Dukane Imagepro 8755d-Rj Portable Lcd Projector Users Manual
Have a look at the manual Dukane Imagepro 8755d-Rj Portable Lcd Projector Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Dukane manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 86
84
Failure & Warning Alerts via E-mail
8) Configure the Failure/Warning Alerts via E-mail settings. Click [Alert Settings]
on the main menu.
9) Select and configure each alert item. Refer to [Alert Settings] in [Configuring and Controlling the Projector via a Web Browser]
for further information.
10) Click the [Apply] button to save the settings.
Failure/Warning e-mails are formatted as follows:
Subject line :
Text :
Date
Time
IP Address
MAC Address
Mail Settings (Continued)](http://img.usermanuals.tech/thumb/5762/88602/w64_dukane-imagepro-8755d-rj-manual_d-85.png "Page 86
84
Failure & Warning Alerts via E-mail
8) Configure the Failure/Warning Alerts via E-mail settings. Click [Alert Settings]
on the main menu.
9) Select and configure each alert item. Refer to [Alert Settings] in [Configuring and Controlling the Projector via a Web Browser]
for further information.
10) Click the [Apply] button to save the settings.
Failure/Warning e-mails are formatted as follows:
Subject line :
Text :
Date
Time
IP Address
MAC Address
Mail Settings (Continued)")
![Page 92
90
e-Shot (Still Image Transfer) Display
e-Shot (Still Image Transfer) Settings (Continued)
When the authentication setting is enabled, the following settings are required.
6) Click [Security Settings] on the main menu.
7) Select
[Network Control] and enter the desired authentication password. *
see Note1
8) Click the [Apply] button to save the settings. * see Note2
• The Authentication Password will be the same for [Network Control
Port1 (Port: 23)], [Network Control Port2 (Port: 9715)], and...](http://img.usermanuals.tech/thumb/5762/88602/w64_dukane-imagepro-8755d-rj-manual_d-91.png "Page 92
90
e-Shot (Still Image Transfer) Display
e-Shot (Still Image Transfer) Settings (Continued)
When the authentication setting is enabled, the following settings are required.
6) Click [Security Settings] on the main menu.
7) Select
[Network Control] and enter the desired authentication password. *
see Note1
8) Click the [Apply] button to save the settings. * see Note2
• The Authentication Password will be the same for [Network Control
Port1 (Port: 23)], [Network Control Port2 (Port: 9715)], and...")
![Page 94
92
Command Control via the Network
Command Control Settings (Continued)
When the authentication setting is enabled, the following settings are required.
(20)
7) Click [Security Settings] on the main menu.
8) Click
[Network Control] and enter the desired authentication password. * See
Note1.
9) Click the [Apply] button to save the settings. * See Note2.
• The Authentication Password will be the same for [Network Control
Port1 (Port: 23)], [Network Control Port2 (Port: 9715)], and [Image Transfer...](http://img.usermanuals.tech/thumb/5762/88602/w64_dukane-imagepro-8755d-rj-manual_d-93.png "Page 94
92
Command Control via the Network
Command Control Settings (Continued)
When the authentication setting is enabled, the following settings are required.
(20)
7) Click [Security Settings] on the main menu.
8) Click
[Network Control] and enter the desired authentication password. * See
Note1.
9) Click the [Apply] button to save the settings. * See Note2.
• The Authentication Password will be the same for [Network Control
Port1 (Port: 23)], [Network Control Port2 (Port: 9715)], and [Image Transfer...")
89
e-Shot (Still Image Transfer) Display
e-Shot (Still Image Transfer) Display
The projector can display a still image that is transferred via the network.
Communication Port
The following port is used for e-Shot.
TCP #9716
(9)
e-Shot (Still Image Transfer) Settings
Configure the following items from a web browser when e-Shot is used.
Example: If the IP address of the projector is set to 192.168.1.10:
• e-Shot is not available via communication ports which are used for
the command control (TCP #23 and TCP #9716). NOTE
1) Enter [https://192.168.1.10] into the address bar of the web browser.
2) Enter the Administrator ID and Password and
click [Logon].
3) Click [Port settings] on the main menu.
4) Click the
[Enable] check box to open the
[Image Transfer Port (Port: 9716)]
. Click the
[Enable] check box for the [Authentication]
setting when authentication is required,
otherwise clear the check box.
5) Click the [Apply] button to save the settings.
