Dukane Imagepro 8940 Portable Lcd Projector Users Manual
Here you can view all the pages of manual Dukane Imagepro 8940 Portable Lcd Projector Users Manual. The Dukane manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
39 Related Messages (continued) T T roubleshooting (continued) roubleshooting (continued) MessageDescription CLEAN THE AIR FILTER POWER OFF FIRST, THEN CLEAN THE AIR FILTER. AFTER CLEANING THE AIR FILTER, RESET THE FILTER TIMER. The time the filter timer has counted has reached 100 hours. Please clear or change the air filter by referring to the section “Air Filter”. After caring for the air filter, please be sure to reset the filter timer. CHECK THE AIR FLOW The internal portion temperature is...
Page 42
40 T T roubleshooting (continued) roubleshooting (continued) Regarding The Indicator Lamps Lighting and flashing of the STANDBY/ON indicator, the LAMP indicator, and the TEMP indicator have the meanings as described in the table below. Please respond in accordance with the instructions within the table. If the same indication is displayed after the treatment, or if an indication other than the following is displayed, please contact your dealer or service company. • When the interior portion has become...
Page 43
41 T T roubleshooting (continued) roubleshooting (continued) Regarding The Indicator Lamps (continued) STANDBY/ON indicatorLAMP indicatorTEMP indicatorDescription Lighting in RedBlinking in RedTurned off Either there is no lamp and/or lamp cover, or either of these has not been properly fixed. Please turn the power off, and allow the unit to cool down at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and...
Page 44
42 T T roubleshooting (continued) roubleshooting (continued) Phenomena That May Easily Be Mistaken For Machine Defects WARNING• Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur. In such cases, immediately turn off the power switch and then disconnect the power plug from the power outlet After making sure that the smoke or odor has stopped, contact your dealer or...
Page 45
43 T T roubleshooting (continued) roubleshooting (continued) Phenomena That May Easily Be Mistaken For Machine Defects (continued) PhenomenonCases not involving a machine defectReference pages Pictures are displayed, but no sounds are heard. The signal cables are not correctly connected. Correctly connect the connection cables.8~11 The volume is adjusted to an extremely low level. Adjust the VOLUME to a higher level.18, 32 The sound is muted. Press the MUTE button to restore the sound.18 The audio...
Page 46
44 If a problem occurs with the equipment, first refer to the “Troubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied. W W arranty And After-Service arranty And After-Service Specifications Specifications • This specifications are subject to change without notice.NOTE ItemSpecification Product nameLiquid crystal projector Liquid crystal panelPanel size2.5 cm (0.99...
Page 47
![Page 47
45
Projector
8940
8940
Users Manual - Operating Guide
Users Manual - Operating Guide
TECHNICAL
Dimensions
Dimensions
[unit: mm]](http://img.usermanuals.tech/thumb/5762/88742/w300_dukane-imagepro-8940-manual_d-46.png "Page 47
45
Projector
8940
8940
Users Manual - Operating Guide
Users Manual - Operating Guide
TECHNICAL
Dimensions
Dimensions
[unit: mm]")
45 Projector 8940 8940 Users Manual - Operating Guide Users Manual - Operating Guide TECHNICAL Dimensions Dimensions [unit: mm]
Page 48
![Page 48
46•
Be sure to check jack type, signal level, timing and resolution before
connecting this projector to a computer.
•Some computers may hove multiple display screen modes. Use of some of th\
ese
modes will not be possible with this projector.
•Depending on the input signal, full-size display may not be possible in \
some cases.
Refer to the number of display pixels above.
•Although the projector can display signals with resolution up to UXGA (\
1600 x 1200),
the signal will be converted to the...](http://img.usermanuals.tech/thumb/5762/88742/w300_dukane-imagepro-8940-manual_d-47.png "Page 48
46•
Be sure to check jack type, signal level, timing and resolution before
connecting this projector to a computer.
•Some computers may hove multiple display screen modes. Use of some of th\
ese
modes will not be possible with this projector.
•Depending on the input signal, full-size display may not be possible in \
some cases.
Refer to the number of display pixels above.
•Although the projector can display signals with resolution up to UXGA (\
1600 x 1200),
the signal will be converted to the...")
46• Be sure to check jack type, signal level, timing and resolution before connecting this projector to a computer. •Some computers may hove multiple display screen modes. Use of some of th\ ese modes will not be possible with this projector. •Depending on the input signal, full-size display may not be possible in \ some cases. Refer to the number of display pixels above. •Although the projector can display signals with resolution up to UXGA (\ 1600 x 1200), the signal will be converted to the...
Page 49
![Page 49
47
Initial Set Signals
Initial Set Signals
The following signals are used for the initial settings. The signal timi\
ng of some computer
models may be different. In such case, adjust the items V POSITION and H\
POSITION in
the PICTURE-2 menu.
DATA
H. Sync.V. Sync.
DATADisplay interval c
Back porch b
Sync. a Front porch d
Display interval c
Back porch b
Sync. a Front porch d
Computer /
SignalHorizontal signal timing (µs)
abcd
TEXT2.03.020.31.0
VGA (60Hz)3.81.925.40.6
Mac 13mode2.13.221.22.1
VGA...](http://img.usermanuals.tech/thumb/5762/88742/w300_dukane-imagepro-8940-manual_d-48.png "Page 49
47
Initial Set Signals
Initial Set Signals
The following signals are used for the initial settings. The signal timi\
ng of some computer
models may be different. In such case, adjust the items V POSITION and H\
POSITION in
the PICTURE-2 menu.
DATA
H. Sync.V. Sync.
DATADisplay interval c
Back porch b
Sync. a Front porch d
Display interval c
Back porch b
Sync. a Front porch d
Computer /
SignalHorizontal signal timing (µs)
abcd
TEXT2.03.020.31.0
VGA (60Hz)3.81.925.40.6
Mac 13mode2.13.221.22.1
VGA...")
47 Initial Set Signals Initial Set Signals The following signals are used for the initial settings. The signal timi\ ng of some computer models may be different. In such case, adjust the items V POSITION and H\ POSITION in the PICTURE-2 menu. DATA H. Sync.V. Sync. DATADisplay interval c Back porch b Sync. a Front porch d Display interval c Back porch b Sync. a Front porch d Computer / SignalHorizontal signal timing (µs) abcd TEXT2.03.020.31.0 VGA (60Hz)3.81.925.40.6 Mac 13mode2.13.221.22.1 VGA...
Page 50
48 • Video signal: RGB separate, Analog, 0.7 Vp-p, 75 Ω terminator (positive) • H./V. sync. Signal: TTL level (positive/negative) • Composite sync. Signal: TTL level D-Sub 15 pin shrink jack Connection T Connection T o The Ports o The Ports PinSignalPinSignalPinSignal1Video input Red6Ground Red--2Video input Green7Ground Green=SDA (DDC)3Video input Blue8Ground BlueqH./Composite sync.4-9-wV. sync.5Ground0GroundeSCL (DDC) A RGB 54321 67890 ewq=- • Video signal: RGB separate, Analog, 0.7 Vp-p, 75 Ω...