Dukane 8776 Projector User Manual

9

PICTURE Menu
ItemDescription
MY MEMORY
Selecting a mode of MY MEMORY using the buttons ▲/▼ and then pressing the button ► or the ENTER button performs each function.
LOAD   ó LOAD  ó LOAD3 ó LOAD4
SAVE4 óSAVE3 ó SAVE  ó SAVE
This projector has 4 numbered memories for adjustment data.  Performing the LOAD  , LOAD  , LOAD3 or LOAD4 loads the data on the memory whose number corresponds to the command’s number, and adjusts the picture automatically depending on the...

30

IMAGE Menu
IMAGE Menu
ItemDescription
ASPECT
Using the buttons ▲/▼ switches the mode for aspect ratio. For an RGB signalNORMAL ó 4:3 ó  6:9 ó SMALL         
For a video signal, s-video signal or component video signal4:3 ó  6:9 ó  4:9 ó SMALL     
For a no signal4:3 (fixed)• The NORMAL mode keeps the original aspect ratio of the signal.
OVER SCAN
Using the buttons ▲/▼ adjusts the over-scan ratio.Large (It reduces picture) ó Small (It magnifies picture)• This item can be selected only...

3

IMAGE Menu
ItemDescription
H SIZE
Using the buttons ▲/▼ adjusts the horizontal size.
Large ó Small
• This item can be selected only for an RGB signal.
• When this adjustment is excessive, the picture may not be displayed correctly. In such a case, please reset the adjustment by pressing the RESET button on the remote control during this operation.
AUTO ADJUST EXECUTE
Selecting this item performs the automatic adjustment feature.
For an RGB signalThe vertical position, the horizontal position,...

3

INPUT Menu
INPUT Menu
ItemDescription
PROGRESSIVE
Using the buttons ▲/▼ switches the progress mode.
TV ó FILM ó TURN OFF
• This function is performed only for an interlaced signal of a VIDEO input, an S-VIDEO input or COMPONENT VIDEO input of 5  5i (480i) or 6 5i (576i) signal.
• When TV or FILM is selected, the screen image will be sharp. FILM adapts to the   -3 Pull-Down conversion system. But these may cause a certain defect (for example, jagged line) of the picture for a quick...

33

ItemDescription
COMPONENT
Using the buttons ▲/▼ switches the function of COMPONENT VIDEO port. 
COMPONENT ó SCART RGB 
When the SCART RGB is selected, the COMPONENT VIDEO port function as a port for a SCART RGB signal input and VIDEO port function as a port for SCART RGB sync input. A SCART adapter and SCART cable realize a SCART RGB input to the projector. For details, contact your dealer.
VIDEO FORMAT
Set the video format for the s-video port and video port.
( ) Use the ◄/► buttons to select...

34

INPUT Menu
ItemDescription
RESOLUTION*2
The resolution for the RGB  and RGB   input signals can be set on this projector.
(1) In the INPUT menu select RESOLUTION using the ▲/▼ buttons and press the ► button.The RESOLUTION menu will be displayed.
( )  In the RESOLUTION menu select the resolution you wish to display using the ▲/▼ buttons. Selecting AUTO will set a resolution appropriate to the input signal.
(3) Pressing the ► or Enter button when selecting a STANDARD resolution will...

35

SETUP Menu
SETUP Menu
ItemDescription
AUTO KEYSTONE EXECUTE
Selecting this item performs the Automatic keystone distortion correction. Projector automatically corrects vertical keystone distortion due to the (forward/backward) setup angle by itself.
• This function will be executed only once when selected in the Menu. When the slant of the projector is changed, executes this function again.
• When V:INVERT or H&V:INVERT is selected to the MIRROR item in the SETUP menu, if the projector screen is...

36

SETUP Menu
SETUP Menu (continued)
ItemDescription
MIRROR
Using the buttons ▲/▼ switches the mode for mirror status.
NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT 
If Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (48) will be displayed when projector is restarted after the power switch is turned off.
VOLUMEUsing the buttons ▲/▼ adjusts the volume.
High ó Low
AUDIO
Allocates the audio ports.
Choose a picture input port using the buttons ▲/▼ (1), then select the...

37

SCREEN Menu
SCREEN Menu
ItemDescription
LANGUAGE
Using the buttons ▲/▼ switches the OSD (On Screen Display) language.
SUOMI ó POLSKI ó TÜRKÇE
ENGLISH ó FRANÇAIS ó DEUTSCH ó ESPAÑOL ó ITALIANO
NORSK ó NEDERLANDS ó PORTUGUÊS ó 日本語
    ó    ó        ó SVENSKA ó
MENU POSITIONUsing the buttons ◄/►/▲/▼ adjusts the menu position.To quit the operation, press the MENU button on the remote control or keep no operation for about  0 seconds.
BLANK
Using the buttons ▲/▼ switches the mode for the blank...

38

SCREEN Menu
ItemDescription
START UP
Using the buttons ▲/▼ switches the mode for the start-up screen.The start-up screen is a screen displayed when no signal or an unsuitable signal is detected.MyScreen ó ORIGINAL ó TURN OFF
    MyScreen is a screen you can register as a desired screen.The ORIGINAL screen is the existing standard screen. When TURN OFF is selected, the BLACK screen is used.• To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLANK screen...