90 e-Shot (Still Image Transfer) Display e-Shot (Still Image Transfer) Settings (Continued) When the authentication setting is enabled, the following settings are required. 6) Click [Security Settings] on the main menu. 7) Select [Network Control] and enter the desired authentication password. * see Note1 8) Click the [Apply] button to save the settings. * see Note2 • The Authentication Password will be the same for [Network Control Port1 (Port: 23)], [Network Control Port2 (Port: 9715)], and [Image Transfer Port (Port: 9716)]. NOTE1 • The new configuration settings are activated after restarting the network. Restart the network connection when any configuration settings are changed. The network connection can be restarted using [Network Restart] on the main menu. NOTE2 e-Shot (Still Image Transfer) Transmission e-Shot transmission requires an exclusive application for your PC. You can download it from the Hitachi web site. Refer to the manual for the application for instructions.
91
Command Control via the Network
Command Control via the Network
You can configure and control the projector via the network using RS-232C
commands.
Communication Port
The following two ports are assigned for the command control.
TCP #23
TCP #9715
Command Control Settings
Configure the following items from a web browser when command control is used.
Example: If the IP address of the projector is set to 192.168.1.10:
• Command control is not available via communication port (TCP
#9716) that is used for the e-Shot transmission function. NOTE
1) Enter [https://192.168.1.10] into the address bar of the web browser.
2) Enter the Administrator ID and Password and click
[Logon].
3) Click [Port settings] on the main menu.
4) Click the [Enable] check box to open [Network Control Port (Port: 23)] to use TCP #23. Click the
[Enable] check box for the [Authentication] setting when
authentication is required, otherwise clear the check box.
5) Click the
[Enable] check box to open [Network Control Port (Port: 9715)] to
use TCP #9715. Click the
[Enable] check box for the [Authentication] setting
when authentication is required, otherwise clear the check box.
6) Click the [Apply] button to save the settings.
(9)
92 Command Control via the Network Command Control Settings (Continued) When the authentication setting is enabled, the following settings are required. (20) 7) Click [Security Settings] on the main menu. 8) Click [Network Control] and enter the desired authentication password. * See Note1. 9) Click the [Apply] button to save the settings. * See Note2. • The Authentication Password will be the same for [Network Control Port1 (Port: 23)], [Network Control Port2 (Port: 9715)], and [Image Transfer Port (Port: 9716)]. NOTE1 • The new configuration settings are activated after restarting the network. Restart the network when any configuration settings are changed. The network connection can be restarted using [Network Restart] on the main menu. NOTE2
93
Command Control via the Network
Command format
Command formats differ among the different communication ports.
TCP #23
You can use the RS-232C commands without any changes. The reply data format
is the same as the RS-232C commands. However, the following reply will be sent
back in the event of authentication failure when authentication is enabled.
ReplyError code
0x1F0x040x00
TCP #9715
Send Data format
The following formatting is added to the header (0x02), Data length (0x0D),
Checksum (1byte) and Connection ID (1 byte) of the RS-232C commands.
HeaderData lengthRS-232CcommandChecksumConnection ID
0x020x0D13 bytes1 byte1 byte
Header → 0x02, Fixed
Data length → RS-232C commands byte length (0x0D, Fixed)
RS-232C commands → RS-232C commands that start with 0xBE 0xEF (13 bytes)
Check Sum → This is the value to make zero on the addition of the lower
8 bits from the header to the checksum.
Connection ID → Random value from 0 to 255 (This value is attached to
the reply data)
94 Command Control via the Network Reply Data format The connection ID (the data is same as the connection ID data on the sending data format) is attached to the RS-232C commands reply data. ReplyConnection ID 0x061 byte ReplyConnection ID 0x151 byte ReplyError codeConnection ID 0x1C2 bytes1 byte ReplyDataConnection ID 0x1D2 bytes1 byte ReplyStatus codeConnection ID 0x1F2 bytes1 byte ReplyAuthentication Error codeConnection ID 0x1F0x040x001 byte
