Dukane Imagepro 8755g-Rj Projector Users Manual

15

Date/Time Settings
Displays and configures the date and time settings.
ItemDescription
Current DateConfigures the current date in year/month/day format.
Current TimeConfigures the current time in hour:minute:second format.
Configuring and Controlling the Projector via a Web Browser
Daylight Savings TimeClick the [ON] check box to enable daylight savings time and set the following items.
StartConfigures the date and time daylight savings time begins.
MonthConfigures the month daylight savings time...

16

Date/Time Settings (Continued)
Click the [Apply] button to save the settings.
ItemDescription
Time differenceConfigures the time difference.Set the same time difference as the one set on your PC. If unsure, consult your IT manager.
SNTP Server IP Address
Configures the SNTP server address in IP format.• The address allows not only IP address but also domain name if the valid DNS server is setup in the Network Settings. The maximum length of host or domain name is up to 255 characters....



Security Settings
ItemDescription
Administrator authorityConfigures the Administrator ID and password.
Administrator IDConfigures the Administrator ID.The length of the text can be up to 32 alphanumeric characters.
Administrator Password
Configures the Administrator password.The length of the text can be up to 255 alphanumeric characters.
Re-enter Administrator PasswordRe-enter the above password for verification.
Displays and configures passwords and other security settings.
User...



Click the [Apply] button to save the settings.
Authentication Password
Configures the authentication password.The length of the text can be up to 32 alphanumeric characters.
Re-enter Authentication PasswordRe-enter the above password for verification.
SNMPConfigures the community name if SNMP is used.
Community NameConfigures the community name.The length of the text can be up to 64 alphanumeric characters.
• The new configuration settings are activated after restarting the 
network...

19

Projector Control
The items shown in the table below can be 
performed using the Projector Control menu.
Select an item using the up and down arrow keys 
on the PC.
Most of the items have a submenu.
Refer to the table below for details.
Controls the projector.
ItemDescription
Main
PowerTurns the power on/off.
Input SourceSelects the input source.
Picture ModeSelects the picture mode setting.
Blank On/OffTurns Blank on/off.
MuteTurns Mute on/off.
FreezeTurns Freeze on/off.
Magnify
Controls the...

20

Projector Control (Continued)
ItemDescription
Image
AspectSelects the aspect ratio.
Over ScanAdjusts the over-scan setting.
V PositionAdjusts the vertical position.
H PositionAdjusts the horizontal position.
H PhaseAdjusts the horizontal phase.
H SizeAdjusts the horizontal size.
Auto Adjust ExecutePerforms the automatic adjustment.
Input
ProgressiveSelects the progressive setting.
Video NRSelects the video noise reduction setting.
Color SpaceSelects the color space setting.
ComponentSelects the...



Option
LanguageSelects the language for the OSD.
Menu Position VAdjusts the vertical Menu position.
Menu Position HAdjusts the horizontal Menu position.
BlankSelects the Blank mode.
StartupSelects the start-up screen mode.
MyScreen LockTurns MyScreen lock function on/off.
MessageTurns the message function on/off.
Auto SearchTurns the automatic signal search function on/off.
Auto KeystoneTurns the automatic keystone distortion correction function on/off.
Auto onTurns the AUTO ON function...



Network Restart
Restarts the projector’s network connection.
ItemDescription
RestartRestarts the projector’s network connection in order to activate new configuration settings.
• Restarting requires you to re-logon in order to further control or configure 
the projector via a web browser. Wait  minute or more after clicking 
[Restart] button 
to log on again in order to further control or configure the projector  via a web browser.
• A link to the logon screen (6 : Fig. ) is...

23

E-mail Alerts
The projector can automatically send an alert message to the specified e-mail 
addresses when the projector detects a certain condition that is requiri\
ng 
maintenance or detected an error.
• Up to five e-mail addresses can be specified.
• The projector may be not able to send e-mail if the projector suddenly loses 
power.
NOTE
Mail Settings
To use the projector’s e-mail alert function please configure the following items 
through a web browser.
Example: If the IP address of the...

4

 8)  Configure the Failure/Warning Alerts via E-mail settings. Click [Alert Settings] 
on the main menu.
 9)   Select and configure each alert item. Refer to 
Alert Settings in "Configuring 
and Controlling the Projector via a Web Browser" for further information (
11).
10) Click the [Apply] button to save the settings.
Failure/Warning e-mails are formatted as follows:
Subject line  :   
Text   : 
   Date  
  Time  
  IP Address  
  MAC Address  
Mail Settings (Continued)
E-mail Alerts