Dukane Imagepro 8918 Projector Users Manual
Here you can view all the pages of manual Dukane Imagepro 8918 Projector Users Manual. The Dukane manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 121
![Page 121
32
e-SHOT (Still Image Transfer) Display
e-SHOT (Still Image Transfer) Display
The projector can display a still image that is transferred via the netw\
ork.
Communication Port
The following port is used for e-SHOT.
TCP #9716
(9)
e-SHOT (Still Image Transfer) Settings
Configure the following items from a web browser when e-SHOT is used.
Example: If the IP address of the projector is set to 192.168.1.10:
• e-SHOT is not available via communication ports which are used for
the command control (TCP...](http://img.usermanuals.tech/thumb/5762/88647/w300_dukane-imagepro-8918-manual_d-120.png "Page 121
32
e-SHOT (Still Image Transfer) Display
e-SHOT (Still Image Transfer) Display
The projector can display a still image that is transferred via the netw\
ork.
Communication Port
The following port is used for e-SHOT.
TCP #9716
(9)
e-SHOT (Still Image Transfer) Settings
Configure the following items from a web browser when e-SHOT is used.
Example: If the IP address of the projector is set to 192.168.1.10:
• e-SHOT is not available via communication ports which are used for
the command control (TCP...")
32
e-SHOT (Still Image Transfer) Display
e-SHOT (Still Image Transfer) Display
The projector can display a still image that is transferred via the netw\
ork.
Communication Port
The following port is used for e-SHOT.
TCP #9716
(9)
e-SHOT (Still Image Transfer) Settings
Configure the following items from a web browser when e-SHOT is used.
Example: If the IP address of the projector is set to 192.168.1.10:
• e-SHOT is not available via communication ports which are used for
the command control (TCP...
Page 122
![Page 122
33
e-SHOT(Still Image Transfer) Display
e-SHOT (Still Image Transfer) Settings (Continued)
When the authentication setting is enabled, the following settings are r\
equired.
6) Click [Security Settings] on the main menu.
) Select [Network Control] and enter the desired authentication password. *
see Note
) Click the [Apply] button to save the settings. * see Note
• The Authentication Password will be the same for [Network Control
Port1 (Port: 23)], [Network Control...](http://img.usermanuals.tech/thumb/5762/88647/w300_dukane-imagepro-8918-manual_d-121.png "Page 122
33
e-SHOT(Still Image Transfer) Display
e-SHOT (Still Image Transfer) Settings (Continued)
When the authentication setting is enabled, the following settings are r\
equired.
6) Click [Security Settings] on the main menu.
) Select [Network Control] and enter the desired authentication password. *
see Note
) Click the [Apply] button to save the settings. * see Note
• The Authentication Password will be the same for [Network Control
Port1 (Port: 23)], [Network Control...")
33 e-SHOT(Still Image Transfer) Display e-SHOT (Still Image Transfer) Settings (Continued) When the authentication setting is enabled, the following settings are r\ equired. 6) Click [Security Settings] on the main menu. ) Select [Network Control] and enter the desired authentication password. * see Note ) Click the [Apply] button to save the settings. * see Note • The Authentication Password will be the same for [Network Control Port1 (Port: 23)], [Network Control...
Page 123
34
Command Control via the Network
Command Control via the Network
You can configure and control the projector via the network using RS-232C
commands.
Communication Port
The following two ports are assigned for the command control.
TCP #23
TCP #9715
Command Control Settings
Configure the following items from a web browser when command control is used.
Example: If the IP address of the projector is set to 192.168.1.10:
• Command control is not available via communication port (TCP
#9716)...
Page 124
![Page 124
35
Command Control via the Network
Command Control Settings (Continued)
When the authentication setting is enabled, the following settings are r\
equired.
(20)
) Click [Security Settings] on the main menu.
) Click [Network Control] and enter the desired authentication password. * See
Note .
9) Click the [Apply] button to save the settings. * See Note .
• The Authentication Password will be the same for [Network Control
Port1 (Port: 23)], [Network Control Port2 (Port:...](http://img.usermanuals.tech/thumb/5762/88647/w300_dukane-imagepro-8918-manual_d-123.png "Page 124
35
Command Control via the Network
Command Control Settings (Continued)
When the authentication setting is enabled, the following settings are r\
equired.
(20)
) Click [Security Settings] on the main menu.
) Click [Network Control] and enter the desired authentication password. * See
Note .
9) Click the [Apply] button to save the settings. * See Note .
• The Authentication Password will be the same for [Network Control
Port1 (Port: 23)], [Network Control Port2 (Port:...")
35 Command Control via the Network Command Control Settings (Continued) When the authentication setting is enabled, the following settings are r\ equired. (20) ) Click [Security Settings] on the main menu. ) Click [Network Control] and enter the desired authentication password. * See Note . 9) Click the [Apply] button to save the settings. * See Note . • The Authentication Password will be the same for [Network Control Port1 (Port: 23)], [Network Control Port2 (Port:...
Page 125
![Page 125
36
Command Control via the Network
Command format
Command formats differ among the different communication ports.
