Dukane Imagepro 8761 Portable Projector Users Manual

E-31
INSTALLATION AND CONNECTIONS 
 Making Connections
RGB OUT
Connecting an External Monitor
You can connect a separate, external monitor to your projector to simulta-
neously view on a monitor the RGB analog image youre projecting. To do
so:
1. Turn off the power to your projector, monitor and computer.
2. Use a 15-pin cable to connect your monitor to the RGB OUT (Mini D-Sub
15 pin) connector on your projector.
3. Turn on the projector, monitor and the computer.
NOTE: The RGB OUT connector outputs RGB...

E-32
INSTALLATION AND CONNECTIONS 
 Making Connections
Connecting Your Video Equipment
RGB IN1 or IN2
AUDIO OUTRL
COMPONENT OUT
AUDIO INLR
DVD player
Connecting Your DVD Player
Audio Equipment Optional 15-pin-to-RCA
(female)
3 cable (ADP-CV1)
Audio cable (not supplied)
You can connect your projector to a DVD player with component output or
Video output. To do so, simply:
1. Turn off the power to your projector and DVD player.
2. If your DVD player has the component video (Y,Cb,Cr) output, use a com-...

E-33
INSTALLATION AND CONNECTIONS 
 Making Connections
VCR/ Laser disc player
Connecting Your VCR or Laser Disc Player
VIDEO INS-VIDEO IN
AUDIO OUTRL
VIDEO OUT
S-VIDEO OUT
AUDIO INLR
Audio equipment S-video cable (not supplied)
Video cable (not supplied)
Audio cable (not supplied)
Use common RCA cables (not provided) to connect your VCR, laser disc
player or document camera to your projector.
To make these connections, simply:
1. Turn off the power to the projector and VCR, laser disc player or docu-...

E-34 3. Turn on the projector and the VCR or laser disc player.
NOTE: Refer to your VCR or laser disc player owners manual for more informa-
tion about your equipments video output requirements.
NOTE: An image may not be displayed correctly when a Video or S-Video source
is played back in fast-forward or fast-rewind via a scan converter.
INSTALLATION AND CONNECTIONS 
 Making Connections 

E-35
INSTALLATION AND CONNECTIONS 
 Making Connections
Connecting the Supplied Power Cable
Connect the supplied power cable to the projector.
First connect the supplied power cables three-pin plug to the AC IN of the
projector, and then connect the other plug of the supplied power cable in
the wall outlet. 

E-36
PROJECTING AN IMAGE
(BASIC OPERATION)
Turning on the Projector
This section describes how to turn on the projector and to project a picture
onto the screen.
NOTE:
•When plugging in or unplugging the supplied power cable, make sure that the
main power switch is pushed to the off[O] position. Failure to do so may
cause damage to the projector.
•The projector has two power switches: main power switch and POWER but-
ton (POWER ON and OFF on the remote control)
•The projector has a feature to prevent...

E-37
PROJECTING AN IMAGE 
 Turning on the Projector
Note on Startup screen (Menu Language Select screen)
When you first turn on the projector, you will get the Startup screen. This
screen gives you the opportunity to select one of the seven menu lan-
guages: English, German, French, Italian, Spanish, Swedish and Japa-
nese.
To select a menu language, follow these steps:
1. Use the SELECT 
 or  button to select one of the seven languages for
the menu.
MENU
ENTERCANCEL
SELECT
2. Press the ENTER button to...

E-38 3. The Basic menu will be displayed in the language you have selected.
PROJECTING AN IMAGE 
 Turning on the Projector
MENU
ENTERCANCEL
SELECT
To close the menu, press the CANCEL button.
After this has been done, you can proceed to the advanced menu opera-
tion.
If you want, you can select the menu language later. See Language on
page E-93.
NOTE: To turn the projector on by plugging in the power cable, first turn on the
Main Power switch to ON and use the menu and enable the Auto Start feature.
(See...

E-39
PROJECTING AN IMAGE
Selecting a Source
Selecting the computer or video source
Using the Remote Control
ASPECT OFF
VIDEO
AUTO ADJ.S-VIDEO RGB1 RGB2
LASERON
3D REFORMHELPPOINTER
VOLUME MAGNIFY
PICTURE
PIC-MUTEVIEWERSLIDE
FOLDER
SLIDE
LIST
POWER
FREEZE
NOTE: If no input signal is available, the projector will display a blue back-
ground (factory preset).
Selecting from Source ListPress any one of the RGB1,
RGB2, VIDEO, S-VIDEO or
VIEWER buttons.
Press and quickly release the SOURCE button on the...

E-40 Press and hold the SOURCE button for a minimum of ONE second,
the projector will search for the next available input source. Each time
you press and hold the SOURCE button, the input source will change
as follows:
→ RGB1 → RGB2 → Video → S-Video → Viewer 
If no input signal is present, the input will be skipped. When the input
source you wish to project is displayed, release the button.
Press the ENTER button.
PROJECTING AN IMAGE 
 Selecting a Source
Detecting the Signal Automatically