Dukane Imagepro 8911 Portable Lcd Projector Users Manual

9

Setting up
About the fi lter cover for bottom-up use
WARNING  ►Do not replace the fi lter cover during use or immediately 
after use. While the projector connects with a power supply, or the projector is 
in a high temperature state, handling could cause an electric shock, a fi re, a 
burn and/or malfunction to the projector.Before handling, make sure the power 
switch is off and the power cord is not plugged in, then wait at least 45 minutes.
When the projector is installed bottom up, please use the...

10
Setting up
Connecting your devices
CAUTION  ►Turn off all devicesy
prior to cony
Qecting them t\
o the projecty
Rr. 
Attempting toy
connect a liy
Ye device to y
Whe projector \
may generate \
extremely 
loud noises or other abnormalities that may result in malfunction and/or damage 
to the devicey
and/or projey
Ftor.
►Use the accey
Vsory cable oy
U a designated\
-type cable y
Ior the connec\
tion. 
Some cables hy
Dve to be usey
G with core sy
Ht. A too long cay
Ele may causey
a 
certain pictuy
Ue...

11

Y
VIDEO
RGB IN1RGB IN2
DVI-D
RGB OUT CONTROLAUDIO-IN
REMOTE
 
CONTROL
US
B
DC OUT
S-VIDEO
LAN
COMPONENT VIDE
O
CB/PBCR/PR
R-AUDIO IN-L AUDIO-OU
T
Y
VIDEO
RGB IN1
RGB IN2
DVI-D
RGB OUT CONTROLAUDIO-IN
REMOTE
 
CONTROL
US
B
DC OUT
S-VIDEO
LAN
COMPONENT VIDE
O
CB/PBCR/PR
R-AUDIO IN-L AUDIO-OU
T
Y
VIDEO
RGB IN1
RGB IN2
DVI-D
RGB OUT CONTROL
AUDIO-IN
REMOTE
 
CONTROL
USBDC OUT
S-VIDE
O
LAN
COMPONENT VIDEO
CB/PBCR/PR
R-AUDIO IN-L AUDIO-OU
T
Y
VIDEO
RGB IN
1 RGB IN2
DVI-D
RGB OU T CONTROLAUDIO-IN
REMOTE...

12

Y
VIDEO
RGB IN1RGB IN2
DVI-D
RGB OUT CONTROL
AUDIO-IN
REMOTE
 
CONTROL
US
B
DC OUT
S-VIDE
O
LAN
COMPONENT VIDE
O
CB/PBCR/PR
R-AUDIO IN-L AUDIO-OU
T
Y
VIDEO
RGB IN1
RGB IN2
DVI-D
RGB OUT CONTROL
AUDIO-IN
REMOTE
 
CONTROL
US
B
DC OUT
S-VIDE
O
LAN
COMPONENT VIDE
O
CB/PBCR/PR
R-AUDIO IN-L AUDIO-OU
T
Y
VIDEO
RGB IN1
RGB IN2
DVI-D
RGB OUT CONTRO
L
AUDIO-IN
REMOTE
 
CONTROL
US
B
DC OUT
S-VIDE
O
LAN
COMPONENT VIDE
O
CB/PBCR/PR
R-AUDIO IN-L AUDIO-OU
T
Y
VIDEO
RGB IN1
RGB IN2
DVI-D
RGB OUT CONTRO
L
AUDIO-IN...

13

Setting up
Connecting power supply
WARNING  ►Please use extra caution when connecting the power cord as 
incorrect or faulty connections may result in fi re and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, contact 
your dealer to newly get correct one.
• Only plug the power cord into an outlet rated for use with the power cord's 
specifi ed voltage range.
• Never modify the power cord. Never attempt to defeat the ground connection 
of the...

14

Putting batteries

WARNING
  
►
Always handle the batteries with care and use them only as 

directed. Improper use may result in battery explosion, cracking or leakage, 

which could result in fi re, injury and/or pollution of the surrounding environment.

• Be sure to use only the batteries specifi ed. Do not use batteries of different 

types at the same time. Do not mix a new battery with used one. 

• 
Make sure the plus and minus terminals are correctly aligned when loading a battery.

• Keep a...

15

Remote control
Using the remote control
CAUTION  ►Be careful in handling the remote control.
• Do not drop or otherwise expose the remote control to physical impact.
• Do not get the remote control wet or place it on wet objects. Doing so may 
result in malfunction.
• Remove the batteries from the remote control and store them in a safe place if 
you won’t be using the remote control for an extended period. 
• Replace the batteries whenever the remote control starts to malfunction. 
• When strong...

16

STANDBY/ONVIDEOUPDOWNBLANK
ASPECTPUSH
LASERINDICATOR
LASER
RGB
ENTER
ONOFF
ESCPOSITIONMAGNIFYMUTEKEYSTONEFREEZEONE TOUCH
AUTO PA
GE
MENURESETVOLUME

ST
ANDBY/ON
INPU
T KEYS TONE
RESE
TMENU
POWER T E M P L A M P

Power on/off
Power on/off
WARNING  ►When the power is on, a strong light is emitted. Do not look 
into the lens or vents of the projector.
NOTE  • Turn the power on/off in right order. Please power on the projector 
before the connected devices. Power off the projector after the connected...

17

Operating
Operating
Adjusting the volume
1. Press the VOLUME button on the remote control.
A dialog will appear on the screen to aid you in adjusting 
the volume.
2. Use the cursor buttons ▲/▼ to adjust the volume.
To close the dialog and complete the operation, press the VOLUME button 
again. Even if you don’t do anything, the dialog will automatically disappear 
after a few seconds. 
Temporarily muting the sound
1. Press the MUTE button on the remote control. 
A dialog will appear on the screen...

18

Operating
Adjusting the zoom and focus
1. Use the zoom knob to adjust the screen size. 
2. Use the focus ring to focus the picture.
Adjusting screen with ONE-TOUCH
1. Press the ONE TOUCH button on the remote control. This 
activates the following functions at one time.
Signal search: Projector will cycle through its input ports in 
order to fi nd any input signal. The search is started from the 
current port. Then when an input is found, the projector will 
stop searching and display the image. If...