TCP #23
You can use the RS-232C commands without any changes. The reply data format
is the same as the RS-232C commands. However, the following reply will be sent
back in the event of authentication failure when authentication is enabl\
ed.
ReplyError code
0x1F0x040x00
TCP #9715
Send Data format
The following formatting is added to the header (0x02), Data length (0x0D),...](http://img.usermanuals.tech/thumb/5762/88647/w300_dukane-imagepro-8918-manual_d-124.png "Page 125
36
Command Control via the Network
Command format
Command formats differ among the different communication ports.
TCP #23
You can use the RS-232C commands without any changes. The reply data format
is the same as the RS-232C commands. However, the following reply will be sent
back in the event of authentication failure when authentication is enabl\
ed.
ReplyError code
0x1F0x040x00
TCP #9715
Send Data format
The following formatting is added to the header (0x02), Data length (0x0D),...")
36
Command Control via the Network
Command format
Command formats differ among the different communication ports.
TCP #23
You can use the RS-232C commands without any changes. The reply data format
is the same as the RS-232C commands. However, the following reply will be sent
back in the event of authentication failure when authentication is enabl\
ed.
ReplyError code
0x1F0x040x00
TCP #9715
Send Data format
The following formatting is added to the header (0x02), Data length (0x0D),...
Page 126
![Page 126
37
Command Control via the Network
Reply Data format
The connection ID (the data is same as the connection ID data on the se\
nding
data format) is attached to the RS-232C commands reply data.
ReplyConnection ID
0x06 byte
ReplyConnection ID
0x15 byte
ReplyError codeConnection ID
0x1C bytes byte
ReplyDataConnection ID
0x1D bytes byte
ReplyStatus codeConnection ID
0x1F bytes byte
ReplyAuthentication Error codeConnection ID
0x1F0x040x00 byte](http://img.usermanuals.tech/thumb/5762/88647/w300_dukane-imagepro-8918-manual_d-125.png "Page 126
37
Command Control via the Network
Reply Data format
The connection ID (the data is same as the connection ID data on the se\
nding
data format) is attached to the RS-232C commands reply data.
ReplyConnection ID
0x06 byte
ReplyConnection ID
0x15 byte
ReplyError codeConnection ID
0x1C bytes byte
ReplyDataConnection ID
0x1D bytes byte
ReplyStatus codeConnection ID
0x1F bytes byte
ReplyAuthentication Error codeConnection ID
0x1F0x040x00 byte")
37 Command Control via the Network Reply Data format The connection ID (the data is same as the connection ID data on the se\ nding data format) is attached to the RS-232C commands reply data. ReplyConnection ID 0x06 byte ReplyConnection ID 0x15 byte ReplyError codeConnection ID 0x1C bytes byte ReplyDataConnection ID 0x1D bytes byte ReplyStatus codeConnection ID 0x1F bytes byte ReplyAuthentication Error codeConnection ID 0x1F0x040x00 byte
Page 127
![Page 127
38
Command Control via the Network
Automatic Connection Break
The TCP connection will be automatically disconnected after there is no
communication for 30 seconds after being established.
Authentication
The projector does not accept commands without authentication success
when authentication is enabled. The projector uses a challenge response type
authentication with an MD5 (Message Digest 5) algorithm.
When the projector is using a LAN, a random eight bytes will be returned\
if
authentication is...](http://img.usermanuals.tech/thumb/5762/88647/w300_dukane-imagepro-8918-manual_d-126.png "Page 127
38
Command Control via the Network
Automatic Connection Break
The TCP connection will be automatically disconnected after there is no
communication for 30 seconds after being established.
Authentication
The projector does not accept commands without authentication success
when authentication is enabled. The projector uses a challenge response type
authentication with an MD5 (Message Digest 5) algorithm.
When the projector is using a LAN, a random eight bytes will be returned\
if
authentication is...")
38 Command Control via the Network Automatic Connection Break The TCP connection will be automatically disconnected after there is no communication for 30 seconds after being established. Authentication The projector does not accept commands without authentication success when authentication is enabled. The projector uses a challenge response type authentication with an MD5 (Message Digest 5) algorithm. When the projector is using a LAN, a random eight bytes will be returned\ if authentication is...
Page 128
About The Symbols Varioussymbols areused inthis manual, theuser’s manual andonthe product itself toensure correctusage,toprevent dangertothe user andothers, andto prevent property damage. Themeanings ofthesesymbols aredescribed below. Itis important thatyouread these descriptions thoroughlyand...
Page 129
Safety Precautions WARNING Never use the projector if a problem should occur. Abnormaloperations suchassmoke, strange odor,noimage, nosound,excessive sound,damaged casingorelements orcables, penetration ofliquidsorforeignmatter,etc.cancauseafireorelectricalshock.Insuch case, immediately turnoffthe power switch andthen...
Page 130
WARNING Be cautious of High temperatures of the projector. Hightemperatures aregenerated whenthelamp islit. Itcould result infire orburn.Usespecialcautioninhouseholdswherechildrenarepresent.Donot touch about thelens, airfans andventilation openingsduringuseorimmediatelyafteruse,topreventaburn....