2  3
ID CHANGESEARCH
ON
OFFFREEZE MUTEMAGNFYPinPVOLUME
RGB
BLANK
PREVIOUSNEXT ASPECT ENTER
LASERLENS SHIFT+
–––++FOCUS ZOOM
17
Operating (continued) Operating (continued)
The Vertical position (V POSITION), the horizontal
position (H POSITION), the clock phase (H PHASE)
and horizontal size (H SIZE) will be automatically
adjusted.
memoMake sure that the application window is set to
its maximum size prior to attempting to use this feature.
Dark pictures may still be incorrectly adjusted. Use a
bright screen when adjusting.
The signal type mode best suited for the respective
input signal will be selected automatically.
memoThis function is available only when the AUTO is
selected to the item VIDEO of the INPUT menu. For a
component video signal, the signal type is identified
automatically independently of this function.
Selecting The Aspect Ratio
Press the Aspect button to toggle between the
modes for aspect ratio.
ASPECT button
AUTO button
4:316:9
NORMAL
Using The Automatic Adjustment Feature
Press the AUTO button.
memoNORMAL keeps the original aspect ratio of the
input signal.
memoAt a HDTV signal of 1125i or 750p, only 16:9 can
be selected.
memoThe automatic adjustment operation requires approximately 10 seconds. Also,
please note that it may not function correctly with some input.
4:316:9
4:316:9
SMALL
■At a M1-D signal 
■At a RGB signal (not M1-D)
■At a video signal 
■At a RGB signal 
■At a video signal 
1
1
$19&/(0(~
						

							STANDBY/ONVIDEOLASER INDICATOR
ESC MENUPOSITIONRESET AUTO
KEYSTONE1  2  3
ID CHANGESEARCH
ON
OFFFREEZE MUTEMAGNFYPinPVOLUME
RGB
BLANK
PREVIOUSNEXT ASPECT ENTER
LASERLENS SHIFT+
–––++FOCUS ZOOM
STANDBY/ONVIDEOLASER INDICATOR
ESC MENUPOSITIONRESET AUTO
KEYSTONE1  2  3
ID CHANGESEARCH
ON
OFFFREEZE MUTEMAGNFYPinPVOLUME
RGB
BLANK
PREVIOUSNEXT ASPECT ENTER
LASERLENS SHIFT+
–––++FOCUS ZOOM
18
Operating (continued) Operating (continued)
Adjusting The Picture Position
Press the POSITION button.
As illustrated on the right, a
dialog will appear on the
screen to aid you in adjusting
the position.
POSITION
POSITION
buttonCursor
buttons 
RESET
button
KEYSTONE
button
2
1
Use the cursor buttons  / / / to adjust the
position.
memoWhen you want to initialize the position, press
the RESET button during adjustment.
3
1
Press the POSITION button again to close the
dialog and complete this operation.
memoEven if you dont do anything, the dialog will
automatically disappear after a few seconds.
2
Use the cursor buttons  / to
select the direction of distortion to
correct ( or ).
4Press the KEYSTONE button again to close the
dialog and complete this operation. 
memoEven if you dont do anything, the dialog will
automatically disappear after a few seconds.
memoWhen this adjustment is excessive, certain
degradation may appear on the picture. Also,
please note that it may not function correctly with
some input.
3Use the cursor buttons  / to correct the
distortion.
Correcting The Keystone Distortion
Press the KEYSTONE button.
As illustrated on the right, a dialog
will appear on the screen to aid you
in correcting the keystone
distortion. 
0
KEYSTONE
+
0+
memoThis function is available only for RGB signals.
Cursor
buttons 
$19&/(0(~