Dukane Imagepro 8761 Portable Projector Users Manual

							E-51
CONVENIENT FEATURES
Using the Remote Mouse Function
The built-in remote mouse function enables you to operate your computers
mouse functions from the remote control (Computer mode). It is a great
convenience for clicking through your computer-generated presentations.
To return to the projector operation mode (Projector mode), press the PJ
button (lit red).
Connecting to your computer for the remote mouse
fuction
If you wish to use the remote mouse function, use the supplied USB cable
to connect the USB port (type B) of the projector and the USB port (type
A) of your computer.
NOTE: Depending on the type of connection or OS installed on your computer,
you may have to restart your computer or change you computer settings.
When using the USB Port
For PC, the mouse receiver function can only be used with a Windows 98,
Windows ME, Windows XP or Windows 2000 operating system.
NOTE: Wait at least 5 seconds after disconnecting the USB cable before recon-
necting it and vice versa. The computer may not identify the built-in mouse re-
ceiver if it is repeatedly connected and disconnected in rapid intervals.
Type B
Type A 
						

							E-52
CONVENIENT FEATURES 
 Using the Remote Mouse Function
Switching operation mode between computer and pro-
jector
The three shaded buttons shown on the drawing work as a computer mouse
in the Computer mode.
In the Computer mode the PJ button is not lit.
MENU
ENTERCANCEL
PJ
FOCUS ZOOM OFF
VIDEO
AUTO ADJ.
S-VIDEO RGB1 RGB2
LASERON
VOLUME
SHIFT
HELP
POINTER
KEYSTONEMAGNIFY
FREEZE
PIC-MUTEPC CARDSLIDE
FOLDER
SLIDE
LIST
SELECT
POWER
Not lit
Works as a mouse
for your computer.
Works as a right-
click button for
your computer.
Works as a left-click button
for your computer.
MENU
ENTERCANCEL
FOCUS ZOOM OFF
VIDEO
AUTO ADJ.
S-VIDEO RGB1 RGB2
LASERON
VOLUME
SHIFT
HELP
POINTER
KEYSTONEMAGNIFY
FREEZE
PIC-MUTEPC CARDSLIDE
FOLDER
SLIDE
LIST
SELECT
POWER
PJ
Works as the Select button
on the projector.
Lit red
Works as the Enter button
on the projector.Works as the Cancel
button on the
projector. 
						

							E-53 •When the MENU button is pressed, the PJ button lights red to indi-
cate that you are in the Projector mode, which allows the projector
menu operation using the three buttons.
•When the POINTER button is pressed, the PJ button lights red to
indicate that you are in the Projector mode and that the SELECT

 button works as a moving button for the POINTER or magni-
fied image.
•If no buttons are pressed within 60 seconds, the PJ buttons light
goes out to indicate that you are in the Computer mode. To enable
the projector menu operation again, press the PJ button to light red.
To move the pointer or a magnified image again, turn off the pointer
and then turn on the pointer (press the POINTER button two times).
•When the PJ button is lit, if you want to use the mouse function im-
mediately, press the PJ button to return to the Computer mode (not
lit).
During Computer mode:
In Computer mode, by pressing the ENTER button for 2 seconds or more
then releasing, the drag mode is set and the drag operation can be per-
formed simply by pressing the SELECT 
 (mouse) button. To set the
drag-and-drop, press the ENTER (left click) button again. To cancel the
drag mode, press the CANCEL (right click) button.
CONVENIENT FEATURES 
 Using the Remote Mouse Function 
						

							E-54
CONVENIENT FEATURES
Turning Off the Image and Sound
Press the Picture Mute button to turn off the image
and sound for a short period of time. Press again to
restore the image and sound.PIC-MUTE
Freezing a Picture
Press the Freeze button to freeze a picture. Press
again to resume motion.FREEZE
Using the Projector Pointer
You can use one of nine pointers to draw your
audiences attention to the portion of a projected
image you want.
Press the Pointer button to dis-
play the projector pointer.
POINTER
Press the Pointer button to display the projector pointer.
Use the Select button to
move the projector pointer.
SELECT
Use the Select button to move the projector pointer. 
						

