Dukane Imagepro 8711 Lcd Projector Users Manual

3
1Connect your devices to the projector
Connect your computer, VCR and/or other
devices you will be using to the projector.
Insert the batteries into the remote
control2
3Connect the power cord
(1) Connect the connector of the electrical power cord to the AC inlet of the main unit.
(2) Firmly plug the power cords plug into the outlet
WARNINGPrecautions to observe in regards to the power cord:Please use extra
caution when connecting the projectors power cord as incorrect or faulty
connections may...

4
PART NAMESTHE PROJECTORIndicates the
corresponding
reference page
Air filter
Elevator button
Elevator screw
COMPONENT indicator
S-VIDEO indicator
VIDEO indicator
DVI indicator
BNC indicator
RGB indicator
INPUT dial
ZOOMbutton
FOCUS button
RESET button
MENU button
ONE TOUCH button
KEYSTONE button
TEMP indicator
LAMP indicator
Lens
Remote sensor
Lens cap
Elevator feet
Remote sensor
S-VIDEO IN port 
VIDEO IN port 
DVI port 
RGB port 
BNC port 
AUDIO IN...

5
THE REMOTE CONTROL
ZOOMbuttons
Right mouse button
VIDEO button
LASER INDICATORRGB button
LASER button
FOCUS buttons
PAGE buttons
BLANK button
ASPECT button
ESC button
MENU button
POSITION button
MAGNIFY buttons
KEYSTONE button
REMOTE CONTROL port
Left /Right
Key buttons
Lever switch (*)
RESET button
AUTO button
PinP button
VOLUME button
MUTE button
FREEZE button
ONE TOUCH button
STANDBY/ONVIDEO
UP
DOWN
BLANK
ASPECT
PUSHLASER
INDICATOR
LASER
RGB
FOCUS...

6
Adjusting the Projectors Elevator Feet 
1Press and hold in the elevator
buttons
2Raise or lower the projector to the
desired height and then release the
elevator buttons
When you release the elevator buttons, the elevator
feet will lock into position.
3Turn the elevator screw to fine tune. If the surface on which the projector is placed, or the screen is tilted, use the
elevator feet and elevator screw to adjust the projection angle of the main unit.
The adjustment range of the elevator feet is 0 to 9...

7
Refer to the illustrations and tables below to determine the screen size and
projection distance.
Adjusting the Screen Size and Projection Distance
Top view
a
cLens center
The screen
Side view
Top view
a
c
bLens center
The screen
Side view
If 4:3 aspect ratio
If 16:9 aspect ratio
4
3
916
The values shown in the table are calculated for a full size screen
a:Distance from the projector to the screen (±10%)
b:Distance from the lens center to the bottom of the screen (±10%)
c:Distance from the lens center...

8
Display monitors
DVD players
VCRs
Laptop computers
Desktop computers Indicates the
corresponding
reference page
ATTENTIONPrecautions to observe when connecting other devices to the projector
•Whenever attempting to connect other devices to the projector, please thoroughly
read the manual of each device to be connected.
•TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to
connect a live device to the projector may generate extremely loud noises or other
abnormalities...

9
Ports and Cables
Refer to the table below to find out which projector port and cable to use for connecting a
given device. Use this table for determining which cables to prepare.
* Before using the BNC port, change RGB input to component video input on the BNC menu item of
the INPUT menu.
About Plug-and-Play Capability
• This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by connecting
this projector to computers that are VESA DDC (display data channel) compatible. Please...

10Laptop computer
CONNECTING YOUR DEVICES (continued)
Connecting to a Computer
ATTENTIONWhenever attempting to connect a laptop computer to the projector,
be sure to activate the laptops RGB external image output (set the laptop to CRT
display or to simultaneous LCD and CRT display). For details on how this is done,
please refer to the instruction manual of the corresponding laptop computer.
• Some computers may have multiple display screen modes. Use of some of these
modes will not be possible with this...

11
Desktop computer Desktop computerBNC Input DVI Input
Connecting to a Computer (continued)
BNC cable
#
  VIDEO IN R-AUDIO IN-L
S-VIDEO IN RGB
BNC AUDIO IN USBAUDIO OUT R/CR/PRG/Y B/Ca/Pa H VY
12  DV I
 RGB   OUT  CONTROL
CR/PRCa/PaCOMPONENT   VIIDEO REMOTE
CONTROL
#
AUDIO cable
(Stereo mini)
AUDIO OUT
BNC OUT
DVI cable
#
  VIDEO IN R-AUDIO IN-L
S-VIDEO IN RGB
BNC AUDIO IN USBAUDIO OUT R/CR/PRG/Y B/Ca/Pa H VY
12  DV I
 RGB   OUT  CONTROL
CR/PRCa/PaCOMPONENT   VIIDEO REMOTE
CONTROL
#

AUDIO cable
(Stereo...

12DVD playerVCR
Connecting to a DVD Player Connecting to a VCR
CONNECTING YOUR DEVICES (continued)
Connecting to a Display Monitor
Display monitor
RGB cable3(#
*/

  VIDEO IN R-AUDIO IN-L
S-VIDEO IN RGB
BNC AUDIO IN USBAUDIO OUT R/CR/PRG/Y B/Ca/Pa H VY
12  DV I
 RGB   OUT  CONTROL
CR/PRCa/PaCOMPONENT   VIIDEO REMOTE
CONTROL

#$
  VIDEO IN R-AUDIO IN-L
S-VIDEO IN RGB
BNC AUDIO IN USBAUDIO OUT R/CR/PRG/Y B/Ca/Pa H VY
12  DV I
 RGB   OUT  CONTROL
CR/PRCa/PaCOMPONENT   VIIDEO REMOTE
CONTROL###$...