Dukane 8776 Projector User Manual

9

Adjusting the projector's elevator
CAUTION  ►If you press the elevator button without holding the projector, 
the projector might crash down, overturn, smash your fingers and possibly 
result in malfunction. To prevent damaging the projector and injuring yourself, 
always hold the projector whenever using the elevator buttons to adjust \
the 
elevator feet.
►Do not incline the projector rightward or leftward. Also do not incline it 
backward or forward exceeding 30 degrees. Exceeding these range...

0

Setting up
Using the Security Bar
WARNING  ►Do not use the security bar to prevent the projector from 
falling. Dropping or knocking over the projector may cause damage or inj\
ury.
A commercial anti-theft chain or wire can be attached to the security bar\
 on the 
projector. 
. How to attach 
An anti-theft chain or wire can be 
attached as shown in the illustration. 
(Anti-theft chains or wires of up to 
0mm in diameter can be used)
Anti-theft chain or wire[sold separately]
Security...



Setting up
Connecting your devices
CAUTION  ►Turn off all devices prior to connecting them to the projector. 
Attempting to connect a live device to the projector may generate extrem\
ely 
loud noises or other abnormalities that may result in malfunction and/or damage 
to the device and/or projector.
►Use the accessory cable or a designated-type cable for the connection. 
Some cables have to be used with core set. A too long cable may cause a 
certain picture degradation. Please consult with...



Setting up
Examples of connection with a computer 
* In the default setting, the AUDIO IN  port is the audio port for the RGB IN  , and the 
AUDIO IN  port is the audio port for the RGB IN   ports. To change the settings, refer to the 
AUDIO item in the SETUP menu. (36)
Y R
L
AUDIO IN3
AUDIO IN1AUDIO OUT
USB
RGB OUT
AUDIO IN2
VIDEOS-VIDEO
CB/PB
CR/PRCONTROL
RGB IN2RGB IN1
K
Y R
L
AUDIO IN3
AUDIO IN1AUDIO OUT
USB
RGB OUT
AUDIO IN2
VIDEOS-VIDEO
CB/PB
CR/PRCONTROL
RGB...

3

Y R
L
AUDIO IN3
AUDIO IN1AUDIO OUT
USB
RGB OUT
AUDIO IN2
VIDEOS-VIDEO
CB/PB
CR/PRCONTROL
RGB IN2RGB IN1
K
Y R
L
AUDIO IN3
AUDIO IN1AUDIO OUT
USB
RGB OUT
AUDIO IN2
VIDEOS-VIDEO
CB/PB
CR/PRCONTROL
RGB IN2RGB IN1
K
Y R
L
AUDIO IN3
AUDIO IN1AUDIO OUT
USB
RGB OUT
AUDIO IN2
VIDEOS-VIDEO
CB/PB
CR/PRCONTROL
RGB IN2RGB IN1
K

Setting up
Examples of connection with a VCR/DVD player
Audio (R) out
Video out
Audio cable 
Audio/Video cable 
Audio (R) out
S-Video outS-Video cable 
Audio (R) out  
Component...

4

Connecting power supply
WARNING  ►Please use extra caution when connecting the power cord, as 
incorrect or faulty connections may result in fire and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, contact 
your dealer to newly get correct one.
• Only plug the power cord into an outlet rated for use with the powe\
r cord's 
specified voltage range.
• Never modify the power cord. Never attempt to defeat the ground con\
nection 
of the...

5

Putting batteries
WARNING  ►Always handle the batteries with care and use them only as 
directed. Battery may explode if mistreated. Do not recharge, disassembl\
e or 
dispose of in fire. 
And also improper use may result in cracking or leakage, which could res\
ult in 
fire, injury and/or pollution of the surrounding environment.
• Be sure to use only the batteries specified. Do not use batteries of dif ferent 
types at the same time. Do not mix a new battery with used one. 
• Make sure the...

6
Using the remote control
CAUTION  ►Be careful in handling the remote control.
• Do not drop or expose the remote control to physical impact.
• Do not get the remote control wet or place it on wet objects. It ma\
y result in 
malfunction.
• Remove the batteries from the remote control and store them in a safe place if 
you won’t be using the remote control for an extended period. 
• Replace the batteries whenever the remote control starts malfunctio\
ning. 
• When strong lights (such as direct...

7
Power on/off
Power on/off
WARNING  ►When the power is on, a strong light is emitted. Do not look into 
the lens of projector. Also do not peep at the inside of projector through a hole.
NOTE  • Turn the power on/off in right order. Please power on the projector prior 
to the connected devices. Power off the projector later than the connected devices.
Turning on the power
. Make sure that the power cord is firmly and correctly connected to the projector and the outlet.
. Remove the lens...

8

Operating
Operating
Adjusting the volume
. Press the VOLUME button on the remote control. 
A dialog will appear on the screen to aid you in adjusting the volume.
. Use the cursor buttons ▲/▼ to adjust the volume.
To close the dialog and complete the operation, press the 
VOLUME button again. Even if you don’t do anything, the 
dialog will automatically disappear after a few seconds. 
Temporarily muting the sound
. Press the MUTE button on the remote control.  
A dialog will appear...