							E-55
Enlarging and Moving a Picture
CONVENIENT FEATURES
You can enlarge the area you want up to 400 percent.
To  do so:
1. Press the Pointer button to display the projector pointer.
2. Move the projector pointer to the area you want to enlarge.
3. Enlarge the selected area.
When the Magnify (+) button is pressed, the pointer is changed to a mag-
nifying glass. To move the magnifying glass, use the SELECT button.
4. Return the image to the original size.
POINTER
SELECT
MAGNIFY
MAGNIFY 
						

							E-56
CONVENIENT FEATURES
Getting the On-line Help
You get the contents about Help.
Display Help
Exit Help
HELP
SELECT
The projector is compatible with either a USB memory device or USB
memory card reader which supports the viewer and security features.
•To use a USB memory device or USB memory card reader, connect
the device to the USB port (type A).
•Select one of the Drive icons in the Viewer toolbar, Capture toolbar and
PC Card File setting screen. Up to four drives can be accepted.
•To use a USB memory device as a Protect key for Security function,
select one from the Drive icons in the Security setting screen.
USB Memory Device or USB Memory Card Reader Support 
						

							E-57 NOTE:
•Some USB memory devices (brands) or USB memory card readers may not
work.
•You cannot use a USB memory device and a USB memory card reader when
connecting a USB mouse to the projector.
Using a USB HUB that allows multiple USB memory devices or card readers
is not supported either.
•Do not do the following while the USB memory device or USB memory card
reader’s access indicator is lit or flashing (while data is being accessed.)
Doing so can damage your USB memory device or USB memory card in the
reader. Back up your data in case it will need to be restored.
*Pulling out the USB memory device or USB memory card reader from the
USB port of the projector.
*Pulling out the memory card from the USB memory card reader
*Turning off the main power switch or unplugging the power cable.
•The drive for ”USB 1-4” is displayed only when the USB memory device or
USB memory card reader is connected to the projector. The drive for “USB 1-
4” may be displayed differently from the one in the USB memory card reader.
•Some USB memory devices (brands) or USB memory cards cannot be used as
Protect key for the projector’s Security function.
CONVENIENT FEATURES 
						

							E-58
Using a USB Mouse
CONVENIENT FEATURES
Using a USB mouse gives you a smooth operation. A commercially avail-
able USB mouse is required.
USB
NOTE: There may be some brands of USB mouse that the projector does not
support.
Operate the Menus using the USB mouse
Mouse Cursor
When connecting a USB mouse to the projector, you get a mouse cur-
sor on the screen.
Unless you use your USB mouse within 10 seconds, the mouse cursor
disappears.
Menu Display
Clicking with a mouse button displays the menu.
Clicking  displays the pull-down menu. To close the menu, click any-
where in the background.
Adjusting and Setting Display
You can select a menu item and click with a mouse button to make
adjustments and setting.
Using the middle button on the mouse
The projector supports the middle button on your mouse.  With the
middle button you can use a scroll bar when it is available or click the
middle button to display or hide the Chalkboard toolbar.
Type A 
						

							E-59 Examples
Click (or press and hold) the mouse button  or  to adjust the bright-
ness. Or click and drag the mouse button on the slide bar horizontally
to adjust it.
To save the adjustments, click 
. The display is closed. If you click
anywhere in the background while displaying adjustment and setting
menu or dialog box, you will get the main menu at the clicking point.
CONVENIENT FEATURES
Changing Background Logo
You can change the default background logo using the PC Card Files fea-
ture.
NOTE: File size must be 256KB or less. Other file formats than JPEG and BMP
are not available.
1. From the menu, select [Tools] → [PC Card Files] to display a list of all the
files stored in the PC card so that you can select a file you want to use as a
background logo.
2. The Logo button allows you to select a background logo from graphic
files on a PC card and change to it as the background logo.
3. Use the SELECT 
 or  button to select a JPEG or BMP file for your
background logo. 
						

							E-60
4. Use the SELECT  and then   button to select Logo.
5. Press the ENTER on the remote control or the cabinet. You will get the confirmation dialog box.
6. Select OK and press the ENTER button. This completes changing a logo for the background.
*   Once  you h ave changed the ba ck g round from the logo to an other,
y ou cannot retu rn the logo to ba ck g round  even  by using  Facto ry
De fault.  T o do s o, repeat the ab ove step s. The logo file is included
on the supplied CD- ROM Projector User Suppo rtw are (/Logo/
nec_b_x.jpg).
CONVENIENT FEA TURES 
 Changing Background Logo