Dream Vision Yunzi+ Family User Manual

6.0  MENU STRUCTURE
R699823 - Yunzi Family User Manual 21 
Picture AdjustAdvancedClear Motion Drive: Off
Low
High
Inverse Telecine
Lens Aperture -15 +0
Lamp Power Low / High
Reset ProfileConfirm
Input SignalHDMIInput levels (16 - 235) Standard
(0 - 255) Enhanced
(16 - 255) Super White
Level Check displays pattern
Color Space Auto
YCbCr(4:4:4)
YCbCr(4:2:2)
RGB
Control with HDMI (CEC) On, Off
COMP.Color Space YCbCr 
RGB
Picture PositionHorizontal
Vertical
Aspect
if 3D, only 16:9 is availableVideo 4:3 / 16:9...

7.0  PICTURE ADJUST SETTINGS
22 R699823 - Yunzi Family User Manual
7.0 PICTURE ADJUST SETTINGS
7.1 Picture Modes and Color Profiles
The preset Picture Modes are available and they can be applied to any input. A picture mode retains the picture
adjustments. Adjusting the Picture Mode according to the source content:
There are 5 additionnal User defined profiles.
7.2 Contrast
The contrast function is used to adjust the contrast between the light and dark areas of the displayed image. A...

7.0  PICTURE ADJUST SETTINGS
R699823 - Yunzi Family User Manual 23 
correct contrast setting is important for good image reproduction. Adjust the Contrast value between -50 and 50.
7.3 Brightness
The brightness function is used to adjust the overall light output. Adjust the Brightness value between -50 and 50.
7.4 Color
The Color function (or Saturation) is used to adjust the saturation levels. Adjust the Color value between -50 and 50.
7.5 Tint
The hue function is used to adjust the color tint to obtain...

7.0  PICTURE ADJUST SETTINGS
24 R699823 - Yunzi Family User Manual
7.8 Advanced Picture Settings
Sharpness
•Detail Enhancement: brings out small details in the image.
•Sharpness: Emphasizes the outline of the picture.
Noise Reduction
•RNR: Random Noise Reduction. You can set it from 0 up to 16 to reduce the picture random noise.
•MNR: Mosquito Noise Reduction function is used to reduce the Mosquito noise on the picture, generally found in
compressed digital video signals such as television broadcast or...

8.0  INPUT SIGNAL SETTINGS
R699823 - Yunzi Family User Manual 25 
High: lamp is set to 230W.
To avoid any damage to the lamp, you can’t change the lamp power within 90 seconds from the projector startup or
60 seconds after lamp power change.
7.9 Reset Picture Profile
Prompt a confirmation to reset the current Picture Profile to default settings.
8.0 INPUT SIGNAL SETTINGS
8.1 HDMI Inputs
This menu is available if the selected active input is HDMI1 or HDMI2.
Input
•Auto: The input dynamic range is...

8.0  INPUT SIGNAL SETTINGS
26 R699823 - Yunzi Family User Manual
For Video  sources
a) 4:3. The original source is considered as 4:3 format. Generally SDTV broadcasts.
b) 16:9. The picture size is 16:9, generally most recent DVDs, Blu-Ray discs or HDTV broadcasts.
c) Zoom. The zoom function is useful to zoom in the picture and eliminate black bars.
For PC sources
a) Auto. Zoom the picture to fill either the screen height or the screen base which ever happens first.
b) 1:1 mode, pixel to pixel mapping, no...

9.0  INSTALLATION SETTINGS
R699823 - Yunzi Family User Manual 27 
Because the 2D to 3D Conversion may not detect the correct depth of the picture elements, you can use this
function to enhance the depth perception during the conversion. Adjust setting from 1 up to 5.
Subtitle Adjust (2D to 3D Conversion is On)
Use this function to automatically identify subtitles during 2D to 3D conversion. There may be instances where
automatic identification does not work, or video images are accidentally identified as...

9.0  INSTALLATION SETTINGS
28 R699823 - Yunzi Family User Manual
9.2 Pixel Adjust
Each color can be adjust within 1 pixel steps in the horizontal and vertical directions. Horiz. Blue/Red and Vert.
Blue/Red adjustment range: 1 - 5.
9.3 Installation Style
Flip the image to the left or right, up or down according to the projection state of the projector:
Front, Ceiling Mount (F), Rear or Rear Ceiling mount (R)
9.4 Keystone
Compensate for trapezoidal distortion caused by installation. Independently to the...

10.0  DISPLAY SETUP SETTINGS
R699823 - Yunzi Family User Manual 29 
16:9 content in its original format.
Anamorphic Mode B.
9.7 Screen Adjust
This setting corrects the color balance derived from the reflective characteristics of the screen without altering the
global picture settings. You may select::
•Off: no modification.
•Mode A: slightly reddish.
•Mode B: slightly greenish.
•Mode C: slightly bluish.
9.8 Black Level
For setting the correct black level depending on the light environment. Set the Black...

11.0  FUNCTION SETTINGS
30 R699823 - Yunzi Family User Manual
11.0FUNCTION SETTINGS
11.1 Trigger
The 12V trigger output can be used to control any compatible devices such as motorized screens or anamorphic
kits: The 12V trigger output is 12Vcc, 100mA. Select the trigger output behavior:
•Off: 12V trigger voltage state is always low.
•On (Power):12V trigger state is high when the projector is powered ON. To be used with motorized screens.
•On(Anamo): 12V trigger is high only when Anamorphic Mode A or Mode...