Command Control via the Network Automatic Connection Break The TCP connection will be automatically disconnected after there is no communication for 30 seconds after being established. Authentication The projector does not accept commands without authentication success when authentication is enabled. The projector uses a challenge response type authentication with an MD5 (Message Digest 5) algorithm. When the projector is using a LAN, a random eight bytes will be returned if authentication is enabled. Bind this received 8 bytes and the authentication password and digest this data with the MD5 algorithm and add this in front of the commands to send. Following is a sample if the authentication password is set to “password” and the random eight bytes are “a572f60c”. 1) Select the projector. 2) Receive the random eight bytes “a572f60c” from the projector. 3) Bind the random eight bytes “a572f60c” and the authentication password “password” and it becomes “a572f60cpassword”. 4) Digest this bind “a572f60cpassword” with MD5 algorithm. It will be “e3d97429adffa11bce1f7275813d4bde”. 5) Add this “e3d97429adffa11bce1f7275813d4bde” in front of the commands and send the data. Send “e3d97429adffa11bce1f7275813d4bde”+command. 6) When the sending data is correct, the command will be performed and the reply data will be returned. Otherwise, an authentication error will be returned. 95
1 Projector CP-S24/ , 8755D-RJ, & 8065 User's Manual – Operating Guide Technical Example of computer signal Resolution (H x V)H. frequency (kHz)V. frequency (Hz)RatingSignal mode 720 x 40037.985.0VESATEXT 640 x 48031.559.9VESAVGA (60Hz) 640 x 48037.972.8VESAVGA (72Hz) 640 x 48037.575.0VESAVGA (75Hz) 640 x 48043.385.0VESAVGA (85Hz) 800 x 60035.256.3VESASVGA (56Hz) 800 x 60037.960.3VESASVGA (60Hz) 800 x 60048.172.2VESASVGA (72Hz) 800 x 60046.975.0VESASVGA (75Hz) 800 x 60053.785.1VESASVGA (85Hz) 832 x 62449.774.5Mac 16” mode 1024 x 76848.460.0VESA XGA (60Hz) 1024 x 76856.570.1VESAXGA (70Hz) 1024 x 76860.075.0VESAXGA (75Hz) 1024 x 76868.785.0VESAXGA (85Hz) 1152 x 864 67.575.0VESA SXGA (75Hz) 1280 x 96060.060.0VESASXGA (60Hz) 1280 x 102464.060.0VESASXGA (60Hz) 1280 x 102480.075.0VESASXGA (75Hz) 1280 x 102491.185.0VESASXGA (85Hz) 1600 x 120075.060.0VESAUXGA (60Hz) NOTE • Be sure to check jack type, signal level, timing and resolution before connecting this projector to a computer. • Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector. • Depending on the input signal, full-size display may not be possible in some cases. Refer to the number of display pixels above. • Although the projector can display signals with resolution up to UXGA (1600x1200), the signal will be converted to the projector’s panel resolution before being displayed. The best display performance will be achieved if the resolutions of the input signal and projector panel are identical. • Automatically adjustment may not function correctly with some input signals. • The image may not be displayed correctly when the input sync signal is a composite sync or a sync on G. 8755D 8997
98
Example of computer signal
Initial set signals
The following signals are used for the initial settings. The signal timing of some
computer models may be different. In such case, adjust the items V POSITION
and H POSITION in the IMAGE menu.
Back porch (B) Front porch (D) Back porch (b) Front porch (d)
Display interval (C) Display interval (c)
Data Data
H. Sync. V. Sync.
Sync (A) Sync (a)
Computer/SignalHorizontal signal timing (μs)Computer/SignalVertical signal timing (lines)(A)(B)(C)(D)(a)(b)(c)(d)
TEXT2.03.020.31.0TEXT3424001
VGA (60Hz)
3.81.925.40.6 VGA (60Hz)23348010
VGA (72Hz)
1.34.120.30.8 VGA (72Hz)3284809
VGA (75Hz)
2.03.820.30.5 VGA (75Hz)3164801
VGA (85Hz)
1.62.217.81.6 VGA (85Hz)3254801
SVGA (56Hz)
2.03.622.20.7 SVGA (56Hz)2226001
SVGA (60Hz)
3.22.220.01.0 SVGA (60Hz)4236001
SVGA (72Hz)
2.41.316.01.1 SVGA (72Hz)62360037
SVGA (75Hz)
1.63.216.20.3 SVGA (75Hz)3216001
SVGA (85Hz)
1.12.714.20.6 SVGA (85Hz)3276001
Mac 16" mode1.13.914.50.6Mac 16" mode3396241
XGA (60Hz)
2.12.515.80.4 XGA (60Hz)6297683
XGA (70Hz)
1.81.913.70.3 XGA (70Hz)6297683
XGA (75Hz)
1.22.213.00.2 XGA (75Hz)3287681
XGA (85Hz)
1.02.210.80.5 XGA (85Hz)3367681
1152 x 864
(75Hz)1.22.410.70.6 1152 x 864 (75Hz)3328641
1280 x 960 (60Hz)1.02.9
11.90.91280 x 960 (60Hz)3369601
1280 x 1024 (60Hz)1.02.311.90.41280 x 1024 (60Hz)33810241
1280 x 1024 (75Hz)1.11.89.50.11280 x 1024 (75Hz)33810241
1280 x 1024 (85Hz)1.01.48.10.41280 x 1024 (85Hz)34410241
1600 x 1200 (60Hz)1.21.99.90.41600 x 1200 (60Hz)34612001